Most common failures | No# failures |
---|
Brakes imbalanced across an axle | 4 |
Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
Brake pipe excessively corroded | 3 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Headlamp aim out of alignment | 2 |
Brake hose excessively deteriorated | 2 |
Registration plate lamp issues | 2 |
Rear parking brake recording little or no effort | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Rear Brake lining(s) contaminated (1.1.13 (b)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt both link boots |2.1.3 |g| |ii|| | 1 |
Nearside Rear Shock absorbers has a serious fluid leak | 1 |
Nearside Front Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Front Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 1 |
Offside Front Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 1 |
Offside Front Service brake excessively binding |1.2.1 |f|| | 1 |
Offside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Front brake caliper has restricted free movement |3.5.1k| | 1 |
Registration plate issues | 1 |
Nearside Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt drag link |2.1.3 |g| |ii|| | 1 |
Offside Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt drag link |2.1.3 |g| |ii|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Nearside Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Emissions not tested |7.0| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Offside Front Headlamp aim headlamp not in good working order adversely affecting beam image |1.2.4b| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |