>

MOT History from tests of petrol LEXMOTO ZSBs year 2016

Review the list of common LEXMOTO ZSB failures below or to perform a specific mot history check on your LEXMOTO then use our popular KnowYourCar service

mot history
Pass percent:58.25%
(The average a petrol LEXMOTO ZSB year 2016 passes without issue)
Based on:970 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment74
Registration plate lamp issues51
Rear reflector missing (4.8.2 (a) (ii))40
Rear Stop lamp not working (4.3.1 (a) (ii))38
Drive chain excessively loose (6.1.7 (c) (i))27
Headlamp not working on dipped beam (4.1.1 (a) (ii))22
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))19
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))17
Front Position lamp not working (4.2.1 (a))15
Horn not working (7.7 (a))13
Front Stop lamp not working (4.3.1 (a) (ii))12
Headlamp not working on main beam (4.1.1 (a) (ii))11
Nearside Front Direction indicator not working (4.4.1 (a) (ii))10
Horn not working (7.7 (a) (ii))10
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))10
Headlamp not working on dipped beam |4.1.1 |a| |ii||9
Nearside Rear Footrest missing (6.2.12 (a))9
Offside Rear Footrest missing (6.2.12 (a))9
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))9
Horn not working |7.7 |a| |ii||9
Rear reflector missing |4.8.2 |a| |ii||9
Rear Stop lamp not working |4.3.1 |a| |ii||8
Wheel alignment incorrect which adversely affects the handling (2.4 (a))8
Rear Rear reflector missing (4.8.2 (a) (ii))8
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))8
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))7
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))7
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))7
Stop lamp remains on when the brakes are released7
Wheel alignment incorrect which adversely affects the steering (2.4 (a))7
Drive chain worn to excess (6.1.7 (c) (i))7
Offside Front Direction indicator not working (4.4.1 (a) (ii))6
Drive chain excessively tight (6.1.7 (k) (i))6
Offside Rear Direction indicator not working (4.4.1 (a) (ii))6
Headlamp aim not tested (4.1.2 (b))5
Drive chain so loose it is likely to fail (6.1.7 (c) (ii))5
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))5
Headlamp insecure (4.1.1 (c))5
Rear Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii))5
Rear Brake excessively binding (1.2.1 (f))5
Front Shock absorber has negligible damping effect (5.3.2 (b))5
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))5
Drive chain so worn it is likely to fail (6.1.7 (c) (ii))4
Nearside Front Footrest insecure (6.2.12 (a))4
Rear Position lamp not working (4.2.1 (a))4
Front Wheel bearing has excessive play (5.1.3 (a) (i))4
Rear Footrest missing (6.2.12 (a))4
Front Stop lamp not working |4.3.1 |a| |ii||4
Stop lamp not working |4.3.1 |a| |ii||4
All direction indicators not working (4.4.1 (a) (ii))4
Rear Wheel bearing has excessive play (5.1.3 (a) (i))4
Front Brake lever has insufficient reserve travel (1.1.2 (a))3
Brake pedal has insufficient reserve travel (1.1.2 (a))3
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))3
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))3
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))3
Central Rear Rear reflector missing (4.8.2 (a) (ii))3
Drive chain excessively loose |6.1.7 |c| |i||3
Rear Brake pedal pivot has excessive free play (1.1.1 (b))3
Front Position lamp not working |4.2.1 |a||3
Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii))3
Throttle operating incorrectly (6.2.7 (a) (i))3
Rear Shock absorber has negligible damping effect (5.3.2 (b))3
Handlebar excessively deformed (2.2.1 (c) (i))3
Front Wheel bearing rough when rotated (5.1.3 (b) (i))3
Offside Front Footrest insecure (6.2.12 (a))3
Stop lamp not working (4.3.1 (a) (ii))3
Drive chain worn to excess |6.1.7 |c| |i||3
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))3
Headlamp not working on main beam |4.1.1 |a| |ii||2
Throttle operating incorrectly |6.2.7 |a| |i||2
Rear Rear reflector missing |4.8.2 |a| |ii||2
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))2
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i))2
Front Brake effort inadequate at a wheel (1.2.1 (a) (i))2
Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii))2
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))2
Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii))2
Rear Drive chain excessively loose (6.1.7 (c) (i))2
Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Exhaust has a major leak of exhaust gases (6.1.2 (a))2
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||2
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii))2
Nearside Front Direction indicator incorrect colour (4.4.3 (a))2
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii))2
Rear Brake component modification unsafe (1.1.21 (d) (i))2
Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))2
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))2
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||2
Front Horn not working (7.7 (a) (ii))2
Headlamp aim unable to be tested (4.1.2 (b))2
Handlebar mounting insecure (2.2.1 (a) (i))2
Brake pedal has insufficient reserve travel |1.1.2 |a||2
Rear Wheel spindle loose (5.2.1 (c) (i))2
Exhaust system insecure (6.1.2 (a))2
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))2
Nearside Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c))2
Front Front wheel bearings are excessively rough |2.3.5b|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))2
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Offside Front Direction indicator not working |4.4.1 |a| |ii||2
Fuel cap leaking (6.1.3 (b) (i))2
Drive chain sprocket excessively loose (6.1.7 (c) (i))2
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))2
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))2
Nearside Rear Footrest insecure (6.2.12 (a))2
Front Brake disc contaminated (1.1.14 (b))2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy