| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 4 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 3 |
| Windscreen wiper does not clear the windscreen effectively | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Nearside Rear Seat belt missing (7.1.2 (a)) | 1 |
| Offside Rear Seat belt missing (7.1.2 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger and inner wing (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Front Upper Shock absorbers insecurely attached (5.3.2 (a) (i)) | 1 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired arch, rearmost (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired outrigger (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area is inadequately repaired arch, rearmost (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired outrigger (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired arch (5.3.6 (a) (i)) | 1 |
| Offside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Emissions unable to be completed exhaust leak (8.2.2.2 (e)) | 1 |
| Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Offside Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Nearside Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Windscreen washer not working | 1 |
| Emissions unable to be completed ENGINE OIL LEAKS, UNABLE TO CHECK OIL LEVEL (8.2.2.2 (e)) | 1 |
| Front Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Front Fluid leak harmful to the environment or a risk to other road users FUEL (8.4.1 (a) (i)) | 1 |
| Nearside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x-member (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x-member (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger / chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Emissions not tested major exhaust leak (8.2.2.2 (e)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Complete inner sill |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Front , middle and rear inner sill |6.2.2 |d| |i|| | 1 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Battery insecure |1.9.1| | 1 |
| Nearside Front Valve stem seriously damaged |4.1.D.1e| | 1 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |