| Most common failures | No# failures |
|---|
| Brake pipe excessively corroded | 12 |
| Headlamp aim out of alignment | 9 |
| Registration plate lamp issues | 6 |
| Offside Stop lamp not working |1.2.1b| | 3 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Service brake: efficiency below requirements |3.7.B.7| | 3 |
| Parking brake: efficiency below requirements |3.7.B.7| | 3 |
| Horn not working |1.6.2a| | 3 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Windscreen wiper does not clear the windscreen effectively | 3 |
| Rear parking brake recording little or no effort | 2 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 2 |
| Brake hose excessively deteriorated | 2 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 2 |
| Nearside Headlamp not working on main beam |1.7.5a| | 2 |
| Exhaust system not adequately supported |7.1.1| | 2 |
| Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.4.B.1| | 2 |
| Steering system excessively tight |2.2.D.1| | 2 |
| Front Exhaust system not adequately supported |7.1.1| | 2 |
| Rear brake application uneven | 2 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Nearside Statutory seat belt missing |5.1.1| | 1 |
| Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front front brake binding |3.7.B.1| | 1 |
| Rear brake binding | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Front brake disc excessively pitted |3.5.1h| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Inner Front Fuel hose leaking |7.2.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Rear Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
| Nearside Inner Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Front Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
| Offside Front Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
| Offside Front brake disc excessively pitted |3.5.1h| | 1 |
| Nearside rear brake juddering severely |3.7.A.5b| | 1 |
| Offside Rear Rear fog lamp has a product on the lens so it is not visible from a reasonable distance |1.3.2d| | 1 |
| Offside Rear Rear fog lamp insecure |1.3.2a| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Central Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Body insecure and dangerous to other road users Unable to open bonnet & corrored |6.1.B.1b| | 1 |
| Hazard warning lamps inoperative all 4 not working |1.4.B.1b| | 1 |
| Offside Side repeater not working |1.4.A.2c| | 1 |
| Rear fog lamp not working |1.3.2b| | 1 |
| Brake load sensing valve defective and function impaired |3.6.E.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded bulk head |3.6.C.3| | 1 |
| Offside Seat belt insecurely fixed to the seat missing |5.2.1a| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded step |5.2.6| | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Front Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Rear Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
| Offside Headlamp aim not tested |1.8.A.1c| | 1 |
| Brake servo insecurely mounted |3.6.A.2a| | 1 |
| Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 1 |
| Nearside Rear Leaf spring to axle securing nut insecure |2.4.B.7b| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Steering system excessively tight |2.2.D.1| | 1 |
| Offside Front Steering system excessively tight |2.2.D.1| | 1 |
| Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Offside Leaf spring has excessive side play at eye |shackle| |2.4.B.4| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Nearside Side repeater missing |1.4.A.2b| | 1 |
| Offside Side repeater missing |1.4.A.2b| | 1 |
| Offside Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 1 |
| Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
| Offside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Steering pivot point has excessive play |2.2.B.1g| | 1 |
| Driver`s seat insecure |6.2.A.1| | 1 |
| Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Power steering component|s| leaking |2.3.3b| | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Front brake disc excessively scored |3.5.1h| | 1 |
| Offside Rear Suspension spring mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Nearside Front Upper Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Lower Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Brake pipe leaking |3.6.A.1| | 1 |
| Nearside Front Brake performance not tested |3.7.A.1| | 1 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Brakes imbalanced across an axle | 1 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Emissions not tested Accelerator sticky + exhaust blow (8.2.2.2 (e)) | 1 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Offside Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mounting of leaf spring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mounting of leaf spring (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced holed beneath door (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced holed beneath door (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper wheel arch area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper wheel arch area (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mounting holed (5.3.6 (a) (i)) | 1 |