Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 4 |
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 2 |
Emissions not tested (8.2.1.2 (d)) | 2 |
Rear brake binding | 2 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Registration plate lamp issues | 2 |
Headlamp aim out of alignment | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Central Exhaust has a major leak of exhaust gases cat area |7.1.2| | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 1 |
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt both sides (5.3.4 (b) (ii)) | 1 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
Nearside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn D bush |5.3.4 |a| |i|| | 1 |
Offside Rear Anti-roll bar pin or bush excessively worn D bush |5.3.4 |a| |i|| | 1 |
Fuel cap/sealing device missing (6.1.3 (b) (i)) | 1 |
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/arch (5.3.6 (a) (i)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/arch (5.3.6 (a) (i)) | 1 |
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/floor (5.3.6 (a) (i)) | 1 |