>

MOT History from tests of diesel MERCEDES BENZ 208s year 1988

Review the list of common MERCEDES BENZ 208 failures below or to perform a specific mot history check on your MERCEDES BENZ then use our popular KnowYourCar service

mot history
Pass percent:58.82%
(The average a diesel MERCEDES BENZ 208 year 1988 passes without issue)
Based on:119 MOT Tests
Most common failuresNo# failures
Registration plate lamp issues14
Windscreen wiper does not clear the windscreen effectively9
Headlamp aim out of alignment8
Offside Rear fog lamp not working |1.3.2b|6
Direction indicators not working |1.4.A.2c|4
Brake pipe excessively corroded4
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|4
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3|4
Horn not working |1.6.2a|4
Parking brake: efficiency below requirements |3.7.B.7|4
Brakes imbalanced across an axle4
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|4
Exhaust system not adequately supported |7.1.1|4
Service brake: efficiency below requirements |3.7.B.7|3
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|3
Rear Rear fog lamp not working |1.3.2b|3
Offside Headlamp not working on dipped beam |1.7.5a|3
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|3
Registration plate issues3
Rear fog lamp not working |1.3.2b|3
Rear parking brake recording little or no effort3
Offside Stop lamp not working |1.2.1b|3
Brake load sensing valve seized |3.6.E.3|3
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3|2
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Windscreen wiper not operating automatically when switched on |8.2.1b|2
Rear brake binding2
Nearside Front position lamp|s| not working |1.1.A.3b|2
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a|2
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|2
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Front Direction indicator not working |1.4.A.2c|2
Brake load sensing valve linkage seized |3.6.E.3|2
Rear Exhaust has a major leak of exhaust gases |7.1.2|2
Offside Front Service brake excessively binding (1.2.1 (f))2
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b|2
Exhaust has a major leak of exhaust gases |7.1.2|2
Nearside Stop lamp not working |1.2.1b|2
Nearside Front Passenger`s seat insecure |6.2.A.1|2
Offside Rear fog lamp missing |1.3.2a|1
Nearside Rear reflector missing |1.5.1a|1
Front wheel bearing has excessive play |2.5.A.3c|1
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h|1
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f|1
Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9|1
Headlamp not working on dipped beam x2 (4.1.1 (a) (ii))1
Offside Headlamp not working on main beam (4.1.1 (a) (ii))1
Offside Rear fog lamp not working (4.5.1 (a) (ii))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring hanger (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected spring hanger (5.3.6 (a) (ii))1
Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected arch (5.3.6 (a) (ii))1
Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected arch (5.3.6 (a) (ii))1
Stop lamp(s) not working x2 (4.3.1 (a) (ii))1
Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a|1
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Offside Front Direction indicators not working |1.4.A.2c|1
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Offside Front Inner Seat belt anchorage prescribed area is excessively corroded step |5.2.6|1
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a|1
Offside Headlamp not working on main beam |1.7.5a|1
Offside Rear Direction indicator not working |1.4.A.2c|1
Offside Rear Rear fog lamp not working |1.3.2b|1
Offside Front Position lamp not working |4.2.1 |a||1
Offside Rear Direction indicator not working |4.4.1 |a| |ii||1
Offside Rear fog lamp not working |4.5.1 |a| |ii||1
Rear fog lamp switch inoperative |4.5.3 |a| |ii||1
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Offside Headlamp not working on main beam |4.1.1 |a| |ii||1
Offside Seat belt anchorage likely to become detached in the event of a collision step |7.1.1 |a| |ii||1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected out rigger front end of spring |5.3.6 |a| |ii||1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected out rigger rear end of spring |5.3.6 |a| |ii||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch |5.3.6 |a| |ii||1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis x2 |5.3.6 |a| |ii||1
Central Exhaust has a major leak of exhaust gases |6.1.2 |a||1
Central Exhaust fumes causing a danger to health of persons on board |6.1.2 |b| |ii||1
Offside Headlamp not in a clean condition affecting beam image |1.2.4a|1
Nearside Front Direction indicator not working |1.4.A.2c|1
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a|1
Rear brake application uneven1
Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a|1
Offside Headlamp adversely affected by the operation of another lamp |1.7.5c|1
Stop lamp not working |1.2.1b|1
Hazard warning lamps inoperative |1.4.B.1b|1
Front Indicator tell tale inoperative |1.4.A.2a|1
Nearside Front front brake binding |3.7.B.1|1
Nearside Headlamp not working on dipped beam |1.7.5a|1
Nearside Windscreen wiper blade deteriorated |8.2.2|1
Offside Windscreen wiper blade deteriorated |8.2.2|1
Nearside Seat belt affected by a damaged seat frame |5.2.1b|1
Nearside Front wheel bearing has excessive play |2.5.A.3c|1
Offside Front wheel bearing has excessive play |2.5.A.3c|1
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b|1
Offside Stub axle has excessive vertical movement between stub axle and axle beam |2.5.A.1a|1
Fuel system component leaking |7.2.3|1
Rear Brake linkage has abnormal movement of levers indicating excessive wear |3.5.1f|1
Nearside rear brake recording little or no effort |3.7.B.5a|1
Offside Seat belt retracting mechanism defective |5.2.5b|1
Nearside Front Stub axle has excessive vertical movement between stub axle and axle beam |2.5.A.1a|1
Offside Front Drag link end ball joint has excessive play |2.2.B.1f|1
Rear Brake load sensing valve linkage obviously incorrectly adjusted |3.6.E.3|1
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b|1
Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Front Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Rear Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Rear Stop lamp not working |1.2.1b|1
Offside Front Headlamp not working on dipped beam |1.7.5a|1
Centre Exhaust has a major leak of exhaust gases |7.1.2|1
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Track rod end ball joint has excessive play |2.2.B.1f|1
Offside Track rod end ball joint has excessive play |2.2.B.1f|1
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1|1
Offside Body has a sharp edge caused by corrosion |6.1.C.1|1
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1|1
Front Exhaust has a major leak of exhaust gases |7.1.2|1
Bonnet cannot be secured in the closed position |8.4.1|1
Nearside Rear rear brake recording little or no effort |3.7.B.5a|1
Offside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Fuel tank leaking |7.2.3|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Body has a sharp edge caused by corrosion |6.1.C.1|1
Offside Body has a projection caused by corrosion |6.1.C.1|1
Offside Front Front wheel bearing has excessive play |2.5.A.3c|1
Nearside Headlamp not working on main beam |1.7.5a|1
Rear Body has a sharp edge caused by corrosion |6.1.C.1|1
Offside Rear Position lamp adversely affected by the operation of another lamp too bright (4.2.3 (c))1
Offside Rear Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a))1
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Horn not working button missing (7.7 (a) (ii))1
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Offside Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Centre Exhaust system not adequately supported |7.1.1|1
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b|1
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b|1
Front Headlamp aim beam image kick up to the offside |1.8|1
Front Main beam `tell-tale` not working |1.7.4c|1
Offside Front Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Offside Front Headlamp not working on main beam |1.7.5a|1
Nearside Rear Brake load sensing valve linkage seized |3.6.E.3|1
Rear fog lamp tell tale not working |1.3.1b|1
Nearside Rear Direction indicators not working |1.4.A.2c|1
Brake fluid warning lamp illuminated |3.6.G.2|1
Nearside Rear Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e|1
Offside Front Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e|1
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f|1
Electrical wiring insecure |1.9.2a|1
Emissions not tested |7.4.B.1|1
Nearside Rear Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e|1
Offside Inner Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3|1
Nearside Outer Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3|1
Centre Stop lamp not working |1.2.1b|1
Nearside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1|1
Driver`s seat insecure |6.2.A.1|1
Central Stop lamp not working |1.2.1b|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering of chassis |6.1.A.1|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Emissions not tested due to exhaust blow |7.4.B.1|1
Offside Front front brake binding |3.7.B.1|1
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy