| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 40 |
| Offside Rear fog lamp not working |1.3.2b| | 18 |
| Headlamp aim out of alignment | 18 |
| Registration plate lamp issues | 13 |
| Brake pipe excessively corroded | 11 |
| Rear fog lamp not working |1.3.2b| | 11 |
| Offside Stop lamp not working |1.2.1b| | 9 |
| Rear fog lamp switch missing |1.3.1a| | 7 |
| Anti-lock braking system warning lamp indicates an ABS fault | 7 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 7 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 7 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 6 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
| Horn not working |1.6.2a| | 5 |
| Rear fog lamp tell tale not working |1.3.1b| | 5 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Parking brake: efficiency below requirements |3.7.B.7| | 5 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 4 |
| Offside Headlamp not working on main beam |1.7.5a| | 4 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
| Rear parking brake recording little or no effort | 4 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 4 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
| Nearside Stop lamp not working |1.2.1b| | 4 |
| Rear fog lamp missing |1.3.2a| | 3 |
| Offside Rear fog lamp missing |1.3.2a| | 3 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
| Windscreen has damage | 3 |
| Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Front brake application uneven | 3 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 3 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 3 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Parking brake lever has no reserve travel |3.1.6b| | 3 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 3 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 3 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 3 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Offside Rear Rear fog lamp missing |1.3.2a| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Anti-roll bar linkage insecure |2.4.G.1| | 2 |
| Service brake: efficiency below requirements |3.7.C.1a| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded INNER WHEEL ARCH |2.4.A.3| | 2 |
| Nearside Headlamp not working on main beam |1.7.5a| | 2 |
| Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Rear fog lamp tell tale missing |1.3.1b| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Rear Rear fog lamp not working |1.3.2b| | 2 |
| Front brake disc excessively pitted |3.5.1h| | 2 |
| Service brake: efficiency below requirements |3.7.B.7| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Brake performance not tested (1.2.1 (g)) | 2 |
| Offside Rear fog lamp emits a light other than red |1.3.2e| | 2 |
| Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
| Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
| Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Rear fog lamp emits a light other than red |1.3.2e| | 2 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
| Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 2 |
| Rear brake binding | 2 |
| Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 2 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 2 |
| Registration plate issues | 2 |
| front brake juddering severely |3.7.A.2b| | 2 |
| Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
| Brakes imbalanced across an axle | 2 |
| Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Front brake disc in such a condition that it is seriously weakened | 2 |
| Nearside Front Upper Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users (8.2.2.2 (c)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired under rad (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Brake performance not tested |3.7.A.1| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded DOOR STEP IN PLACES |5.2.6| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded DOOR STEP IN PLACES |5.2.6| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded SILL IN PLACES |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded CHASSIS BY SHOCK ABSORBER |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting INNER WHEEL ARCH AREA |6.6.6| | 1 |
| Nearside Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting INNER ARCH AREA IN PLACES |6.6.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded OUTER SILL IN PLACES |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded OUTER SILL |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded CHASSIS ABOVE COIL SPRING |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded INNER WHEEL ARCH |2.4.A.3| | 1 |
| Offside Inner Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded SILL IN PLACES |5.2.6| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded SILL IN PLACES |5.2.6| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded SILL SECTION |2.4.A.3| | 1 |
| Nearside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg spring mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg rear spring mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Shock absorbers has a serious fluid leak | 1 |
| Offside Front Shock absorbers has a serious fluid leak | 1 |
| Offside Front Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Main beam `tell-tale` not working |1.7.4c| | 1 |
| Nearside Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Brake hose excessively deteriorated | 1 |
| Offside Rear brake disc contaminated by oil |3.5.1h| | 1 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded / nearside rear outer sills |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner / outer wheel arch |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured chassis |2.4.A.3| | 1 |
| Service brake juddering severely |3.7.C.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 1 |
| Rear Exhaust has a major leak of exhaust gases Rear box |7.1.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced extensive from front of inner arch to and including rear cross member |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced extensive from front of arch extending past spring mounting |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced to rear of wheel arch, extending through to inner sill. |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength forward arm mount, strengthening plate to side. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail excessively corroded, also spring upper mounting. |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail excessively corroded, also spring upper mounting. |5.3.6 |a| |i|| | 1 |
| Nearside Rear Towbar excessively corroded within 30cm of towbar mounting chassis/cross member |6.1.6 |i| |i|| | 1 |
| Lower Steering pivot point has excessive play |2.2.B.1g| | 1 |
| Nearside Rear Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Rear Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Steering locking device missing |2.2.C.1g| | 1 |
| Offside Front Steering locking device missing |2.2.C.1g| | 1 |
| Anti-lock braking system warning lamp does not illuminate |3.4.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded INNER SILL |2.4.A.3| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Rear Mechanical brake component has restricted free movement | 1 |
| Emissions not tested |7.0| | 1 |
| rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Front Headlamp insecure |1.7.3| | 1 |
| Offside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Front Headlamp aim projected beam image is obviously incorrect Both front headlight images distorted and no distinct line or kick up visible. (4.1.2 (c)) | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt Top boot burst. (5.3.4 (b) (ii)) | 1 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Rear Seat belt not functioning as intended |7.1.2 |c|| | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Rear Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Brake pipe inadequately supported |3.6.B.1| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Statutory seat belt missing |5.1.1| | 1 |
| Offside Headlamp light intensity severely reduced dipped beam (4.1.4 (a)) | 1 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Front Road wheel cracked |4.2.A.1a| | 1 |
| Rear Seat belt not functioning as intended centre lap seatbelt is wedged under the seat base |7.1.2 |c|| | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
| Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Rear fog lamp switch missing |4.5.3 |a| |ii|| | 1 |
| Rear fog lamp tell-tale not working |4.9.1 |a| |ii|| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f)) | 1 |
| Offside Rear Coil spring fractured or broken |5.3.1 |b| |i|| | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Rear Rear fog lamp emits a light other than red white light |1.3.2e| | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Emissions not tested excessive soot ,continually blocking equipment (8.2.2.2 (e)) | 1 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 1 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Emissions not tested (8.2.2.2 (e)) | 1 |
| Emissions not tested |7.3.A.1| | 1 |
| Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting missing Pivot on axle. |5.3.3 |a| |ii|| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
| Centre Exhaust has a major leak of exhaust gases (7.1.2) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded Sill & wheel arch (2.4.A.3) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded Sill & wheel arch (2.4.A.3) | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2) | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion Wheel Arch (6.1.C.1) | 1 |
| Offside Rear Body has a sharp edge caused by corrosion Wheel Arch (6.1.C.1) | 1 |
| Rear fog lamp not working (1.3.2b) | 1 |
| Subframe mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a) | 1 |
| Electrical wiring insecure Under bonnet (1.9.2a) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded Sill (2.4.A.3) | 1 |
| Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a) | 1 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear fog lamp has less than 50% of the light sources illuminating |1.3.2b| | 1 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Rear Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Lower Ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Front Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear brake disc excessively pitted |3.5.1h| | 1 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Inner Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Leaf spring cracked |2.4.B.1a| | 1 |
| Nearside Front Upper Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Offside Front Upper Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Power steering component|s| leaking |2.3.3b| | 1 |
| Offside Headlamp insecure |1.7.3| | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Brake load sensing valve inoperative |3.6.E.3| | 1 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Rear Direction indicators not working |1.4.A.2c| | 1 |
| Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Stop lamp not working |1.2.1b| | 1 |
| Offside Rear fog lamp insecure |1.3.2a| | 1 |
| Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Headlamp aim not tested |1.8.A.1c| | 1 |
| Nearside Rear rear brake grabbing severely |3.7.A.5b| | 1 |
| Offside Outer Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
| Nearside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Exhaust emits excessive smoke or vapour of any colour |7.4.B.4| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
| Front Exhaust has a part missing |7.1.1a| | 1 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
| Offside Steering rack gaiter split |2.2.D.2d| | 1 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front Lower Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement front bush |2.4.G.2| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement Rear bush |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Nearside Steering locking device missing |2.2.C.1g| | 1 |
| Offside Steering locking device missing |2.2.C.1g| | 1 |
| Offside Rear Wheel nut|s| missing |4.2.A.1e| | 1 |
| Rear fog lamp emits a light other than red lens damaged |1.3.2e| | 1 |
| Battery insecure |1.9.1| | 1 |
| Rear Body component corroded and likely to cause injury Wheel arches have sharp edges (6.2.1 (a) (i)) | 1 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Rear Exhaust system insecure box (6.1.2 (a)) | 1 |
| Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Central Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Suspension rod ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Front Suspension rod ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Rear Rear fog lamp likely to become detached |4.5.1 |c| |ii|| | 1 |
| Nearside Windscreen wiper blade missing |8.2.2| | 1 |
| Offside Windscreen wiper blade missing |8.2.2| | 1 |
| Headlamp excessively deteriorated so that the light output is severely reduced o s n s front |1.7.5a| | 1 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Suspension component attachment bracket/mounting damaged and seriously weakened Trailing arm forward mount damaged and fouling/chaffing arm (5.3.3 (b) (i)) | 1 |
| Nearside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Lower Steering column universal joint has excessive play |2.1.5| | 1 |
| Centre Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected cross member |5.3.6 |a| |ii|| | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values |8.2.2.2 |f|| | 1 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt split along seam (6.1.7 (g) (ii)) | 1 |
| Offside Front Outer Suspension component ball joint dust cover no longer prevents the ingress of dirt lower arm ball joint dust cover split (5.3.4 (b) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember holed+corroded to excess (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front panel under battery tray holed+corroded to excess (6.1.1 (c) (i)) | 1 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Service brake excessively fluctuating |1.2.1 |e|| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 1 |
| Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement saddle bush |2.4.G.2| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Nearside Rear Exhaust mounting missing |7.1.1b| | 1 |