Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 30 |
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 22 |
Registration plate lamp issues | 19 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 19 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 17 |
Headlamp aim out of alignment | 16 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 10 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 10 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 10 |
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 9 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 9 |
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 9 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 8 |
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 8 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 7 |
Anti-lock braking system warning lamp indicates an ABS fault | 7 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 6 |
Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 6 |
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 6 |
Windscreen washer not working | 6 |
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 6 |
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 6 |
Registration plate issues | 6 |
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 5 |
Offside Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 5 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 5 |
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 5 |
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 5 |
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 5 |
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 5 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 5 |
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 4 |
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 4 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 4 |
Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 4 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 4 |
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 4 |
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 4 |
Brake pipe excessively corroded | 4 |
Brakes imbalanced across an axle | 4 |
Horn not working (7.7 (a)) | 3 |
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 3 |
Oil leaking excessively from engine (8.4.1 (a) (i)) | 3 |
Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 3 |
Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 3 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 3 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 3 |
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 3 |
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 3 |
Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 3 |
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii)) | 3 |
Offside Headlamp lens seriously defective (4.1.1 (b) (ii)) | 3 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 3 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 3 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 3 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 3 |
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 3 |
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 3 |
Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 3 |
Nearside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 2 |
Rear fog lamp missing (4.5.1 (a) (ii)) | 2 |
Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 2 |
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
Nearside Front Front passenger door cannot be opened from inside the vehicle (6.2.3 (a)) | 2 |
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 2 |
Offside Rear Shock absorbers has a serious fluid leak | 2 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 2 |
Offside Rear Lower Rear fog lamp does not emit a steady red light lens cover faded (4.5.4 (a)) | 2 |
Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii)) | 2 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 2 |
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Emissions not tested (8.2.1.2 (d)) | 2 |
Rear fog lamp light intensity significantly reduced (4.5.4 (a)) | 2 |
Offside Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 2 |
Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 2 |
Front Service brake excessively fluctuating (1.2.1 (e)) | 2 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 2 |
Rear fog lamp obviously incorrectly positioned (4.5.4 (a)) | 2 |
Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
Offside Rear Electrical wiring insecure and in contact with sharp edges (4.11 (a) (ii)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill / arch (5.3.6 (a) (i)) | 1 |
Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii)) | 1 |
Undertray insecure (8.1.1 (b) (i)) | 1 |
Bonnet cannot be secured in the closed position (3.1 (b) (i)) | 1 |
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i)) | 1 |
Nearside Front Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i)) | 1 |
Offside Front Steering linkage ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
Rear fog lamp does not emit a steady red light Bulb badly faded (4.5.4 (a)) | 1 |
Headlamp aim projected beam image is obviously incorrect Both headlamps (4.1.2 (c)) | 1 |
Rear Lower Anti-roll bar linkage pin or bush excessively worn OS and NS (5.3.4 (a) (i)) | 1 |
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
Nearside Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Offside Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Steering rack has excessive free play detected at the steering wheel (steering rack fitted) excessive free play due to worn lower steering column u/j. (2.3 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength At Lower arm mounting (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength At Lower arm mounting (5.3.6 (a) (i)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
Offside Rear Anti-roll bar linkage pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Shock absorbers has a serious fluid leak Both rear (5.3.2 (b)) | 1 |
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i)) | 1 |
Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Offside Rear Road wheel badly distorted |5.2.2 |c| |i|| | 1 |
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Seat belt missing stalk under seat (7.1.2 (a)) | 1 |
Offside Rear Seat belt missing centre (7.1.2 (a)) | 1 |
Nearside Rear Seat belt missing centre (7.1.2 (a)) | 1 |
Headlamp aim projected beam image is obviously incorrect Both (4.1.2 (c)) | 1 |
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits limit 0.30%, reading 0.36% (8.2.1.2 (b)) | 1 |
Offside Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i)) | 1 |
Emissions not tested engine idles on three cylinders,causing c.o.to be very high (8.2.1.2 (d)) | 1 |
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 1 |
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected by suspension arm (5.3.6 (a) (ii)) | 1 |
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Suspension arm mount (5.3.6 (a) (ii)) | 1 |
Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner sill section (5.3.6 (a) (ii)) | 1 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Anti-lock braking system wiring excessively damaged (1.6 (d)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength hole in outer sill (5.3.6 (a) (i)) | 1 |
Seat belt anchorage prescribed area strength or continuity significantly reduced o/s & n/s front sill under vehicle (7.1.1 (a) (i)) | 1 |
Vehicle structure is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached o/s & n/s rear valance (6.1.6 (i) (ii)) | 1 |
Nearside Rear Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded and holed (7.1.1 (a) (i)) | 1 |
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre inner sill sill corroded and holed (7.1.1 (a) (i)) | 1 |
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded and holed (7.1.1 (a) (i)) | 1 |
Exhaust system insecure rear heat shield (6.1.2 (a)) | 1 |
Offside Front Headlamp aim projected beam image is obviously incorrect no pattern (4.1.2 (c)) | 1 |
Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sills (6.1.1 (c) (i)) | 1 |
Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 1 |
Steering column universal joint deformed to the extent that steering is affected (2.1.3 (c) (ii)) | 1 |
Rear Exhaust has a major leak of exhaust gases Flexy (6.1.2 (a)) | 1 |
Nearside Front Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Rear Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Seat belt anchorage prescribed area strength or continuity significantly reduced Near & Off Side Inner Sill (Marked) (7.1.1 (a) (i)) | 1 |
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Rear Rear fog lamp does not emit a steady red light shows white light (4.5.4 (a)) | 1 |
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill back (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill back (5.3.6 (a) (i)) | 1 |
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill back (5.3.6 (a) (i)) | 1 |
Rear fog lamp does not emit a steady red light incorrect colour (4.5.4 (a)) | 1 |
Exhaust has a major leak of exhaust gases flexi (6.1.2 (a)) | 1 |
Central Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect also product on lens (4.1.2 (c)) | 1 |
Rear fog lamp tell-tale missing (4.9.1 (a) (ii)) | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect Possibly due to product on the lens (4.1.2 (c)) | 1 |
Offside Rear Seat belt buckle missing (7.1.2 (d)) | 1 |
Offside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii)) | 1 |
Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii)) | 1 |
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Rear Body panel corroded and likely to cause injury taped up (6.2.1 (a) (i)) | 1 |
Nearside Rear Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill corroded (5.3.6 (a) (i)) | 1 |
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill corroded (5.3.6 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger corroded (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger corroded (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill & inner wing wheel arch corroded (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing wheel arch corroded (5.3.6 (a) (i)) | 1 |
Nearside Rear Body panel corroded and likely to cause injury outer wheel arch corroded ragged edge (6.2.1 (a) (i)) | 1 |
Offside Rear Body panel corroded and likely to cause injury outer wheel arch corroded ragged edge (6.2.1 (a) (i)) | 1 |
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Speedometer clearly inoperative (7.8 (b) (ii)) | 1 |
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
Offside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill panel (6.1.1 (c) (i)) | 1 |
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced mid sill panel (6.1.1 (c) (i)) | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel (5.3.6 (a) (i)) | 1 |
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill panel (6.1.1 (c) (i)) | 1 |
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced mid sill panel (6.1.1 (c) (i)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel (5.3.6 (a) (i)) | 1 |
Track rod end ball joint dust cover missing Both (2.1.3 (g) (ii)) | 1 |
Offside Front Seat belt damaged Fraying (7.1.2 (b) (i)) | 1 |
Exhaust has a major leak of exhaust gases Central exhaust box flexy (6.1.2 (a)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Suspension arm prescribed area outer sill corroded (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Suspension arm prescribed area outer sill corroded (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Suspension arm prescribed area outer wheel arch corroded (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Suspension arm prescribed area outer wheel arch corroded (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Suspension arm prescribed area inner sill corroded (5.3.6 (a) (i)) | 1 |
Offside Rear fog lamp light intensity significantly reduced (4.5.4 (a)) | 1 |
Nearside Headlamp has a product on the light source so that the light output is severely reduced dip beam (4.1.4 (b)) | 1 |
Offside Headlamp has a product on the lens so that the light output is severely reduced dip beam (4.1.4 (b)) | 1 |
Nearside Headlamp aim not tested lamp does not stay illuminated (4.1.2 (b)) | 1 |
Offside Headlamp aim not tested lamp does not stay illuminated (4.1.2 (b)) | 1 |
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch / sill area (7.1.1 (a) (i)) | 1 |
Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii)) | 1 |
Nearside Front Drivers view of an obligatory external mirror significantly affected by an obstruction (3.1 (a) (ii)) | 1 |
Nearside Rear Brake pipe leaking on an air braking system (1.1.11 (b) (i)) | 1 |
Emissions not tested due to coolant leak (8.2.1.2 (d)) | 1 |
Offside Front Anti-roll bar linkage ball joint excessively worn + dust cover split (5.3.4 (a) (i)) | 1 |
Central Rear Exhaust has a major leak of exhaust gases joint (6.1.2 (a)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Towing bracket. (6.1.1 (c) (i)) | 1 |
Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
Headlamp aim projected beam image is obviously incorrect BOTH SIDES (4.1.2 (c)) | 1 |
Seat belt missing rear seat belt stalks missing (7.1.2 (a)) | 1 |
Exhaust has a major leak of exhaust gases rear section (6.1.2 (a)) | 1 |
Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability Excessive play both D bushes (5.3.3 (a) (ii)) | 1 |
Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner seal . (5.3.6 (a) (i)) | 1 |
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i)) | 1 |
Headlamp aim projected beam image is obviously incorrect fronts (4.1.2 (c)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i)) | 1 |
Nearside Rear Inner Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Offside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Offside Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
Lower Steering column universal joint has excessive wear or play (2.2.2 (c)) | 1 |
Nearside Rear Road wheel fractured (5.2.2 (a)) | 1 |
Emissions not tested overheating due to water leak (8.2.1.2 (d)) | 1 |
Hazard warning switch inoperative (4.4.2 (a) (ii)) | 1 |
Rear Exhaust has a major leak of exhaust gases Flexi pipe (6.1.2 (a)) | 1 |
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced next to sliding door (7.1.1 (a) (i)) | 1 |
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced behind bumper (7.1.1 (a) (i)) | 1 |
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting behind bumper (6.1.6 (i) (i)) | 1 |
Central Exhaust has a major leak of exhaust gases flexi (6.1.2 (a)) | 1 |
Front passenger door cannot be opened from inside the vehicle (6.2.3 (a)) | 1 |
Offside Front Obligatory mirror insecure (3.3 (b) (ii)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Jacking point (5.3.6 (a) (i)) | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i)) | 1 |
Rear fog lamp not working OFFSIDE (4.5.1 (a) (ii)) | 1 |
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BOTH REAR INNER SILLS (5.3.6 (a) (i)) | 1 |
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BOHT FRONT OUTER-RIGGERS (5.3.6 (a) (i)) | 1 |
Stop lamp(s) not working OFFSIDE (4.3.1 (a) (ii)) | 1 |
Emissions not tested oil leak (8.2.1.2 (d)) | 1 |
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of arch (6.1.1 (c) (i)) | 1 |
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced corner panel behind bumper (6.1.1 (c) (i)) | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 1 |
Central Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength front crossmember holed on the bottom most of the way across (5.3.6 (a) (i)) | 1 |
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
Rear Rear fog lamp not working Bulb connection cleaned to rectify (4.5.1 (a) (ii)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, marked with chalk (5.3.6 (a) (i)) | 1 |
Rear Exhaust has a major leak of exhaust gases flexy (6.1.2 (a)) | 1 |
Position lamp not working fronts (4.2.1 (a) (ii)) | 1 |
Exhaust silencer insecure rear (8.1.1 (b) (i)) | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired SILL (6.2.2 (d) (ii)) | 1 |
Offside Front Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired SILL (6.2.2 (d) (ii)) | 1 |
Offside Rear Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired SILL (6.2.2 (d) (ii)) | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn D-BUSH (5.3.4 (a) (i)) | 1 |
Offside Rear Anti-roll bar pin or bush excessively worn D-BUSH (5.3.4 (a) (i)) | 1 |
Nearside Headlamp aim not tested (4.1.2 (b)) | 1 |
Emissions not tested Due to exhaust leak (8.2.1.2 (d)) | 1 |
Exhaust has a major leak of exhaust gases Tail section (6.1.2 (a)) | 1 |
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door step area (6.1.1 (c) (i)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
Offside Rear Inner Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 1 |
Nearside Front Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a)) | 1 |
Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i)) | 1 |
Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Rear valance (6.2.2 (d) (i)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
Front Headlamp light source and lamp not compatible hid head lights fitted (4.1.4 (c)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 1 |
Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Nearside Front Seat belt not functioning as intended (7.1.2 (c)) | 1 |
Offside Front Seat belt buckle not functioning as intended (7.1.2 (d)) | 1 |
Rear Passengers seat backrest cannot be secured in the upright position. bench seat (6.2.6 (a) (i)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Rear Panhard rod severely distorted |2.4.G.1| | 1 |
Offside Rear Outer Body panel corroded and likely to cause injury WHEEL ARCH. (6.2.1 (a) (i)) | 1 |
Central Rear Exhaust has a major leak of exhaust gases FLEXI PIPE. (6.1.2 (a)) | 1 |
Emissions not tested DUE TO MAJOR EXHAUST LEAK. (8.2.2.2 (e)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near front within 30cm of subframe mount (6.2.2 (d) (i)) | 1 |
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |