Most common failures | No# failures |
---|
Rear brake binding | 7 |
Parking brake: efficiency below requirements |3.7.B.7| | 5 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 3 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 3 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 3 |
Exhaust system not adequately supported |7.1.1| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Registration plate issues | 2 |
Rear Exhaust system not adequately supported |7.1.1| | 2 |
Offside Front Direction indicator not working |1.4.A.2c| | 2 |
Headlamp aim out of alignment | 2 |
Offside front brake binding |3.7.B.1| | 2 |
Brake performance not tested |3.7.A.1| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Registration plate lamp issues | 2 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Exhaust emits clearly visible black smoke during acceleration |7.4.A2| | 2 |
Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Brake hose excessively deteriorated | 1 |
Power steering pump drive system defective |2.3.6| | 1 |
Offside Front Mechanical brake component securing device loose |3.5.1i| | 1 |
Nearside Front Mechanical brake component securing device loose |3.5.1i| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Nearside Rear front brake binding |3.7.B.1| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
Nearside Rear position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
Offside Rear position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
Exhaust emits dense blue smoke at idle |7.4.A.1| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded centre door post |5.2.6| | 1 |
Offside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Passenger`s seat insecure |6.2.A.1| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded centre under floor |5.2.6| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded under sill |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
Battery leaking electrolyte |1.9.1| | 1 |
Central Brake actuating linkage mounting prescribed area is excessively corroded floor |3.3.A.2| | 1 |
Steering system has excessive free play detected at the steering wheel |steering box fitted| |2.2.A.1a| | 1 |
Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 1 |
Exhaust emits excessive dense blue smoke during acceleration |7.4.A2| | 1 |
Offside Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Offside Front Drag link end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Indicator switch faulty |1.4.A.1| | 1 |
Speedometer cannot be illuminated. |6.7.3| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Indicator tell tale inoperative |1.4.A.2a| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Horn not working |1.6.2a| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
Nearside Front Brake hose leaking |3.6.A.1| | 1 |
Offside Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Steering component mounting prescribed area is excessively corroded floor pan |2.2.C.1h| | 1 |
Nearside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Front Fuel system component leaking |7.2.3| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |