MOT History from tests of g MAZDA BONGOs year 2000

Review the list of common MAZDA BONGO failures below or to perform a specific mot history check on your MAZDA then use our popular KnowYourCar service

mot history

Pass percent:22.22%

(The average a g MAZDA BONGO year 2000 passes without issue)

Based on:9 MOT Tests

Most common failures	No# failures
Registration plate lamp issues	4
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Offside Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Exhaust has a major leak of exhaust gases gasket at tail to rear section \|7.1.2\|	1
Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))	1
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt insecure (5.3.4 (b) (ii))	1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	1
Headlamps matched pair are not the same colour o/s blue, n/s white \|1.7.6\|	1
Nearside Headlamp aim beam image obviously incorrect bulb loose \|1.8.A.1b\|	1
Horn not working \|1.6.2a\|	1
Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Centre Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Exhaust system insecure exhaust tail pipe \|6.1.2 \|a\|\|	1
Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt \|2.1.3 \|g\| \|ii\|\|	1
Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt \|2.1.3 \|g\| \|ii\|\|	1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced \|7.1.1 \|a\| \|i\|\|	1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced \|7.1.1 \|a\| \|i\|\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate lamp issues	4
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Offside Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Exhaust has a major leak of exhaust gases gasket at tail to rear section \|7.1.2\|	1
Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))	1
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt insecure (5.3.4 (b) (ii))	1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	1
Headlamps matched pair are not the same colour o/s blue, n/s white \|1.7.6\|	1
Nearside Headlamp aim beam image obviously incorrect bulb loose \|1.8.A.1b\|	1
Horn not working \|1.6.2a\|	1
Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Centre Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Exhaust system insecure exhaust tail pipe \|6.1.2 \|a\|\|	1
Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt \|2.1.3 \|g\| \|ii\|\|	1
Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt \|2.1.3 \|g\| \|ii\|\|	1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced \|7.1.1 \|a\| \|i\|\|	1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced \|7.1.1 \|a\| \|i\|\|	1

MOT History from tests of g MAZDA BONGOs year 2000

Find us on Facebook