>

MOT History from tests of diesel MAZDA MOTORs year 2006

Review the list of common MAZDA MOTOR failures below or to perform a specific mot history check on your MAZDA then use our popular KnowYourCar service

mot history
Pass percent:51.72%
(The average a diesel MAZDA MOTOR year 2006 passes without issue)
Based on:58 MOT Tests
Most common failuresNo# failures
Windscreen wiper does not clear the windscreen effectively7
Brake pipe excessively corroded4
Nearside Front Position lamp not working (4.2.1 (a) (ii))3
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))3
Rear fog lamp not working (4.5.1 (a) (ii))2
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))2
Offside Rear Towbar fractured seriously affecting its strength within 30cm of towbar mounting at towbar mounting point (6.1.6 (i) (i))1
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Offside Rear Towbar component fractured at towbar mounting point (6.1.6 (a))1
Brake performance not tested nearside front brake seized and pads worn below 1.5mm (1.2.1 (g))1
Brake hose excessively deteriorated1
Horn not working (7.7 (a) (ii))1
Subframe mounting prescribed area excessively corroded significantly reducing structural strength front crossmember (5.3.6 (a) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength front of inner wing (5.3.6 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength front of inner wing (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))1
Offside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))1
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2|1
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|1
Rear fog lamp not working |1.3.2b|1
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b|1
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Rear Rear fog lamp not working |1.3.2b|1
Centre Front Exhaust has a major leak of exhaust gases |7.1.2|1
Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2|1
Offside Rear Rear fog lamp insecure |1.3.2a|1
Offside Rear fog lamp not working |1.3.2b|1
Nearside Battery insecure |1.9.1|1
Exhaust has a major leak of exhaust gases backbox |7.1.2|1
Exhaust has a major leak of exhaust gases centre section |7.1.2|1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill |6.2.2 |d| |i||1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill |6.1.1 |c| |i||1
Nearside Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Rear Statutory seat belt missing |5.1.1|1
Offside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1|1
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))1
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))1
Power steering malfunctioning (2.1.5 (a))1
Exhaust emits visible black smoke at idle (8.2.1.2 (f))1
Offside Front Service brake excessively binding (1.2.1 (f))1
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i))1
Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))1
Windscreen washer not working 1
Stop lamp(s) all not working (4.3.1 (a) (iii))1
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill X3 Places (6.2.2 (d) (i))1
Nearside Rear Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced Sill Previous Repair Been Made Up Of Body Filler (6.1.1 (d) (i))1
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill X 2 Places (6.2.2 (d) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Box Section/Jacking Point (6.1.1 (c) (i))1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))1
Emissions not tested Due To Excessive Smoke (8.2.2.2 (e))1
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))1
Horn not working (7.7 (a))1
Offside Headlamp light intensity severely reduced (4.1.4 (a))1
Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill holed and corroded (6.2.2 (d) (i))1
Anti-lock braking system warning lamp indicates an ABS fault1
Nearside Battery insecure and likely to cause a short circuit (4.13 (a) (ii))1
Offside Battery insecure and likely to cause a short circuit (4.13 (a) (ii))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i))1
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Front Service brake excessively binding (1.2.1 (f))1
Rear Service brake excessively binding (1.2.1 (f))1
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))1
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill holed and corroded (6.2.2 (d) (i))1
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt splits on bellows (2.1.3 (g) (ii))1
Registration plate lamp issues1
Central Exhaust has a major leak of exhaust gases silencer (6.1.2 (a))1
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))1
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy