>

MOT History from tests of petrol MAZDA B2000s year 1993

Review the list of common MAZDA B2000 failures below or to perform a specific mot history check on your MAZDA then use our popular KnowYourCar service

mot history
Pass percent:32.26%
(The average a petrol MAZDA B2000 year 1993 passes without issue)
Based on:31 MOT Tests
Most common failuresNo# failures
Rear brake application uneven9
Brake pipe excessively corroded8
Headlamp aim out of alignment7
Offside Rear fog lamp not working |1.3.2b|6
Registration plate lamp issues5
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|4
Windscreen wiper does not clear the windscreen effectively4
Nearside Stop lamp not working |1.2.1b|3
Registration plate issues3
Exhaust has a major leak of exhaust gases |7.1.2|3
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|2
Nearside Headlamp not working on dipped beam |1.7.5a|2
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1|2
Offside Stop lamp not working |1.2.1b|2
Emissions not tested |7.0|2
Mechanical brake component has restricted free movement2
Centre Exhaust has a major leak of exhaust gases |7.1.2|2
Brakes imbalanced across an axle2
Offside Front front brake juddering severely |3.7.A.2b|2
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Brake pedal anti-slip provision missing |3.3.A.1b|2
Nearside Front front brake juddering severely |3.7.A.2b|2
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Rear position lamp|s| incomplete |1.1.4a|1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Offside Rear Rear fog lamp missing |1.3.2a|1
Nearside Rear Direction indicator incomplete |1.5.A1b|1
Offside Rear Leaf spring cracked |2.4.B.1a|1
Offside Seat belt has a cut which has significantly weakened the webbing |5.2.2a|1
Nearside Side repeater not working |1.4.A.2c|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Body has a sharp edge caused by corrosion |6.1.C.1|1
Headlamp not working on main beam |1.7.5a|1
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1|1
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Rear Leaf spring linkage pin excessively loose in its bracket |2.4.B.3a|1
Offside Front Front wheel bearing has excessive play |2.5.A.3c|1
Nearside Front wheel bearing has excessive play |2.5.A.3c|1
Nearside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a|1
Rear Exhaust has a part missing |7.1.1a|1
Fuel tank leaking |7.2.3|1
Rear fog lamp tell tale not working |1.3.1b|1
Rear Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d|1
Nearside Front Headlamp not working on dipped beam |1.7.5a|1
Nearside Front Windscreen wiper blade deteriorated |8.2.2|1
Offside Rear fog lamp insecure |1.3.2a|1
rear brakes release unevenly |3.7.B.4|1
Nearside Front Emissions not tested |7.0|1
Centre Exhaust system not adequately supported |7.1.1|1
Brake pedal has insufficient reserve movement |3.3.A.5|1
Offside Rear Brake pipe excessively damaged |3.6.B.2c|1
Offside Rear fog lamp missing |1.3.2a|1
Nearside Headlamp not working on main beam |1.7.5a|1
Nearside Front position lamp|s| not working |1.1.A.3b|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Rear fog lamp missing |1.3.2a|1
Nearside Front Direction indicator insecure |1.4.A.2b|1
Nearside Rear Body has a sharp edge caused by damage |6.1.C.1|1
Nearside Rear Rear position lamp|s| incorrect colour |1.1.A.3e|1
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1|1
Rear brake binding1
Nearside Ball joint dust cover missing |2.2.C.1c|1
Offside Ball joint dust cover missing |2.2.C.1c|1
Nearside Front Ball joint has excessive play |2.2.B.1f|1
Offside Front Body has a sharp edge caused by damage |6.1.C.1|1
Nearside Front Lower Suspension arm ball joint dust cover missing |2.4.G.2|1
Offside Front Upper Suspension arm ball joint dust cover missing |2.4.G.2|1
Offside Front Lower Suspension arm ball joint dust cover missing |2.4.G.2|1
Nearside Headlamp insecure |1.7.3|1
Nearside Ball joint has excessive play |2.2.B.1f|1
Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2|1
Nearside rear brake recording little or no effort |3.7.B.5a|1
Offside rear brake grabbing severely |3.7.A.5b|1
Nearside Front Headlamp does not operate immediately when selected on dipped beam |1.7.4a|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Upper Suspension arm ball joint dust cover missing |2.4.G.2|1
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a|1
Nearside Front An item not tested |Manual|1
Offside Headlamp not working on dipped beam |1.7.5a|1
Offside Headlamp not working on main beam |1.7.5a|1
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|1
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Rear position lamp|s| incorrect colour |1.1.A.3e|1
Nearside Front Headlamp insecure |1.7.3|1
Nearside Front Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy