>

MOT History from tests of petrol MAZDA B2000s year 1986

Review the list of common MAZDA B2000 failures below or to perform a specific mot history check on your MAZDA then use our popular KnowYourCar service

mot history
Pass percent:42.11%
(The average a petrol MAZDA B2000 year 1986 passes without issue)
Based on:38 MOT Tests
Most common failuresNo# failures
Offside Rear fog lamp not working |1.3.2b|8
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|7
Registration plate lamp issues6
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|5
Headlamp aim out of alignment4
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|4
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|4
Rear Exhaust has a major leak of exhaust gases |7.1.2|3
Front Exhaust has a major leak of exhaust gases |7.1.2|3
Registration plate issues2
Nearside Headlamp not working on dipped beam |1.7.5a|2
Rear Exhaust has a part missing |7.1.1a|2
Brake pipe excessively corroded2
Nearside Headlamp not working on main beam |1.7.5a|2
Rear brake application uneven2
rear brakes release unevenly |3.7.B.4|2
Headlamp switch faulty |1.7.1|1
Rear fog lamp not working |1.3.2b|1
Offside Headlamp not working on main beam |1.7.5a|1
Nearside Front Windscreen wiper blade deteriorated |8.2.2|1
Offside Front Windscreen wiper blade deteriorated |8.2.2|1
Offside Front Front position lamp|s| not in good working order |function impaired| |1.1.4a|1
Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a|1
Offside Front Lower Suspension has inadequate clearance with the bump stop |2.4.A.1a|1
Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Offside Windscreen wiper blade deteriorated |8.2.2|1
Body has a projection caused by damage |6.1.C.1|1
Fuel system component insecure |7.2.1|1
Rear fog lamp tell tale not working |1.3.1b|1
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Exhaust has a major leak of exhaust gases |7.1.2|1
Exhaust has part of the system excessively deteriorated |7.1.1a|1
Emissions not tested |7.0|1
Fuel cap/sealing device sealing washer missing |7.2.4c|1
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1|1
Offside Rear Body has a sharp edge caused by damage |6.1.C.1|1
Offside Front brake disc excessively pitted |3.5.1h|1
Brakes imbalanced across an axle1
Rear Rear fog lamp not working |1.3.2b|1
Nearside Front Front position lamp|s| not working |1.1.A.3b|1
Offside Rear Rear reflector excessively damaged so that its function is impaired |1.5.1c|1
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2|1
Exhaust emissions hydrocarbon content excessive |7.3.B.1b|1
Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a|1
Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f|1
Nearside Rear position lamp|s| incomplete |1.1.4a|1
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a|1
Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2|1
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1|1
Nearside Front Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1|1
Nearside rear brake grabbing severely |3.7.A.5b|1
Offside rear brake grabbing severely |3.7.A.5b|1
Offside Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a|1
Centre Exhaust has a major leak of exhaust gases |7.1.2|1
Front Body has a sharp edge caused by corrosion |6.1.C.1|1
Offside Rear Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy