MOT History from tests of petrol MAZDA E2000s year 1987

Review the list of common MAZDA E2000 failures below or to perform a specific mot history check on your MAZDA then use our popular KnowYourCar service

mot history

Pass percent:21.43%

(The average a petrol MAZDA E2000 year 1987 passes without issue)

Based on:14 MOT Tests

Most common failures	No# failures
Rear brake application uneven	3
Rear fog lamp tell tale not working \|1.3.1b\|	2
Offside Rear fog lamp not working \|1.3.2b\|	2
Offside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	2
Registration plate lamp issues	2
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Offside Rear Suspension component mounting prescribed area is inadequately repaired \|2.4.A.3\|	2
Rear Exhaust has part of the system excessively deteriorated \|7.1.1a\|	2
Rear Exhaust system not adequately supported \|7.1.1\|	2
Horn not working \|1.6.2a\|	2
Nearside Side repeater not working \|1.4.A.2c\|	1
Offside Front Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Horn not loud enough to be heard by another road user \|1.6.2b\|	1
Hazard warning switch insecure \|1.4.B.1d\|	1
Rear Spare wheel insecure \|6.4.2\|	1
Nearside Rear Rear position lamp\|s\| incorrect colour \|1.1.A.3e\|	1
Nearside Rear Rear position lamp\|s\| incomplete \|1.1.4a\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Steering component mounting prescribed area is excessively corroded \|2.2.C.1h\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Outer Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Outer Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Nearside Rear Braking system leaking \|3.6.A.1\|	1
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` \|8.3.1b\|	1
Offside Rear Stop lamp not working \|1.2.1b\|	1
Nearside Front Headlamp not working on main beam \|1.7.5a\|	1
Nearside Front All position lamps not working \|1.1.A.3b\|	1
Rear parking brake recording little or no effort	1
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Windscreen wiper does not clear the windscreen effectively	1
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Offside Rear Leaf spring fractured \|2.4.B.1a\|	1
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Rear fog lamp not working \|1.3.2b\|	1
Rear brake binding	1
Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Fuel tank leaking \|7.2.3\|	1
Nearside Front Front wheel bearing has excessive play \|2.5.A.3c\|	1
Wheel insecure \|4.2.A.1c\|	1
Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Brake pipe excessively corroded	1
Offside Front Shock absorber has a serious fluid leak \|2.7.3\|	1
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear brake application uneven	3
Rear fog lamp tell tale not working \|1.3.1b\|	2
Offside Rear fog lamp not working \|1.3.2b\|	2
Offside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	2
Registration plate lamp issues	2
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Offside Rear Suspension component mounting prescribed area is inadequately repaired \|2.4.A.3\|	2
Rear Exhaust has part of the system excessively deteriorated \|7.1.1a\|	2
Rear Exhaust system not adequately supported \|7.1.1\|	2
Horn not working \|1.6.2a\|	2
Nearside Side repeater not working \|1.4.A.2c\|	1
Offside Front Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Horn not loud enough to be heard by another road user \|1.6.2b\|	1
Hazard warning switch insecure \|1.4.B.1d\|	1
Rear Spare wheel insecure \|6.4.2\|	1
Nearside Rear Rear position lamp\|s\| incorrect colour \|1.1.A.3e\|	1
Nearside Rear Rear position lamp\|s\| incomplete \|1.1.4a\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Steering component mounting prescribed area is excessively corroded \|2.2.C.1h\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Outer Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Outer Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Nearside Rear Braking system leaking \|3.6.A.1\|	1
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` \|8.3.1b\|	1
Offside Rear Stop lamp not working \|1.2.1b\|	1
Nearside Front Headlamp not working on main beam \|1.7.5a\|	1
Nearside Front All position lamps not working \|1.1.A.3b\|	1
Rear parking brake recording little or no effort	1
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Windscreen wiper does not clear the windscreen effectively	1
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Offside Rear Leaf spring fractured \|2.4.B.1a\|	1
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Rear fog lamp not working \|1.3.2b\|	1
Rear brake binding	1
Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Fuel tank leaking \|7.2.3\|	1
Nearside Front Front wheel bearing has excessive play \|2.5.A.3c\|	1
Wheel insecure \|4.2.A.1c\|	1
Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Brake pipe excessively corroded	1
Offside Front Shock absorber has a serious fluid leak \|2.7.3\|	1
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1

MOT History from tests of petrol MAZDA E2000s year 1987

Find us on Facebook