Most common failures | No# failures |
---|
Headlamp aim out of alignment | 35 |
Steering headbearing has excessive free play |2.2.2| | 33 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 26 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 24 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 22 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 18 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 15 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 14 |
Registration plate issues | 14 |
Front Steering headbearing has excessive free play |2.2.2| | 12 |
Exhaust is leaking and excessively noisey |7.1.1b| | 11 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
Stop lamp remains on when the brake is released |1.3.1e| | 9 |
Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
Horn not working |1.7.3a| | 8 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
Headlamp aim not tested |1.6| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Headlamp insecure |1.2.3b| | 6 |
Fairings insecure and likely to impede the steering |2.1.2e| | 6 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
An item not tested |Manual| | 4 |
Front suspension has inadequate damping effect. |2.3.6c| | 4 |
Nearside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Brake disc|s| excessively worn |3.2.A1l| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Headlamp insecure |1.2.3b| | 3 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 3 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Front Direction indicator insecure |1.5.3b| | 3 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Handlebar deformed |2.1.1b| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Position lamp switch insecure |1.1.4b| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Fairing insecure and likely to impede the steering |2.1.2e| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 2 |
Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear Direction indicators not working |1.5.1c| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Indicator tell tale not functioning |1.5.2| | 2 |
Lower Steering headbearing has excessive free play |2.2.2| | 2 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Fairing so located that it is likely to impede the steering |2.1.2e| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Rear Wheel more than one fixing loose |5.2.1 |a| |ii|| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |
Wheel inadequatly repaired significantly reducing the original strength |4.2.1a| | 1 |
Rear Brake lever is inoperative |3.1.3c| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Lower Horn not working |1.7.3a| | 1 |
Centre Front Upper Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Rear Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Lower Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Rear Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Front Front suspension assembly component loose |2.3.1| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Stop lamp insecure |1.3.3b| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Brake component is fractured |3.1.5| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear suspension component excessively bent |2.4.A.1a| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Indicator switch defective Indicator switch intermittent in both direction selections |1.5.4| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp Hi/Lo beam selection intermittent, sometimes low beam fails to illuminate. |1.2.2b|i|| | 1 |
Front position lamp incorrect colour Blue side lights |1.1.2a| | 1 |
Headlamp aim headlamp deteriorated and function impaired Bulb filaments distorted causing incorrect beam |1.2.3a| | 1 |
Direction indicators affected by the operation of another lamp Flashing too fast and erratically when either brake light applied |1.5.1c| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Nearside Front Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Front Front position lamp incorrect colour |1.1.2a| | 1 |
Front Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Shock absorber has negligible damping effect front forks (5.3.2 (b)) | 1 |
Front Position lamp missing (4.2.1 (a)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Centre Front Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Front Brake hose which buldges |3.2.B4| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Front suspension assembly component excessively bent |2.3.1| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Offside Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Rear reflector on motorcycle dirty and function impaired |1.4.2a| | 1 |
Rear position lamp obscured more than 50% |1.1.1d| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Brake lever cannot be released smoothly |3.1.3d| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Rear Rear suspension component loose |2.4.A.1a| | 1 |
Front Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Centre Upper Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Vehicle identification number not legible |6.3.5a| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Outer Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front Upper Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |