Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 3 |
Registration plate lamp issues | 3 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
Nearside Front Anti-roll bar linkage insecure |2.4.G.1| | 2 |
Registration plate issues | 2 |
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Bonnet cannot be secured in the closed position |8.4.1| | 1 |
Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near tow bar mounting |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill at rear |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner of sill front |6.1.B.2| | 1 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front cross member/radiator security |6.1.B.2| | 1 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear Anti-roll bar insecure |2.4.G.1| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement bush missing |2.4.G.2| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced wiring fault causing dim light output |1.7.5a| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch end of sill |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch end of sill |6.1.B.2| | 1 |
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Rear of sill |6.1.B.2| | 1 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Middle of sill |6.1.B.2| | 1 |
Other passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Headlamp aim out of alignment | 1 |
Rear Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 1 |
Nearside Rear Body component corroded and likely to cause injury wheel arch |6.2.1 |a| |i|| | 1 |
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Offside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Track rod end ball joint dust cover missing |2.2.C.1c| | 1 |