Most common failures | No# failures |
---|
Brake pipe excessively corroded | 83 |
Headlamp aim out of alignment | 53 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 53 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 52 |
Brake hose excessively deteriorated | 48 |
Rear parking brake recording little or no effort | 47 |
Parking brake: efficiency below requirements |3.7.B.7| | 46 |
Windscreen wiper does not clear the windscreen effectively | 46 |
Offside Steering rack gaiter split |2.2.D.2d| | 44 |
Registration plate lamp issues | 39 |
Rear brake binding | 35 |
Service brake: efficiency below requirements |3.7.B.7| | 33 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 32 |
Nearside Steering rack gaiter split |2.2.D.2d| | 29 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 27 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 26 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 25 |
Offside rear brake recording little or no effort |3.7.B.5a| | 24 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 23 |
Brakes imbalanced across an axle | 23 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 20 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 20 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 16 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 16 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 16 |
Registration plate issues | 15 |
Exhaust has a major leak of exhaust gases |7.1.2| | 15 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 14 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 14 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 13 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 13 |
Parking brake lever has no reserve travel |3.1.6b| | 13 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 12 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 11 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 11 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 9 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
Offside Stop lamp not working |1.2.1b| | 9 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 9 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 8 |
Rear brake application uneven | 8 |
Offside Front position lamp|s| not working |1.1.A.3b| | 8 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 8 |
Offside Rear fog lamp not working |1.3.2b| | 8 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 7 |
Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 7 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 7 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 7 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 7 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 6 |
Nearside Side repeater not working |1.4.A.2c| | 6 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 6 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 6 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 5 |
Nearside Stop lamp not working |1.2.1b| | 5 |
Nearside Front Side repeater not working |1.4.A.2c| | 5 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 5 |
Nearside Rear coil spring fractured |2.4.C.1a| | 5 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Rear Rear fog lamp not working |1.3.2b| | 4 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Front Direction indicator not working |1.4.A.2c| | 4 |
Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 4 |
Windscreen has damage | 4 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Rear fog lamp tell tale not working |1.3.1b| | 4 |
rear brakes release unevenly |3.7.B.4| | 4 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 4 |
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Rear Mechanical brake component has restricted free movement | 4 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Brake hose damaged | 3 |
Offside Rear coil spring incomplete |2.4.C.1a| | 3 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 3 |
Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 3 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 3 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 3 |
Offside Front front brake binding |3.7.B.1| | 3 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 3 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 3 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside front brake binding |3.7.B.1| | 3 |
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside front brake binding |3.7.B.1| | 3 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 3 |
Offside Rear Stop lamp not working |1.2.1b| | 3 |
Offside Side repeater not working |1.4.A.2c| | 3 |
Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 2 |
Offside Front Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 2 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
Nearside Rear Coil spring not correctly located |2.4.C.2| | 2 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 2 |
Offside Front Side repeater not working |1.4.A.2c| | 2 |
Centre Exhaust system not adequately supported |7.1.1| | 2 |
Offside Rear Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 2 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Offside Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Obligatory mirror missing |8.1.1| | 2 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 2 |
Windscreen wiper blade insecure | 2 |
Offside Rear coil spring fractured |2.4.C.1a| | 2 |
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Fuel tank leaking |7.2.3| | 2 |
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
Headlamp switch faulty |1.7.1| | 2 |
Offside Front Brake hose bulging under pressure |3.6.B.3| | 2 |
Emissions not tested |7.0| | 2 |
Exhaust engine idle speed too high |7.3.A.2a| | 2 |
Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front brake disc excessively pitted |3.5.1h| | 2 |
Nearside Rear Stop lamp not working |1.2.1b| | 2 |
Nearside Rear Anti-roll bar linkage fractured |2.4.G.1| | 2 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Front brake application uneven | 2 |
Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Brake lever has restricted free movement |3.5.1k| | 2 |
Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 2 |
Fuel system component insecure |7.2.1| | 2 |
Nearside Front front brake binding |3.7.B.1| | 2 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 2 |
Offside Front coil spring incomplete |2.4.C.1a| | 2 |
Nearside Front Shock absorber has negligible damping effect |2.7.5| | 2 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Centre Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 2 |
Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Steering rack gaiter split |2.2.D.2d| | 2 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |