>

MOT History from tests of petrol MAZDA 2000s year 2000

Review the list of common MAZDA 2000 failures below or to perform a specific mot history check on your MAZDA then use our popular KnowYourCar service

mot history
Pass percent:67.35%
(The average a petrol MAZDA 2000 year 2000 passes without issue)
Based on:49 MOT Tests
Most common failuresNo# failures
Brake pipe excessively corroded4
Windscreen wiper does not clear the windscreen effectively3
Headlamp aim out of alignment2
Rear fog lamp not working |1.3.2b|2
Rear parking brake recording little or no effort1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Parking brake: efficiency below requirements |3.7.B.7|1
Offside Rear Stop lamp not working |1.2.1b|1
Nearside Rear Fuel pipe leaking |7.2.3|1
Offside Rear rear brake recording little or no effort |3.7.B.5a|1
Rear fog lamp does not emit a steady red light (4.5.4 (a))1
Nearside Headlamp lens seriously defective no image. (4.1.1 (b) (ii))1
Offside Headlamp lens seriously defective no image. (4.1.1 (b) (ii))1
Rear Rear fog lamp not working |1.3.2b|1
Front Rear fog lamp tell tale missing |1.3.1b|1
Nearside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a|1
Offside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a|1
Offside Rear Rear fog lamp emits a light other than red |1.3.2e|1
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3|1
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4|1
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Rear fog lamp missing |4.5.1 |a| |ii||1
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b||1
Nearside rear brake excessively fluctuating |3.7.B.3|1
Parking brake lever has no reserve travel |3.1.6b|1
Central Exhaust has a major leak of exhaust gases |7.1.2|1
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3|1
Registration plate issues1
Nearside Front Headlamp insecure |1.7.3|1
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Exhaust has a major leak of exhaust gases |7.1.2|1
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))1
Rear fog lamp not working (4.5.1 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis out rigger (5.3.6 (a) (i))1
Offside Inner Rear position lamp|s| not working |1.1.A.3b|1
Offside Rear position lamp|s| not working |1.1.A.3b|1
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i||1
Nearside Rear Inner Position lamp not working |4.2.1 |a||1
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||1
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy