Most common failures | No# failures |
---|
Headlamp aim out of alignment | 41 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 22 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 20 |
Rear reflector on motorcycle missing |1.4.1| | 15 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 13 |
Horn not working |1.7.3a| | 13 |
Registration plate issues | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Steering headbearing has excessive free play |2.2.2| | 11 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Drive chain excessively loose |6.2.1d| | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 10 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 10 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Horn not loud enough to be heard by another road user |1.7.3a| | 7 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
Drive chain worn to excess |6.2.1e| | 6 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 6 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 5 |
Registration plate lamp issues | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Riders seat insecure |6.2.1a| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Offside Rear Footrest missing |6.2.1a| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Indicator switch defective |1.5.4| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 3 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 3 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
Exhaust excessively deteriorated |7.1.1a| | 3 |
Stop lamp remains on when the brakes are released | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
Handlebar deformed |2.1.1b| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Headlamp aim not tested |1.6| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Direction indicators not working |1.5.1c| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Offside Rear Brake locking device missing |3.2.A1e| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Direction indicators not working |1.5.1c| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Direction indicators not working all |1.5.1c| | 2 |
Rear Brake lever mounting insecure |3.1.2a| | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Headlamp aim headlamp damaged and function impaired beam |1.2.3a| | 1 |
Headlamp at least one does not illuminate on dipped beam does not come straight on |1.2.2a|i|| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel pipe union leaking |7.2.1a| | 1 |
Offside Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear suspension bush has excessive free play Swinging arm bush |2.4.A2a|i|| | 1 |
Nearside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Wheel has loose rivet/s or bolts |5.2.2 |e| |i|| | 1 |
Offside Front Throttle operating incorrectly Throttle Housing Loose on handle bar and moves with throttle |6.2.1f| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Direction indicator damaged and function impaired right hand front |1.5.3a| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Headlamp aim headlamp damaged and function impaired has no beam patten on dip |1.2.3a| | 1 |
Central Rear reflector on motorcycle missing |1.4.1| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear sprocket bolts |6.2.1h| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear Brake reaction bracket insecure split pin missing |3.2.A1j| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Inner Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Brake lever cannot be applied smoothly Front brake can not be applied smootly |3.1.3d| | 1 |
Steering linkage has excessive free play Head stock bearings have excessive free play |2.2.2| | 1 |
Nearside Front shock absorber seal failed and leaking oil Left hand fork seal leaking badly |2.3.3| | 1 |
Rear Rear shock absorber has inadequate damping effect. Rear shock absorbers have inadequate damping |2.4.A.3b| | 1 |
Fairings insecure and likely to impede the steering Body panel insecure |2.1.2e| | 1 |
Rear Brake lever attachment screws loose |3.1.2b| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected increases rpm lock to lock |6.2.7 |a| |ii|| | 1 |
Centre Footrest insecure |6.2.1a| | 1 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Steering headbearing has excessive free play |Need Replacing| |2.2.2| | 1 |
Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Suspension arm attachment bracket/mounting insecure trailing arm |5.3.3 |a| |i|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Brake grabbing severely |1.2.1 |c|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Steering linkage insecure to the extent there is excessive movement at the mountings |2.1.3 |a| |ii|| | 1 |
Motorcycle structure cracked rear trailing arm to engine |6.1.1a| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Suspension arm pin or bush excessively worn swinging arm bolt/nut loose |5.3.4 |a| |i|| | 1 |
Rear Brake pedal has insufficient reserve travel adjusted |1.1.2 |a|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Horn control defective |1.7.2a| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Nearside Brake lever mounting insecure |3.1.2a| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Brake performance not tested |3.3| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Chain guard fouling another component |6.2.1c| | 1 |
Front Brake disc contaminated with fork oil |1.1.14 |b|| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear suspension bush has excessive free play swingarm has free play |2.4.A2a|i|| | 1 |
Rear Rear suspension bush excessively deteriorated swing arm bushes |2.4.A2a|i|| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Direction indicators not working both sides |1.5.1c| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Front suspension assembly component excessively corroded. both |2.3.1| | 1 |
Brake lever mounting insecure |3.1.2a| | 1 |
Rear Lower Rear suspension bush has excessive free play causing rear wheel steer and affecting alignment |2.4.A2a|i|| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Nearside Front Front position lamp damaged and function impaired Position light bulb fitted and connections repaired |1.1.1b| | 1 |
Indicator switch inoperative rh winkers do not stay on |4.4.2 |a| |ii|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Wheel spoke excessively loose |4.2.1b| | 1 |
Built up wheel has a bolt/s missing |4.2.1c| | 1 |
Nearside Front Indicator switch insecure |1.5.4| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Throttle operating incorrectly throttle sticks |6.2.1f| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Nearside Indicator tell tale not functioning |1.5.2| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Rear Brake component has an inadequate repair |3.1.5| | 1 |
Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Drive chain sprocket worn to excess front and rear |6.2.1e| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Horn not working |1.7.3a| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Brake lever excessively damaged return spring |3.2.A1c| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Fuel cap ineffective sealing washer cracked |6.1.3 |b| |i|| | 1 |
Exhaust has a major leak of exhaust gases front pipe |6.1.2 |a|| | 1 |
Stop lamp not working o/s lever not orperating stop lamp |4.3.1 |a| |ii|| | 1 |
Rear Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
Front Brake has no recorded effort at a wheel not working at all |1.2.1 |a| |ii|| | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Fuel cap ineffective sealing ring cracked |6.1.3 |b| |i|| | 1 |
Exhaust has a major leak of exhaust gases front pipe leaking |6.1.2 |a|| | 1 |
Roller brake test brake efficiency less than 27.5% overall |1.2.2 |a| |ii|| | 1 |
Nearside Front Direction indicator damaged and function impaired holed and showing white light |1.5.3a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on with headlights turned on |1.1.3a| | 1 |
Brake lever has inadequate reserve travel rear arm over centre |3.1.3b| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Brake lever insecure |1.1.2 |e| |i|| | 1 |
Rear Floor brake test indicates a binding brake adjustment |3.3.C2c| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking engine mounts deteriorated |6.1.1c| | 1 |
Brake lever has inadequate reserve travel arm over centre no reserve adjustment |3.1.3b| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front Horn control not functioning. |1.7.2b| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Front Brake hose stretched by steering movement |3.2.B3b| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Offside Front Lower Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Rear Direction indicator with a multiple light source more than 1/2 not functioning |4.4.1 |a| |ii|| | 1 |
Front Motorcycle structure joining/attachment plate or fastening insecure front clocks insecure |6.1.1 |b| |i|| | 1 |
Offside Front Motorcycle structure joining/attachment plate or fastening insecure controls insecure |6.1.1 |b| |i|| | 1 |
Offside Front Position lamp not working side light |4.2.1 |a|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Rear Brake grabbing severely |1.2.1 |c|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Riders seat insecure seat doesn`t latch closed |6.2.1a| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
All direction indicators incorrect colour |4.4.3 |a|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front Wheel spoke excessively loose |5.2.2 |d|| | 1 |
Offside Front Shock absorber has a serious fluid leak fork oil seal |5.3.2 |b|| | 1 |
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
Motorcycle structure joining/attachment plate or fastening insecure air box/carburetor insecure mounting bolt missing |6.1.1 |b| |i|| | 1 |
Steering headbearing in such a condition that steering control is adversely affected notchy |2.2.2 |f| |ii|| | 1 |
Nearside Rear All direction indicators obviously incorrectly positioned section 4.4.3 |4.4.3 |a|| | 1 |
Offside Rear All direction indicators obviously incorrectly positioned |4.4.3 |a|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
Rear Rear suspension movement is excessively stiff no movement |2.4.A.3b| | 1 |
Exhaust mounting does not fully support the exhaust system centre mount not secure |7.1.1.c| | 1 |
Central Engine mounting/bracket damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Rear Upper Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Headlamp not working on dipped beam but this position knocks out the front and rear position lamps. (4.1.1 (a) (ii)) | 1 |
All position lamps not working when dip switch selected. front and rear (4.2.1 (a)) | 1 |
Central Front Upper Horn not working (7.7 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
All direction indicators incorrect colour (4.4.3 (a)) | 1 |
Brake master cylinder defective but brake still operating sight window cracking (1.1.10 (b) (i)) | 1 |
Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Front Brake hose bulging under pressure (1.1.12 (d)) | 1 |
Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Brake lagging in operation (1.2.1 (d)) | 1 |
Nearside Rear Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Motorcycle structure joining/attachment plate or fastening insecure (6.1.1 (b) (i)) | 1 |
Front All direction indicators obviously incorrectly positioned (4.4.3 (a)) | 1 |
Steering headbearing excessively stiff or notchy Notchy (2.2.2 (f) (i)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Suspension arm pin or bush excessively worn swing arm bush (5.3.4 (a) (i)) | 1 |
Nearside Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
Direction indicator obviously incorrectly positioned rear indicators too close to centre line of vehicle (4.4.3 (a)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Handlebar mounting insecure mounting rubbers loose (2.2.1 (a) (i)) | 1 |
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Horn not working (7.7 (a)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |