Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Direction indicators not working |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Central Front Headlamp light intensity severely reduced Battery voltage so low as to impede all lighting |4.1.4 |a|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock |2.1.4 |a|| | 1 |
Centre Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Offside Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded brake binding |3.2.A1h| | 1 |
Front Direction indicators not working both front indicators missing |1.5.1c| | 1 |
Rear Direction indicators flashing more than 120 times per minute both rear |1.5.1c| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Registration plate issues | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Horn not working |1.7.3a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Rear Brake disc significantly and obviously worn badley scorred (1.1.14 (a) (i)) | 1 |
Offside Stop lamp not working hand brake lever (4.3.1 (a) (ii)) | 1 |
Front Steering operation restricted in free movement from lock to lock this motor scooter steering head bearings are very tight and dangeoros |2.1.4 |c|| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear position lamp obscured more than 50% |1.1.1d| | 1 |