| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 7 |
| Registration plate lamp issues | 5 |
| Brake pipe excessively corroded | 3 |
| Battery insecure |1.9.1| | 3 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Windscreen washer not working | 2 |
| Horn not working |1.6.2a| | 2 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Anti-lock braking system warning lamp indicates an ABS fault | 2 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
| Nearside Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arches |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arches |2.4.A.3| | 1 |
| Offside Rear fog lamp missing |1.3.2a| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Central Rear Emissions unable to be completed exhaust leaking to extent unable to test (8.2.1.2 (d)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D BUSH (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn drop link bush (5.3.4 (a) (i)) | 1 |
| Nearside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Body component damaged and likely to cause injury n/s rear light lens (6.2.1 (a) (i)) | 1 |
| Offside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.1 |c| |ii|| | 1 |
| Rear Exhaust has a major leak of exhaust gases flexi |7.1.2| | 1 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance suspect wrong bulb fitted |1.2.1d| | 1 |
| Nearside Front Upper Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |