| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 6 |
| Service brake: efficiency below requirements |3.7.B.7| | 4 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 4 |
| Headlamp aim out of alignment | 4 |
| Registration plate lamp issues | 3 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 3 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 2 |
| Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Rear fog lamp not working |1.3.2b| | 2 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 2 |
| Offside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Brake hose damaged | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Nearside Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Hydraulic fluid leaking excessively from steering rack (8.4.1 (a) (i)) | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Offside Rear Anti-roll bar linkage insecure broken |2.4.G.1| | 1 |
| Anti-lock braking system warning lamp indicates an ABS fault | 1 |
| Offside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Front Direction indicator insecure |1.4.A.2b| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to floor |6.1.B.2| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure broken |2.4.G.1| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
| Nearside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Power steering component leaking steering rack (2.1.5 (a)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting missing d bush missing (5.3.3 (a) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Rear Anti-roll bar pin or bush excessively worn D bushes |5.3.4 |a| |i|| | 1 |
| Power steering component leaking rack |2.1.5 |a|| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits |8.2.1.2 |c|| | 1 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn D bushes (5.3.4 (a) (i)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Registration plate issues | 1 |
| Fuel cap/sealing device missing LPG cap |7.2.4a| | 1 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Offside Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits |8.2.1.2 |a|| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Brakes imbalanced across an axle | 1 |