| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 10 |
| Brake pipe excessively corroded | 7 |
| Brakes imbalanced across an axle | 6 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 5 |
| Windscreen wiper does not clear the windscreen effectively | 5 |
| Registration plate lamp issues | 5 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 4 |
| Brake hose excessively deteriorated | 4 |
| Front brake disc in such a condition that it is seriously weakened | 4 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 4 |
| Rear brake application uneven | 3 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 3 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 3 |
| Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Nearside Front Brake hose bulging under pressure |3.6.B.3| | 2 |
| Front Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Exhaust system not adequately supported |7.1.1| | 2 |
| Rear parking brake recording little or no effort | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Rear fog lamp not working |1.3.2b| | 2 |
| Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 2 |
| Rear brake binding | 2 |
| Windscreen washer not working | 2 |
| Brake servo insecurely mounted |3.6.A.2a| | 1 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
| Front Fuel system component leaking |6.1.3 |b| |i|| | 1 |
| Speedometer cannot be illuminated |7.8 |c| |ii|| | 1 |
| Power steering component|s| leaking steeringbox |2.3.3b| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Steering box has a significant oil leak |2.2.D.2e| | 1 |
| Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
| Brake load sensing valve defective and function impaired |3.6.E.3| | 1 |
| Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Rear Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front Statutory seat belt missing |5.1.1| | 1 |
| Offside Front Statutory seat belt missing |5.1.1| | 1 |
| Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| front brake binding |3.7.B.1| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Brake hose damaged | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Nearside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Upper Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside brake disc excessively scored |3.5.1h| | 1 |
| Offside brake disc excessively scored |3.5.1h| | 1 |
| Fuel tank leaking |7.2.3| | 1 |
| Front Fuel system component leaking |7.2.3| | 1 |
| Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Hazard warning switch inoperative |4.4.2 |a| |ii|| | 1 |
| Nearside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Nearside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded steering box |2.2.C.1h| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Horn not working |1.6.2a| | 1 |
| Main beam `tell-tale` not working |1.7.4c| | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Offside Front Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Front Side repeater not working |1.4.A.2c| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Brake pedal spongy |3.3.B.1b| | 1 |
| Nearside Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Headlamp aim not tested |1.8.A.1c| | 1 |
| Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Windscreen wiper blade insecure | 1 |
| Nearside Rear Leaf spring fractured |2.4.B.1a| | 1 |
| Rear Mechanical brake component has restricted free movement | 1 |
| Offside Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Offside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Main beam tell-tale not working |4.9.1 |a| |ii|| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
| Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt rear |2.2.C.1c| | 1 |
| Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Front Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside front brake binding |3.7.B.1| | 1 |
| Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Brake pressure/vacuum build up too slow (1.1.3 (b)) | 1 |
| Brake fluid contaminated (1.8 (a)) | 1 |
| Registration plate issues | 1 |
| Nearside Rear Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
| Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 1 |
| Offside Steering component mounting prescribed area is excessively corroded steering box (2.1.2 (e) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Exhaust has a major leak of exhaust gases SILENCER INPUT PIPE HOLED (6.1.2 (a)) | 1 |
| Offside Rear Electrical wiring insecure and in contact with sharp edges (4.11 (a) (ii)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Lower Body panel insecure (6.2.1 (a) (i)) | 1 |
| Nearside Front Lower Leaf spring to axle fixing bolt insecure SHACKLE BOLT (5.3.1 (a) (i)) | 1 |