Most common failures | No# failures |
---|
Rear Brake lever has inadequate reserve travel |3.1.3b| | 11 |
Headlamp aim out of alignment | 8 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 8 |
Exhaust is leaking and excessively noisey |7.1.1b| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Registration plate issues | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Position lamp switch insecure |1.1.4b| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Brake cable knotted |3.2.A1b| | 1 |
Offside Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Nearside Front Brake lever insecure |3.1.2a| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Position lamp not working |4.2.1 |a|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Upper Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Upper Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Brake cable excessively corroded |3.2.A1b| | 1 |
Rear Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Horn not working |1.7.3a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Registration plate lamp issues | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Central Front Shock absorber has a serious fluid leak both fork seals leaking. (5.3.2 (b)) | 1 |
Central Rear Position lamp adversely affected by the operation of another lamp Brake lamp showing all the time. (4.2.3 (b)) | 1 |
Offside Rear Footrest insecure footrest upside down and partly corroded off. (6.2.12 (a)) | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |