>

MOT History from tests of petrol LEXMOTO TORNADOs year 2013

Review the list of common LEXMOTO TORNADO failures below or to perform a specific mot history check on your LEXMOTO then use our popular KnowYourCar service

mot history
Pass percent:64.18%
(The average a petrol LEXMOTO TORNADO year 2013 passes without issue)
Based on:335 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment21
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||10
Steering headbearing has excessive free play |2.2.2|6
Exhaust is leaking and excessively noisey |7.1.1b|5
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||5
Brake hose excessively deteriorated4
Headlamp not working on dipped beam (4.1.1 (a) (ii))4
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))4
Exhaust has a major leak of exhaust gases |6.1.2 |a||4
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Nearside Brake lever has inadequate reserve travel |3.1.3b|3
Headlamp aim not tested (4.1.2 (b))3
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))3
Front Shock absorber has a serious fluid leak (5.3.2 (b))3
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))3
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||3
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Exhaust has a major leak of exhaust gases (6.1.2 (a))3
Offside Front shock absorber seal failed and leaking oil |2.3.3|3
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||3
Stop lamp remains on when the brakes are released3
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))3
Front Position lamp not working (4.2.1 (a))3
Rear Brake excessively binding (1.2.1 (f))3
Rear Brake lever has inadequate reserve travel |3.1.3b|3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|2
Rear Roller brake test indicates a severely juddering brake |3.3.A1b|2
Rear wheel bearings have excessive free play |2.4.A.2c|2
Front Brake disc|s| excessively worn |3.2.A1l|2
Fuel cap ineffective (6.1.3 (b) (i))2
Rear Wheel bearing has excessive play (5.1.3 (a) (i))2
Rear Brake lever has insufficient reserve travel |1.1.2 |a||2
Rear Shock absorber has negligible damping effect (5.3.2 (b))2
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Headlamp not working on main beam (4.1.1 (a) (ii))2
Front Valve stem seriously damaged (5.2.3 (j))2
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||2
Horn not working |1.7.3a|2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Nearside Front shock absorber seal failed and leaking oil |2.3.3|2
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||2
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||2
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front Brake excessively binding (1.2.1 (f))2
Rear Position lamp not working (4.2.1 (a))2
Headlamp not working on main beam |4.1.1 |a| |ii||2
Front Brake master cylinder defective but brake still operating (1.1.10 (b) (i))2
Stop lamp not working (4.3.1 (a) (ii))2
Rear Brake lever has insufficient reserve travel (1.1.2 (a))2
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1|1
Nearside Rear Direction indicator not working |1.5.1c|1
Offside Stop lamp does not illuminate immediately a brake applies brake lever |1.3.1a|1
Offside Brake lever has inadequate reserve travel |3.1.3b|1
Steering lock stop missing |2.1.3|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Nearside Rear suspension bush excessively deteriorated |2.4.A2a|i||1
Nearside Front Direction indicator incorrect colour white not yellow (4.4.3 (a))1
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))1
Horn not working |7.7 |a| |ii||1
Headlamp insecure (4.1.1 (c))1
Brake master cylinder leaking (1.1.10 (b) (ii))1
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))1
Central Rear Upper Fuel cap mounting flange/sealing method defective |7.2.2c|1
Shock absorber has negligible damping effect no damping on rear |5.3.2 |b||1
Front Brake disc contaminated |1.1.14 |b||1
Front Brake master cylinder defective but brake still operating |1.1.10 |b| |i||1
Fuel system component leaking (6.1.3 (b) (i))1
Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c))1
Stop lamp not working when applying front brake control (4.3.1 (a) (ii))1
Rear Brake grabbing severely (1.2.1 (c))1
Nearside Brake lever has insufficient reserve travel (1.1.2 (a))1
Headlamp light source and lamp not compatible Bulb not fitted correctly. (4.1.4 (c))1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort low effort |3.3.A1c|1
Central Front Upper Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Nearside Rear Shock absorber has a serious fluid leak |5.3.2 |b||1
Front position lamp damaged and function impaired |1.1.1b|1
Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii))1
Wheel alignment incorrect which adversely affects the steering (2.4 (a))1
Front All position lamps adversely affected by the operation of another lamp |1.1.3b|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Front Shock absorber has a serious fluid leak both |5.3.2 |b||1
Offside Front Forks excessively corroded |2.2.2 |d| |i||1
Offside Rear All direction indicators incorrect colour |4.4.3 |a||1
Nearside Rear All direction indicators incorrect colour |4.4.3 |a||1
Fuel cap ineffective |6.1.3 |b| |i||1
Front Horn not working (7.7 (a) (ii))1
Nearside Rear Motorcycle structure joining/attachment plate or fastening insecure airbox broken bolt (6.1.1 (b) (i))1
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|1
Stop lamp does not emit a steady light not working |1.3.1b|1
Brake lever has abnormal movement of levers indicating excessive wear or maladjustment rear brake (1.1.15 (f))1
Nearside Rear Direction indicators not working |1.5.1c|1
Front wheel bearings have excessive free play |2.3.5b|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Horn not working (7.7 (a) (ii))1
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))1
Offside Rear Exhaust system insecure exhaust mount/rear arm bolt missing (6.1.2 (a))1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))1
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))1
Front Brake hose damaged and likely to fail |1.1.12 |a||1
Stop lamp not working with front lever |4.3.1 |a| |ii||1
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii||1
Front Front wheel bearings have excessive free play |2.3.5b|1
Brake pipe excessively corroded1
Steering linkage has excessive free play |2.2.2|1
Offside Direction indicators not working |1.5.1c|1
Front Roller brake test indicates a sticking brake |3.3.A1a|1
Offside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride offside handlebar switch |6.2.1h|1
Front suspension assembly component excessively corroded. |2.3.1|1
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Fuel cap sealing washer deteriorated |7.2.2c|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Nearside Front Direction indicators not working |1.5.1c|1
Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Nearside Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Rear Stop lamp not working |4.3.1 |a| |ii||1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Fuel cap ineffective seal damaged |6.1.3 |b| |i||1
Stop lamp not working Front brake switch failure |4.3.1 |a| |ii||1
Stop lamp remains on when the brake is released |1.3.1e|1
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Stop lamp does not illuminate immediately a brake applies From front brake |1.3.1a|1
Stop lamp not working |4.3.1 |a| |ii||1
Steering headbearing excessively stiff or notchy Stiff (2.2.2 (f) (i))1
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))1
Headlamp light intensity severely reduced (4.1.4 (a))1
Riders seat insecure (6.2.5 (a) (ii))1
Front Brake lever has insufficient reserve travel (1.1.2 (a))1
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Front Wheel spindle loose |5.2.1 |c| |i||1
Front Valve stem seriously damaged |5.2.3 |j||1
Direction indicators flashing more than 120 times per minute all |1.5.1c|1
Rear suspension bush has excessive free play rear shock absorber top bush |2.4.A2a|i||1
Rear suspension bush has excessive free play engine/swinging arm excess play |2.4.A2a|i||1
Nearside Rear Direction indicator insecure |1.5.3b|1
Offside Rear Direction indicator insecure |1.5.3b|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Steering operation restricted in free movement from lock to lock (2.1.4 (c))1
Rear suspension bush has excessive free play nearside upper engine mounting |2.4.A2a|i||1
Front suspension has inadequate damping effect. |2.3.6c|1
Offside Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c|1
Front shock absorber seal failed and leaking oil both fork seals leaking |2.3.3|1
Headlamp incorrect colour deteriated |1.2.1|1
Brake master cylinder leaking Sight glass |1.1.10 |b| |ii||1
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a||1
Position lamp not working |4.2.1 |a||1
Shock absorber has negligible damping effect |5.3.2 |b||1
Brake fluid reservoir severely damaged Sight glass broke |3.2.B1b|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Nearside Front Front suspension has inadequate damping effect. |2.3.6c|1
Offside Front Front suspension has inadequate damping effect. |2.3.6c|1
Nearside Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Stop lamp does not illuminate immediately a brake applies front control |1.3.1a|1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Offside Front shock absorber seal failed and leaking oil fork seal |2.3.3|1
Headlamp aim beam image kick up to the offside |1.6|1
Front Steering headbearing has excessive free play |2.2.2|1
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c|1
Centre Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii||1
Rear Brake lever has inadequate reserve travel application |3.1.3b|1
Headlamp aim not tested |1.6|1
Headlamp insecure Body work damaged. (4.1.1 (c))1
Throttle operating incorrectly (6.2.7 (a) (i))1
Brake master cylinder leaking Sight glass (1.1.10 (b) (ii))1
Front Brake fluid not visible (1.1.10 (d) (iii))1
Wheel alignment incorrect which adversely affects the handling Forks misaligned (2.4 (a))1
Front Brake lever not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii||1
Rear Wheel fixing missing (single fixing) (5.2.1 (a) (ii))1
Offside Front Brake lever has inadequate reserve travel |3.1.3b|1
Offside Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e|1
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a||1
Rear Brake lever not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii||1
Front Fairings so located that it is likely to impede the steering |2.1.2e|1
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Exhaust excessively deteriorated |7.1.1a|1
Nearside Brake lever insecure |3.1.2a|1
Nearside Position lamp switch insecure |1.1.4b|1
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Front Headlamp aim not tested (4.1.2 (b))1
Headlamp aim so that beam "kick up" is not visible on the screen bulb in incorrectly |1.6.B.1|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Nearside Front mudguard insecure |2.3.7|1
Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii))1
Handlebar retaining device loose (2.2.1 (b) (i))1
Front Valve stem seriously damaged front and rear valves both damaged (5.2.3 (j))1
Front Headlamp aim not tested not tested insecure (4.1.2 (b))1
Front Headlamp insecure (4.1.1 (c))1
Rear Shock absorber has negligible damping effect |5.3.2 |b||1
Brake hose damaged1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy