Most common failures | No# failures |
---|
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Headlamp aim out of alignment | 7 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 6 |
Brakes imbalanced across an axle | 6 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Brake pipe excessively corroded | 5 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
Offside Steering rack gaiter split |2.2.D.2d| | 4 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 3 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Steering rack gaiter split |2.2.D.2d| | 2 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Front brake disc excessively pitted |3.5.1h| | 2 |
Nearside Front Direction indicator not working |1.4.A.2c| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Rear parking brake recording little or no effort | 2 |
Registration plate lamp issues | 2 |
Brake pedal spongy |3.3.B.1b| | 2 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
Front brake application uneven | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Rear Fuel system component insecure |7.2.1| | 1 |
Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Fuel tank leaking |7.2.3| | 1 |
Offside Anti-roll bar linkage insecure |2.4.G.1| | 1 |
Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
An item not tested |Manual| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Direction indicators not working |1.4.A.2c| | 1 |
Offside Front Side repeater not working |1.4.A.2c| | 1 |
Nearside Front Steering rack gaiter insecure |2.2.D.2d| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front brake disc excessively scored |3.5.1h| | 1 |
Offside Front brake disc excessively scored |3.5.1h| | 1 |
Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Windscreen wiper blade deteriorated |8.2.2| | 1 |
Windscreen wiper blade insecure | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 1 |
Offside Rear Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear brake application uneven | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |