>

MOT History from tests of petrol LEXMOTO WYs year 2015

Review the list of common LEXMOTO WY failures below or to perform a specific mot history check on your LEXMOTO then use our popular KnowYourCar service

mot history
Pass percent:70.72%
(The average a petrol LEXMOTO WY year 2015 passes without issue)
Based on:806 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment27
Rear Brake lever has insufficient reserve travel (1.1.2 (a))18
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))18
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))17
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||14
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))13
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))11
Headlamp not working on dipped beam (4.1.1 (a) (ii))10
Rear Brake lever has insufficient reserve travel |1.1.2 |a||10
Exhaust has a major leak of exhaust gases (6.1.2 (a))7
Registration plate lamp issues7
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))7
Stop lamp remains on when the brakes are released7
Horn not working |7.7 |a| |ii||6
Rear reflector missing (4.8.2 (a) (ii))6
Front Shock absorber has a serious fluid leak (5.3.2 (b))6
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||5
Rear Brake lever has inadequate reserve travel |3.1.3b|5
Registration plate issues5
Horn not working (7.7 (a) (ii))5
Front Valve stem seriously damaged (5.2.3 (j))5
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii))5
Rear Shock absorber has negligible damping effect (5.3.2 (b))5
Front Stop lamp not working |4.3.1 |a| |ii||5
Rear reflector missing |4.8.2 |a| |ii||4
Position lamp showing white light to the rear (4.2.3 (a) (ii))4
Front Brake lever has insufficient reserve travel (1.1.2 (a))4
Headlamp not working on dipped beam |4.1.1 |a| |ii||4
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))4
Steering headbearing has excessive free play |2.2.2|4
Front Position lamp not working (4.2.1 (a))4
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||3
Rear Valve stem seriously damaged (5.2.3 (j))3
Front Wheel bearing rough when rotated (5.1.3 (b) (i))3
Rear Wheel bearing has excessive play (5.1.3 (a) (i))3
Horn not working (7.7 (a))3
Horn not working |1.7.3a|3
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a))3
Rear Shock absorber has a serious fluid leak |5.3.2 |b||3
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))3
Front Stop lamp not working (4.3.1 (a) (ii))3
Front Shock absorber has a serious fluid leak |5.3.2 |b||3
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))3
Rear Rear reflector missing (4.8.2 (a) (ii))3
Nearside Brake lever has insufficient reserve travel (1.1.2 (a))2
Nearside Brake lever has insufficient reserve travel |1.1.2 |a||2
Rear Brake excessively binding (1.2.1 (f))2
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front All position lamps not working |4.2.1 |a||2
Rear Shock absorber has a serious fluid leak (5.3.2 (b))2
Rear Stop lamp not working |4.3.1 |a| |ii||2
Brake lever has insufficient reserve travel (1.1.2 (a))2
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||2
Rear Shock absorber has negligible damping effect |5.3.2 |b||2
Headlamp not working on main beam (4.1.1 (a) (ii))2
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i||2
Exhaust is leaking and excessively noisey |7.1.1b|2
Headlamp aim not tested (4.1.2 (b))2
Rear Stop lamp not working (4.3.1 (a) (ii))2
Front Position lamp not working |4.2.1 |a||2
Front Brake grabbing severely (1.2.1 (c))2
Stop lamp not working |4.3.1 |a| |ii||2
Exhaust silencer insecure (8.1.1 (b) (i))2
Front Brake fluid not visible (1.1.10 (d) (iii))2
Front Wheel bearing has excessive play (5.1.3 (a) (i))2
Front Brake grabbing severely |1.2.1 |c||1
Shock absorber has negligible damping effect seized |5.3.2 |b||1
Rear Brake lagging in operation |1.2.1 |d||1
Brake disc contaminated (1.1.14 (b))1
Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Offside Rear Footrest missing (6.2.12 (a))1
Wheel alignment incorrect which adversely affects the steering |2.4 |a||1
Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))1
Stop lamp not working rear brake stop lamp (4.3.1 (a) (ii))1
All direction indicators not working all (4.4.1 (a) (ii))1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Offside Rear Direction indicator not working (4.4.1 (a) (ii))1
Nearside Front Position lamp not working (4.2.1 (a))1
Nearside Front Brake lever has insufficient reserve travel (1.1.2 (a))1
Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Exhaust silencer insecure Top Mounting bolt missing |8.1.1 |b| |i||1
Rear Motorcycle structure joining/attachment plate or fastening insecure grab rail/rack (6.1.1 (b) (i))1
Front Wheel alignment incorrect which adversely affects the steering (2.4 (a))1
Fuel hose leaking (6.1.3 (b) (i))1
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Offside Front Brake lever has insufficient reserve travel (1.1.2 (a))1
Shock absorber has a serious fluid leak L/H |5.3.2 |b||1
Shock absorber has negligible damping effect Rear |5.3.2 |b||1
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii))1
Offside Stop lamp not working brake switch |4.3.1 |a| |ii||1
Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i))1
Rear Shock absorber has an excessively worn bush (5.3.2 (c))1
Nearside Brake lever so insecure that the brake cannot be readily applied loose on handlebars. (1.1.2 (e) (ii))1
Nearside Brake lever is so short that the brake cannot be readily applied (1.1.2 (d))1
Fuel pipe so insecure there is a risk of fire pipe and filter hanging. (6.1.3 (a) (ii))1
Rear Position lamp not working stop lights staying on ,cant check rear light. (4.2.1 (a))1
Rear Suspension arm ball joint excessively worn swing arm come engine mount ,both. (5.3.4 (a) (i))1
Exhaust silencer likely to become detached (8.1.1 (b) (ii))1
Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d))1
Rear Road spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i))1
Nearside Direction indicator not working both |4.4.1 |a| |ii||1
Offside Direction indicator not working both |4.4.1 |a| |ii||1
Central Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii||1
Front Brake lever so insecure that the brake cannot be readily applied |1.1.2 |e| |ii||1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Front Shock absorber has a serious fluid leak forks leaking massively fork tubes massively scored (5.3.2 (b))1
Wheel alignment incorrect which adversely affects the handling |2.4 |a||1
Suspension arm damaged and seriously weakened |5.3.3 |b| |i||1
Front Shock absorber has a serious fluid leak Both fork seals leaking. (5.3.2 (b))1
Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii))1
Motorcycle structure is so deformed it is likely to adversely affect braking or steering (6.1.1 (a) (ii))1
Front Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii))1
Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii))1
Front Forks excessively deformed (2.2.2 (d) (i))1
Front Wheel bearing has excessive play |5.1.3 |a| |i||1
Front Wheel bearing rough when rotated |5.1.3 |b| |i||1
Rear Engine mounting/bracket damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i||1
Nearside Front Shock absorber has negligible damping effect |5.3.2 |b||1
Offside Front Shock absorber has negligible damping effect |5.3.2 |b||1
Position lamp showing white light to the rear |4.2.3 |a| |ii||1
Nearside Lower Motorcycle structure joining/attachment plate or fastening insecure |6.1.1 |b| |i||1
Nearside Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))1
Position lamp adversely affected by the operation of another lamp not working when main beam on (4.2.3 (b))1
Steering operation restricted in free movement from lock to lock sticking on R/H lock (2.1.4 (c))1
Nearside Brake lever has insufficient reserve travel rear brake (1.1.2 (a))1
Front Exhaust has a major leak of exhaust gases downpipe (6.1.2 (a))1
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii))1
Front suspension assembly excessive wear or free play in a front suspension component Head Bearings |2.3.4|1
Front shock absorber seal failed and leaking oil both |2.3.3|1
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1|1
Rear Brake lever cannot be released smoothly |3.1.3d|1
Stop lamp not working Off the front break leaver |4.3.1 |a| |ii||1
Rear Position lamp not working (4.2.1 (a))1
Stop lamp does not illuminate by the operation of both brake controls Machine been out of use Switch lubed (4.3.2 (a) (iii))1
Rear Brake pedal has insufficient reserve travel rear brake adjusted Customer advised brake is near maximum adjustment (1.1.2 (a))1
Front Shock absorber has a serious fluid leak Forks (5.3.2 (b))1
Front Shock absorber has negligible damping effect Forks (5.3.2 (b))1
Throttle operating incorrectly Tickover too high, pushing bike forward (6.2.7 (a) (i))1
Front Brake lever has insufficient reserve travel |1.1.2 |a||1
Rear Brake pivot has restricted free movement (1.1.15 (e))1
Fuel cap ineffective unable to test as seat will not lift up (6.1.3 (b) (i))1
Central Front Brake performance unable to be tested (1.2.1 (g))1
Position lamp not working All (4.2.1 (a))1
Direction indicator not working All (4.4.1 (a) (ii))1
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))1
Engine mounting/bracket bracket damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i||1
Nearside Front Upper Brake lever has inadequate reserve travel |3.1.3b|1
Rear Position lamp showing white light to the rear |4.2.3 |a| |ii||1
Stop lamp showing white light to the rear |4.3.3 |a| |ii||1
Rear position lamp incorrect colour white light to rear |1.1.2b|1
Nearside Front Direction indicator not working |4.4.1 |a| |ii||1
Nearside Front All direction indicators not working (4.4.1 (a) (ii))1
Offside Rear All direction indicators not working (4.4.1 (a) (ii))1
Central Front Horn not working (7.7 (a) (ii))1
Central Front Headlamp aim not tested (4.1.2 (b))1
Central Front All position lamps not working (4.2.1 (a))1
Central Rear All position lamps not working (4.2.1 (a))1
Central Front Upper Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Central Front Lower Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Front Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii||1
Offside Indicator tell tale not functioning |1.5.2|1
Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii||1
Nearside Brake lever has inadequate reserve travel |3.1.3b|1
Offside Stop lamp does not illuminate immediately a brake applies front brake stop light not working |1.3.1a|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Stop lamp emits other than a steady red light |1.3.1b|1
Front Stop lamp emits other than a steady red light (4.3.3 (a) (ii))1
Front Steering headbearing has excessive wear or free play headrace bearings had excessive free play in them,they have been adjusted (2.2.2 (f) (i))1
Riders seat insecure front hinge mount is broken on seat bucket (6.2.5 (a) (ii))1
Front Motorcycle structure joining/attachment plate or fastening insecure front panel has no fixings and is very likely to fall off (6.1.1 (b) (i))1
Steering headbearing has excessive wear or free play excessively loose (2.2.2 (f) (i))1
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))1
Front brake disc in such a condition that it is seriously weakened1
Front Brake effort inadequate at a wheel |1.2.1 |a| |i||1
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))1
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Stop lamp showing white light to the rear (4.3.3 (a) (ii))1
Front Shock absorber has a serious fluid leak fork seals leaking |5.3.2 |b||1
Front Valve stem seriously damaged |5.2.3 |j||1
Front Headlamp aim not tested (4.1.2 (b))1
Front Headlamp not working on main beam (4.1.1 (a) (ii))1
Stop lamp does not illuminate by the operation of both brake controls not working when rear brake applied (4.3.2 (a) (iii))1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Nearside Front Shock absorber has negligible damping effect (5.3.2 (b))1
Offside Front Shock absorber has negligible damping effect (5.3.2 (b))1
Stop lamp not working From n/s brake control (4.3.1 (a) (ii))1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))1
Throttle control functioning such that safe operation of the motorcycle is adversely affected tickover too high (6.2.7 (a) (ii))1
Front Motorcycle structure joining/attachment plate or fastening insecure mudguard (6.1.1 (b) (i))1
Forks excessively corroded |2.2.2 |d| |i||1
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))1
Rear Brake lagging in operation (1.2.1 (d))1
Offside Front Direction indicator not working (4.4.1 (a) (ii))1
Rear Wheel fixing missing |single fixing| |5.2.1 |a| |ii||1
Central Rear Lower Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
Stop lamp not working on front brake control (4.3.1 (a) (ii))1
Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Riders seat insecure (6.2.5 (a) (ii))1
Nearside Shock absorber has a serious fluid leak (5.3.2 (b))1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Wheel bearing has excessive play (5.1.3 (a) (i))1
Wheel bearing rough when rotated (5.1.3 (b) (i))1
Nearside Rear Shock absorber has a serious fluid leak |5.3.2 |b||1
Offside Front Shock absorber has negligible damping effect heavy oiling of for leg indicating failed seal/worn fork (5.3.2 (b))1
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Rear Wheel bearing rough when rotated (5.1.3 (b) (i))1
Stop lamp not working When using front brake control. (4.3.1 (a) (ii))1
Rear All position lamps not working |4.2.1 |a||1
Front Exhaust system insecure (6.1.2 (a))1
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Front Shock absorber has negligible damping effect (5.3.2 (b))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy