MOT History from tests of petrol LINCOLN CONTINENTALs year 1995

Review the list of common LINCOLN CONTINENTAL failures below or to perform a specific mot history check on your LINCOLN then use our popular KnowYourCar service

mot history

Pass percent:47.62%

(The average a petrol LINCOLN CONTINENTAL year 1995 passes without issue)

Based on:21 MOT Tests

Most common failures	No# failures
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits \|7.3.D.3\|	2
Windscreen wiper does not clear the windscreen effectively	2
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Nearside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Nearside Front Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Rear Rear fog lamp not working \|1.3.2b\|	1
Nearside Headlamp excessively damaged so that the light output is severely reduced \|1.7.5a\|	1
Offside Headlamp excessively damaged so that the light output is severely reduced \|1.7.5a\|	1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Exhaust system not adequately supported \|7.1.1\|	1
Offside Front Upper Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Rear fog lamp not working \|1.3.2b\|	1
Nearside Front Hydraulic brake cylinder leaking hydraulic fluid Brake caliper bleed nipple area (1.1.16 (b) (i))	1
Front Exhaust has a major leak of exhaust gases around catalytic converter \|7.1.2\|	1
Offside Front Shock absorber has a serious fluid leak \|2.7.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Anti-lock braking system component excessively damaged \|3.4.2\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Anti-roll bar linkage has excessive play in a ball joint \|2.4.G.2\|	1
Exhaust emissions carbon monoxide content at idle excessive \|7.3.D.4\|	1
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Rear Direction indicator incorrect colour \|1.4.A.2f\|	1
Front brake disc excessively scored \|3.5.1h\|	1
Rear brake disc excessively pitted \|3.5.1h\|	1
Nearside Front Headlamp not in a clean condition affecting beam image \|1.2.4a\|	1
Exhaust emissions carbon monoxide content after 2nd fast idle excessive \|7.3.D.3\|	1
Horn not working \|1.6.2a\|	1
Offside Rear Service brake indicates brake bind \|3.7.D.2a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits \|7.3.D.3\|	2
Windscreen wiper does not clear the windscreen effectively	2
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Nearside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Nearside Front Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Rear Rear fog lamp not working \|1.3.2b\|	1
Nearside Headlamp excessively damaged so that the light output is severely reduced \|1.7.5a\|	1
Offside Headlamp excessively damaged so that the light output is severely reduced \|1.7.5a\|	1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Exhaust system not adequately supported \|7.1.1\|	1
Offside Front Upper Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Rear fog lamp not working \|1.3.2b\|	1
Nearside Front Hydraulic brake cylinder leaking hydraulic fluid Brake caliper bleed nipple area (1.1.16 (b) (i))	1
Front Exhaust has a major leak of exhaust gases around catalytic converter \|7.1.2\|	1
Offside Front Shock absorber has a serious fluid leak \|2.7.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Anti-lock braking system component excessively damaged \|3.4.2\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Anti-roll bar linkage has excessive play in a ball joint \|2.4.G.2\|	1
Exhaust emissions carbon monoxide content at idle excessive \|7.3.D.4\|	1
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Rear Direction indicator incorrect colour \|1.4.A.2f\|	1
Front brake disc excessively scored \|3.5.1h\|	1
Rear brake disc excessively pitted \|3.5.1h\|	1
Nearside Front Headlamp not in a clean condition affecting beam image \|1.2.4a\|	1
Exhaust emissions carbon monoxide content after 2nd fast idle excessive \|7.3.D.3\|	1
Horn not working \|1.6.2a\|	1
Offside Rear Service brake indicates brake bind \|3.7.D.2a\|	1

MOT History from tests of petrol LINCOLN CONTINENTALs year 1995

Find us on Facebook