| Most common failures | No# failures |
|---|
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 29 |
| Headlamp aim out of alignment | 21 |
| Windscreen wiper does not clear the windscreen effectively | 16 |
| Brake pipe excessively corroded | 14 |
| Brake hose excessively deteriorated | 14 |
| Rear brake binding | 11 |
| Registration plate issues | 10 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
| Brakes imbalanced across an axle | 8 |
| Offside Stop lamp not working |1.2.1b| | 7 |
| Parking brake: efficiency below requirements |3.7.B.7| | 6 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Nearside Stop lamp not working |1.2.1b| | 6 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Registration plate lamp issues | 5 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 5 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Nearside Rear Stop lamp not working |1.2.1b| | 5 |
| Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 5 |
| Front passenger seat cannot be secured in the upright position. |6.2.4| | 4 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 4 |
| Rear parking brake recording little or no effort | 4 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Battery insecure |1.9.1| | 3 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 3 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
| Offside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
| Front brake application uneven | 2 |
| Front front brake binding |3.7.B.1| | 2 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 2 |
| Nearside Headlamp not working on main beam |1.7.5a| | 2 |
| Brake pedal anti-slip provision missing |3.3.A.1b| | 2 |
| Offside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Rear Exhaust mounting missing |7.1.1b| | 2 |
| Service brake: efficiency below requirements |3.7.B.7| | 2 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 2 |
| Direction indicators not working |1.4.A.2c| | 2 |
| Front Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 2 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Nearside front brake binding |3.7.B.1| | 2 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 2 |
| Mechanical brake component has restricted free movement | 2 |
| Offside front brake binding |3.7.B.1| | 2 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Offside Rear brake disc excessively pitted |3.5.1h| | 2 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 2 |
| Indicator switch faulty |1.4.A.1| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 2 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Offside Front Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 2 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Nearside Rear brake disc excessively pitted |3.5.1h| | 2 |
| Nearside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Exhaust emissions carbon monoxide content excessive 9.6% (8.2.1.2 (b)) | 1 |
| Windscreen washer not working | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front Intermediate drop arm excessively corroded and unserviceable |2.2.C.1d| | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Steering system has excessive free play detected at the steering wheel |steering box fitted| |2.2.A.1a| | 1 |
| Front Steering damper leaking oil |2.2.C.1f| | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Exhaust mounting missing |7.1.1b| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
| Exhaust engine idle speed too high |7.3.A.2a| | 1 |
| Nearside Rear front brake binding |3.7.B.1| | 1 |
| front brake juddering severely |3.7.A.2b| | 1 |
| Nearside Steering pivot point has excessive play |2.2.B.1g| | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Front All position lamps not working |1.1.A.3b| | 1 |
| Offside Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Brake fluid warning lamp illuminated |3.6.G.2| | 1 |
| Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Offside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Nearside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Front Exhaust has a major leak of exhaust gases manifold joint blowing |7.1.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Offside Front Body has a projection caused by corrosion wheel arch |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion seal pannel |6.1.C.1| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Offside Front brake disc excessively pitted |3.5.1h| | 1 |
| Front Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering Wheel arch |6.1.A.1| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering Wheel arch |6.1.A.1| | 1 |
| Offside Front Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Under sil |6.1.B.2| | 1 |
| Nearside Front Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Under sil/Front wheel arch |6.1.B.2| | 1 |
| Nearside Rear Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Under sil |6.1.B.2| | 1 |
| Hazard warning switch faulty |1.4.B.1d| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
| Drivers seat backrest cannot be secured in the upright position. (6.2.5 (b) (ii)) | 1 |
| Nearside Front Drivers seat backrest cannot be secured in the upright position. (6.2.5 (b) (ii)) | 1 |
| Nearside Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Rear brake application uneven | 1 |
| Rear brake disc excessively pitted |3.5.1h| | 1 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Front Headlamp aim headlamp not in good working order adversely affecting beam image |1.2.4b| | 1 |
| Nearside Outer Front Steering column shaft locking device missing |2.1.6| | 1 |
| Offside Inner Front Steering column shaft locking device missing |2.1.6| | 1 |
| Offside Outer Front Steering column shaft locking device missing |2.1.6| | 1 |
| Nearside Inner Front Steering column shaft locking device missing |2.1.6| | 1 |
| Offside Rear coil spring cracked |2.4.C.1a| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Obligatory mirror does not provide a view to the rear interior |8.1.2b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Brake pedal spongy |3.3.B.1b| | 1 |
| Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
| Nearside Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WHEEL ARCH (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ANTI ROLL BAR MOUNTING (5.3.6 (a) (i)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front coil spring fractured |2.4.C.1a| | 1 |
| Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Emissions not tested |7.0| | 1 |
| Nearside Front Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Fuel hose leaking under bonnet |7.2.3| | 1 |
| Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Front passenger seat cannot be secured in the upright position. |6.2.4| | 1 |
| Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
| Nearside Front Front position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 1 |
| Offside Front Position lamp not working |4.2.1 |a|| | 1 |
| Offside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 1 |
| Rear Mechanical brake component has restricted free movement | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Steering pivot point has excessive play |2.2.B.1g| | 1 |
| All position lamps not working |1.1.A.3b| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Brake master cylinder leaking hydraulic fluid |3.6.G.1f| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Nearside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Offside Rear brake disc excessively scored |3.5.1h| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Offside Front Electrical wiring insecure |1.9.2a| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Front All position lamps not working |1.1.A.3b| | 1 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Inner Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Bonnet retaining device ineffective |8.4.2| | 1 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
| Offside Front Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Nearside Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Brake cable has restricted free movement |3.5.1k| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 1 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Outer Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Lower Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
| Offside Front Lower Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |