Most common failures | No# failures |
---|
Headlamp aim out of alignment | 41 |
Registration plate lamp issues | 24 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Drive chain excessively loose |6.2.1d| | 14 |
Registration plate issues | 11 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 11 |
Front Valve stem seriously damaged (5.2.3 (j)) | 11 |
Rear Brake excessively binding (1.2.1 (f)) | 11 |
Drive chain worn to excess |6.2.1e| | 11 |
Drive chain excessively loose (6.1.7 (c) (i)) | 11 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 9 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 8 |
Stop lamp remains on when the brakes are released | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 8 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 8 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Throttle operating incorrectly |6.2.1f| | 7 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 7 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 7 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 7 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 7 |
Stop lamp remains on when the brake is released |1.3.1e| | 7 |
Horn not working |1.7.3a| | 7 |
Rear Brake excessively binding |1.2.1 |f|| | 7 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 6 |
Front Brake excessively binding (1.2.1 (f)) | 6 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 6 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 5 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Drive chain excessively tight |6.2.1d| | 5 |
Rear Position lamp not working (4.2.1 (a)) | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Nearside Rear Footrest missing (6.2.12 (a)) | 4 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Rear Position lamp not working |4.2.1 |a|| | 4 |
Horn not working (7.7 (a) (ii)) | 4 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 4 |
Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 3 |
Nearside Rear Footrest missing |6.2.12 |a|| | 3 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 3 |
Rear position lamp incorrect colour |1.1.2b| | 3 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Drive chain sprocket worn to excess |6.2.1e| | 3 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 3 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 3 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 3 |
Offside Front Direction indicators not working |1.5.1c| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Horn not working |7.7 |a| |ii|| | 3 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 3 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 3 |
Front Valve stem seriously damaged |5.2.3 |j|| | 3 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a| | 2 |
Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 2 |
Drive chain excessively tight (6.1.7 (k) (i)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Indicator switch insecure |1.5.4| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Nearside Handlebar deformed |2.1.1b| | 2 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
Offside Rear Footrest missing (6.2.12 (a)) | 2 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 2 |
Headlamp insecure (4.1.1 (c)) | 2 |
Front Stop lamp emits other than a steady red light |1.3.1b| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 2 |
Riders seat insecure |6.2.5 |a| |ii|| | 2 |
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 2 |
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 2 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 2 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 2 |
Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 2 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking r/h switch insecure and could jam front brake lever travel |6.1.1c| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 2 |
All direction indicators not working |4.4.1 |a| |ii|| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Drive chain worn to excess |6.1.7 |c| |i|| | 2 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 2 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Headlamp reflector missing |4.1.1 |b| |ii|| | 1 |
Front Brake fluid contaminated |1.8 |a|| | 1 |
Front Brake indicates excessive fluctuation of brake effort warped disc |1.2.1 |e|| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Fork yoke deformed top yoke out of line |2.1.1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Front Handlebar deformed out of line |2.1.1b| | 1 |
Offside All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Stop lamp switch with a delay in operation Rear brake pedal (4.3.2 (a) (ii)) | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Nearside Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front Horn is not continous or uniform |1.7.3c| | 1 |
Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Brake lever has restricted free movement |1.1.15 |e|| | 1 |
Central Front Horn not working (7.7 (a) (ii)) | 1 |
Offside Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Upper Direction indicator not working |1.5.1c| | 1 |
Central Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Footrest insecure mounting bolts loose (6.2.12 (a)) | 1 |
Pillion seat with a defective supporting structure bolts missing from cowling (6.2.6 (a) (i)) | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Fuel cap ineffective |6.1.3 |b| |i|| | 1 |
Nearside Position lamp switch insecure |4.2.2 |b|| | 1 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Rear Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |
Nearside Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain adjustment nuts loose |6.2.1h| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Rear Brake hose leaking (1.1.12 (c)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Brake grabbing severely (1.2.1 (c)) | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake pedal |1.3.1a| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded calliper pistons not releasing |3.2.A1h| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Wheel alignment incorrect which adversely affects the handling fork leg yokes not aligned |2.5.1| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts not secure |3.2.B2c| | 1 |
Offside Position lamp switch insecure (4.2.2 (b)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Central Rear Lower Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Brake component worn and seriously reduced in strength rubber boot missing from rear caliper.
lots of movement in caliper |3.2.A1| | 1 |
Rear position lamp does not illuminate immediately when it is switched on Number plate. |1.1.3a| | 1 |
Rear shock absorber has inadequate damping effect. damping has failed just works on the coil spring |2.4.A.3b| | 1 |
Rear Drive chain sprocket excessively loose |6.1.7 |c| |i|| | 1 |
Offside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Direction indicator not working all (4.4.1 (a) (ii)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
Front Brake caliper inadequately mounted locking tabs not secure (1.1.16 (c) (i)) | 1 |
Seat insecure |6.2.1a| | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Throttle operating incorrectly insecure on handle bar |6.2.1f| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Central Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Valve stem seriously damaged |5.2.3 |j|| | 1 |
Brake performance not tested |1.2.1 |g|| | 1 |
Rear reflector defective or damaged by more than 50% of the reflecting surface faded (4.8.1 (a) (ii)) | 1 |
Exhaust has a major leak of exhaust gases exhaust deteriorated (6.1.2 (a)) | 1 |
Fork yoke insecure centre nut loose (2.2.2 (d) (i)) | 1 |
Brake hose excessively deteriorated | 1 |
Central Rear Shock absorber has negligible damping effect lost its damping |5.3.2 |b|| | 1 |
Central Front Steering headbearing in such a condition that steering control is adversely affected bearings notchey |2.2.2 |f| |ii|| | 1 |
Offside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Rear Upper Brake hose leaking (1.1.12 (c)) | 1 |
Rear Lower Brake component insecure (1.1.21 (c)) | 1 |
Stop lamp not working With rear brake. (4.3.1 (a) (ii)) | 1 |
Offside Position lamp switch insecure handlebar switch loose.r h. |1.1.4b| | 1 |
Rear position lamp incorrect colour needs new bulb. |1.1.2b| | 1 |
Handlebar grip insecure to handlebar throttle switch control insecure |2.2.1 |d| |ii|| | 1 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Brake disc contaminated (1.1.14 (b)) | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear Brake locking device insecure brake adjustment rod |3.2.A1e| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain split link |6.2.1h| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Footrest missing |6.2.12 |a|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Suspension arm pin or bush excessively worn swinging arm (5.3.4 (a) (i)) | 1 |
Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Offside Rear Suspension arm pin or bush excessively worn swing arm bush |5.3.4 |a| |i|| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Position lamp switch insecure (4.2.2 (b)) | 1 |
Headlamp aim headlamp deteriorated and function impaired up-rated bulbs fitted providing no pattern |1.2.3a| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied operation impeded as is fouling throttle assembly |3.1.3c| | 1 |
Nearside Front Direction indicators not working insecure and does not face front |1.5.1c| | 1 |
Offside Rear Direction indicators not working insecure and does not face rear |1.5.1c| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Brake caliper leaking |1.1.16 |b| |i|| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded Front brake lever fouling |3.2.A1h| | 1 |
Front Brake lever insecure Front brake lever has to much free travel. |3.1.2a| | 1 |
Clutch lever positioned so it cannot be readily operated. Clutch cable frayed. |6.2.1g| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock Throttle control loose. |2.1.4| | 1 |
Stop lamp does not illuminate immediately a brake applies rear foot brake |1.3.1a| | 1 |
Rear Roller brake test indicates a binding brake calliper seized |3.3.A1a| | 1 |
Rear suspension bearing has excessive free play swinging arm bearings - ? fastener loose |2.4.A2a|i|| | 1 |
Handlebar handgrip not secure to handlebars. check twistgrip assembly locating pin |2.1.1c| | 1 |
Nearside Front Direction indicator not working And broken on its fixing (4.4.1 (a) (ii)) | 1 |
Exhaust has a major leak of exhaust gases broken on down pipe centre section (6.1.2 (a)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Suspension component mounting modified so the suspension is inoperative travel restricted contacting spot light mount. (5.3.3 (c) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Handlebar mounting clamp loose throttle mount |2.1.1a| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Rear Suspension component pin or bush excessively worn Swingarm side movement (5.3.4 (a) (i)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Brake hose fouling on exhaust |3.2.B3b| | 1 |
Rear Brake hose fouling on brake disc |3.2.B3b| | 1 |
Brake hose damaged | 1 |
Offside Steering lock stop ineffective handle bar fouling tank |2.1.3| | 1 |
Nearside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Offside Steering operation impeded by a fairing (2.1.4 (e)) | 1 |
Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock wiring harness (2.1.4 (a)) | 1 |
Offside Front Brake caliper insecurely mounted and braking performance affected locking tabs (1.1.16 (c) (ii)) | 1 |
Throttle operating incorrectly turning steering lock to lock (6.2.7 (a) (i)) | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies Front and rear switches inoperative |1.3.1a| | 1 |
Direction indicators not working Front right indicator inoperative |1.5.1c| | 1 |
Roller brake test indicates a sticking brake Rear brake |3.3.A1a| | 1 |
Rear shock absorber has inadequate damping effect. No damping on rear shock absorber |2.4.A.3b| | 1 |
Brake fluid reservoir fluid level dangerously low Front |3.2.B1d| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Spring clip on joining link incorrectly fitted |6.2.1h| | 1 |
Headlamp switch insecure L/h switch insecure |1.2.4| | 1 |
Clutch lever positioned so it cannot be readily operated insecure (6.2.7 (b)) | 1 |
Stop lamp does not illuminate immediately a brake applies front and rear brakes inoperative |1.3.1a| | 1 |
Direction indicators not working front right hand indicator |1.5.1c| | 1 |
Roller brake test indicates a binding brake rear brake |3.3.A1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride drive chain link clip back to front. |6.2.1h| | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Nearside Handlebar mounting clamp loose (2.1.1a) | 1 |
Stop lamp not working front or rear brake (4.3.1 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected insecure/fouling bodywork on full lock (6.2.7 (a) (ii)) | 1 |
Stop lamp not working on front lever operation (4.3.1 (a) (ii)) | 1 |
Rear Brake lever has restricted free movement fouling on rear swing arm (1.1.15 (e)) | 1 |
Steering operation impeded by a fairing on left hand lock (2.1.4 (e)) | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Brake indicates excessive fluctuation of brake effort 20kgf fluctuation |1.2.1 |e|| | 1 |
Steering headbearing in such a condition that steering control is adversely affected bearings tight and notchy |2.2.2 |f| |ii|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake control |1.3.1a| | 1 |
Drive chain sprocket excessively loose |6.1.7 |c| |i|| | 1 |
Drive chain sprocket so loose it is likely to fail INSECURE, BOLE SHEARED OFF |6.1.7 |c| |ii|| | 1 |
Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Rear Brake disc significantly and obviously worn Badly warped (1.1.14 (a) (i)) | 1 |
Indicator switch defective |1.5.4| | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls Back brake (4.3.2 (a) (iii)) | 1 |
Brake effort inadequate at a wheel Front brake lever catching on throttle cable, adjusted lever to clear |1.2.1 |a| |i|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Clutch lever shortened so it cannot be readily operated |6.2.7 |b|| | 1 |
Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front Steering operation impeded by a fairing |2.1.4 |e|| | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Throttle operating incorrectly Throttle housing loose on the handlebars (6.2.7 (a) (i)) | 1 |
Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Handlebar excessively deformed (2.2.1 (c) (i)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Stop lamp adversely affected by the operation of another lamp both sides (indicators flash red) (4.3.3 (b)) | 1 |
Brake pedal attachment screws loose |3.1.2b| | 1 |
Offside Handlebar retaining device loose |2.2.1 |b| |i|| | 1 |
Stop lamp not working from rear brake (4.3.1 (a) (ii)) | 1 |
Steering headbearing excessively stiff or notchy steering stiff (2.2.2 (f) (i)) | 1 |
Front Steering movement excessively stiff with the wheel raised right hand lock |2.2.1b| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Rear Lower Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Motorcycle structure is so deformed it is likely to adversely affect braking or steering (6.1.1 (a) (ii)) | 1 |
Front Brake lever excessively damaged |3.2.A1c| | 1 |
Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Brake component insecure |1.1.21 |c|| | 1 |
Drive chain excessively tight, so that it is likely to fail |6.1.7 |k| |ii|| | 1 |
Rear mono-shock pivot seized |2.4.B.4| | 1 |
Nearside Front Direction indicators not working indicator missing |1.5.1c| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Rear suspension bearing excessively deteriorated swing arm |2.4A.2a|i|| | 1 |
Front Stop lamp does not illuminate immediately a brake applies swich |1.3.1a| | 1 |
Front Handlebar handgrip not secure to handlebars. both |2.1.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear suspension bush has excessive free play swing arm |2.4.A2a|i|| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
Nearside Front Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
Fuel cap leaking |6.1.3 |b| |i|| | 1 |
Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Nearside Rear Drive chain sprocket so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies stoplight does not work from operation of rear brake pedal, |1.3.1a| | 1 |
Brake cylinder severely damaged front brake master cylinder glass is cracked/deteriorated. could cause fluid to leak |3.2.B1b| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Drive chain sprocket worn to excess both front and rear sprockets worn |6.2.1e| | 1 |
Offside Rear Brake hose excessively twisted (1.1.12 (b) (ii)) | 1 |
Front Wheel excessively distorted |5.2.2 |c| |i|| | 1 |
Front Brake caliper inadequately mounted Lock Tab |1.1.16 |c| |i|| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Throttle operating incorrectly housing loose |6.2.1f| | 1 |
Front Brake caliper inadequately mounted |1.1.16 |c| |i|| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Drive chain horseshoe locking device incorrectly fitted Missing |6.1.7 |j| |i|| | 1 |
Rear Drive chain sprocket so loose it is likely to fail Bolt loose |6.1.7 |c| |ii|| | 1 |
Front Brake caliper leaking and braking performance affected |1.1.16 |b| |ii|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle housing loose and spinning on handlebar |6.2.7 |a| |ii|| | 1 |
Wheel alignment incorrect which adversely affects the handling Off to the right |2.4 |a|| | 1 |
Rear Brake component inadequately mounted Caliper mounting bracket incorrectly fitted |1.1.21 |c|| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies Adjusted rear switch position. |1.3.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Nearside Rear Upper Brake component insecure lock tab insecure (1.1.21 (c)) | 1 |
Steering lock stop maladjusted Handle bars trapping fingers on tank |2.1.3| | 1 |
Rear Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Front Upper Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Position lamp switch insecure (4.2.2 (b)) | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Stop lamp does not illuminate immediately a brake applies replace switch |1.3.1a| | 1 |
Rear Suspension arm modified so the suspension is likely to fail other components fouling exhaust (5.3.3 (c) (ii)) | 1 |
Rear Brake back plate|s| securing bolt|s| loose locking tabs not bent over properly |3.2.A1j| | 1 |
Front Brake lever has inadequate reserve travel fouling switch gear |3.1.3b| | 1 |
Rear Footrest missing both |6.2.12 |a|| | 1 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Rear Footrest insecure |6.2.12 |a|| | 1 |
Offside Front Footrest insecure |6.2.12 |a|| | 1 |
Stop lamp not working on rear brake application |4.3.1 |a| |ii|| | 1 |
Stop lamp showing white light to the rear |4.3.3 |a| |ii|| | 1 |
Rear Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Nearside Handlebar grip missing (2.2.1 (d) (i)) | 1 |
Offside Handlebar grip missing (2.2.1 (d) (i)) | 1 |
Offside Footrest insecure (6.2.12 (a)) | 1 |
Chain guard insecure missing (6.1.7 (i)) | 1 |
Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Rear Stop lamp likely to become detached (4.3.1 (c) (ii)) | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking exhaust fowling swinging arm etc |6.1.1c| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Stop lamp not working Control brake two (4.3.1 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Clutch lever bent so it cannot be readily operated (6.2.7 (b)) | 1 |
Brake hose damaged and likely to fail rubbing on disc (1.1.12 (a)) | 1 |
Handlebar deformed |2.1.1b| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front Direction indicator light intensity significantly reduced |4.4.3 |a|| | 1 |
Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
Rear Brake caliper has no reserve travel and braking performance affected (1.1.16 (e) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Front Front suspension assembly component excessively corroded. fork legs |2.3.1| | 1 |
Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Rear Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
Rear All position lamps not working (4.2.1 (a)) | 1 |
Rear Drive chain sprocket so worn it is likely to fail cush drive. (6.1.7 (c) (ii)) | 1 |
Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen incorrect beam pattern due to LED bulbs. (4.1.2 (a)) | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear suspension bush has excessive free play swingarm |2.4.A2a|i|| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Central Rear Wheel has loose rivet/s or bolts (5.2.2 (e) (i)) | 1 |
Offside Rear Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 1 |
Central Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Central Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Offside Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Valve stem seriously damaged Rear valve stem perished, Possible instant deflation |5.2.3 |j|| | 1 |
Front Brake disc insecure Front brake disc bolt missing / sheared off (1.1.14 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition Exhaust excessively noisy (8.1.1 (a)) | 1 |
Front Brake fluid reservoir severely corroded level sight glass corroded |3.2.B1b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride no locking tabs fitted to rear sprocket and one bolt is missing |6.2.1h| | 1 |
Offside Front Footrest insecure rubber split |6.2.1a| | 1 |
Offside Front Direction indicator missing |4.4.1 |a| |ii|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride clip fitted wrong direction |6.2.1h| | 1 |
Rear Suspension component has excessive wear or free play (5.3.3 (d)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Offside Front Brake master cylinder insecure (1.1.10 (c)) | 1 |
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Offside Handlebar deformed bar hitting tank |2.1.1b| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Drive chain sprocket worn to excess rear cush drive rrubbers (6.1.7 (c) (i)) | 1 |
Headlamp aim not tested lights too dim to test |4.1.2 |b|| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Nearside Steering linkage locking device ineffective |2.1.3 |d|| | 1 |
Steering operation restricted in free movement from lock to lock headbearings very tight |2.1.4 |c|| | 1 |