Most common failures | No# failures |
---|
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 32 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 24 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 22 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
Headlamp aim out of alignment | 19 |
Exhaust is leaking and excessively noisey |7.1.1b| | 17 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 12 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 12 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
Registration plate issues | 9 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Horn not working |1.7.3a| | 7 |
Stop lamp remains on when the brake is released |1.3.1e| | 7 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 7 |
Headlamp aim not tested |1.6| | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Front position lamp incorrect colour |1.1.2a| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear position lamp incorrect colour |1.1.2b| | 3 |
Stop lamp emits other than a steady red light |1.3.1b| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 3 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Front position lamp insecure |1.1.1c| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Indicator switch defective |1.5.4| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Front Brake lever pivots excessively worn |3.1.3a| | 2 |
Rear Brake lever pivots excessively worn |3.1.3a| | 2 |
Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear spring fractured |2.4.A1b|i|| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Stop lamp does not illuminate immediately a brake applies Both |1.3.1a| | 1 |
Direction indicators flashing more than 120 times per minute All |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Offside Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Centre Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies both switches |1.3.1a| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Brake lever attachment screws loose |3.1.2b| | 1 |
Headlamp at least one does not illuminate on dipped beam Poor Headlamp Intensity |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam Poor Headlamp Intensity |1.2.2a|ii|| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Horn control not readily accesible. |1.7.2a| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Built up wheel has a missing rivet/s |4.2.1c| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Front Direction indicator obscured |1.5.1a| | 1 |
Offside Front Direction indicator obscured |1.5.1a| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Front Brake grabbing severely |1.2.1 |c|| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Nearside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Offside Rear Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Offside Front Brake lever attachment screws loose |3.1.2b| | 1 |
Rear Rear suspension component loose |2.4.A.1a| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
Nearside Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Offside Rear Exhaust mounting missing |7.1.1c| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Offside Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Nearside Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Nearside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Offside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Steering operation impeded by a fairing |2.1.4 |e|| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Rear wheel bearings have excessive free play final drive |2.4.A.2c| | 1 |
Rear Rear suspension bush has excessive free play engine mounts |2.4.A2a|i|| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Shock absorber insecurely attached top mount nut loose (5.3.2 (a) (i)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |