Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen BOTH |4.1.2 |a|| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Exhaust has a major leak of exhaust gases leaking and corroded (6.1.2 (a)) | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Front mudguard insecure |2.3.7| | 1 |
Offside Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Central Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Offside Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Direction indicator insecure |1.5.3b| | 1 |
Nearside Front position lamp damaged and function impaired |1.1.1b| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Shock absorber has a serious fluid leak Front fork seals (both) (5.3.2 (b)) | 1 |
Motorcycle structure joining/attachment plate or fastening insecure Grab rail loose (6.1.1 (b) (i)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |