>

MOT History from tests of petrol LEXMOTO GLADIATORs year 2014

Review the list of common LEXMOTO GLADIATOR failures below or to perform a specific mot history check on your LEXMOTO then use our popular KnowYourCar service

mot history
Pass percent:61.08%
(The average a petrol LEXMOTO GLADIATOR year 2014 passes without issue)
Based on:889 MOT Tests
Most common failuresNo# failures
Registration plate lamp issues35
Headlamp aim out of alignment30
Rear Brake lever has inadequate reserve travel |3.1.3b|16
Rear Brake lever has insufficient reserve travel (1.1.2 (a))15
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))14
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))11
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))11
Nearside Front shock absorber seal failed and leaking oil |2.3.3|10
Steering headbearing has excessive free play |2.2.2|10
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|10
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))10
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||9
Rear reflector missing (4.8.2 (a) (ii))9
Offside Front shock absorber seal failed and leaking oil |2.3.3|8
Rear reflector on motorcycle missing |1.4.1|8
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|8
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||8
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||8
Rear Brake lever has insufficient reserve travel |1.1.2 |a||8
Front Shock absorber has a serious fluid leak (5.3.2 (b))8
Headlamp not working on dipped beam (4.1.1 (a) (ii))8
Brake hose damaged7
Front Brake lever has inadequate reserve travel |3.1.3b|7
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Rear reflector on motorcycle obscured |1.4.2b|7
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|6
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|6
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||6
Horn not working (7.7 (a) (ii))6
Registration plate issues5
Steering movement excessively `notchy` with the wheel raised |2.2.1b|5
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||5
Front position lamp does not illuminate immediately when switched on |1.1.3a|5
Front Shock absorber has a serious fluid leak |5.3.2 |b||5
Nearside Rear Shock absorber has a serious fluid leak |5.3.2 |b||5
Stop lamp remains on when the brakes are released5
Front Stop lamp not working (4.3.1 (a) (ii))5
Rear Shock absorber has negligible damping effect (5.3.2 (b))5
Exhaust has a major leak of exhaust gases (6.1.2 (a))5
Headlamp not working on main beam (4.1.1 (a) (ii))5
Rear Rear reflector on motorcycle missing |1.4.1|4
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||4
Rear reflector missing |4.8.2 |a| |ii||4
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||4
Offside Rear Shock absorber has a serious fluid leak |5.3.2 |b||4
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|4
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))4
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))4
Rear Stop lamp not working (4.3.1 (a) (ii))4
Front Brake excessively binding (1.2.1 (f))4
Front Valve stem seriously damaged (5.2.3 (j))4
Headlamp aim not tested (4.1.2 (b))4
Horn not working |1.7.3a|3
Rear Roller brake test indicates a binding brake |3.3.A1a|3
Steering movement excessively stiff with the wheel raised |2.2.1b|3
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|3
Headlamp not working on dipped beam |4.1.1 |a| |ii||3
Horn not working |7.7 |a| |ii||3
Front Brake lever has insufficient reserve travel |1.1.2 |a||3
Brake hose excessively deteriorated3
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a||3
Nearside Front Brake lever has inadequate reserve travel |3.1.3b|3
Front shock absorber seal failed and leaking oil |2.3.3|3
Exhaust has a major leak of exhaust gases |6.1.2 |a||3
Front Shock absorber has negligible damping effect |5.3.2 |b||3
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii||3
Front Valve stem seriously damaged |5.2.3 |j||3
Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i||3
Rear Rear reflector missing |4.8.2 |a| |ii||3
Nearside Front Position lamp not working (4.2.1 (a))3
Brake performance not tested (1.2.1 (g))3
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))3
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))3
Front Wheel bearing rough when rotated (5.1.3 (b) (i))3
All direction indicators not working (4.4.1 (a) (ii))3
Rear Brake excessively binding (1.2.1 (f))3
Rear Valve stem seriously damaged (5.2.3 (j))3
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b))3
Front Shock absorber has negligible damping effect (5.3.2 (b))3
Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b))3
Offside Rear Shock absorber has negligible damping effect (5.3.2 (b))3
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i||2
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c|2
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c|2
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Front Roller brake test indicates a binding brake |3.3.A1a|2
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|2
Headlamp aim not tested |1.6|2
Rear wheel bearings have excessive free play |2.4.A.2c|2
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|2
Horn control not functioning. |1.7.2b|2
Nearside Brake lever has inadequate reserve travel |3.1.3b|2
Front Wheel bearing has excessive play |5.1.3 |a| |i||2
Handlebar mounting clamp loose |2.1.1a|2
Rear Wheel has an excessively distorted bead rim. |4.2.2|2
Riders seat insecure |6.2.1a|2
Front Stop lamp not working |4.3.1 |a| |ii||2
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii||2
Stop lamp remains on when the brake is released |1.3.1e|2
Rear shock absorber seal failed and leaking oil |2.4.A.1c|2
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||2
Offside Rear Direction indicator not working |4.4.1 |a| |ii||2
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||2
Front Wheel bearing rough when rotated |5.1.3 |b| |i||2
Riders seat insecure |6.2.5 |a| |ii||2
Stop lamp not working |4.3.1 |a| |ii||2
Headlamp aim beam image kick up to the offside |1.6|2
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|2
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Exhaust system insecure |6.1.2 |a||2
Rear Shock absorber has negligible damping effect |5.3.2 |b||2
Front wheel bearings are excessively rough |2.3.5b|2
Rear Valve stem seriously damaged |5.2.3 |j||2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Offside Rear Direction indicators not working |1.5.1c|2
Rear Shock absorber has a serious fluid leak |5.3.2 |b||2
Offside Front Position lamp not working (4.2.1 (a))2
Rear Brake grabbing severely (1.2.1 (c))2
Wheel alignment incorrect which adversely affects the handling (2.4 (a))2
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))2
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))2
Rear Position lamp not working (4.2.1 (a))2
Rear Rear reflector missing (4.8.2 (a) (ii))2
Offside Rear Direction indicator not working (4.4.1 (a) (ii))2
Rear Wheel bearing has excessive play (5.1.3 (a) (i))2
Front Brake lever has insufficient reserve travel (1.1.2 (a))2
Riders seat insecure (6.2.5 (a) (ii))2
Roller brake test Neither brake control achieves an efficiency of 25% (1.2.2 (a) (i))2
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))2
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))2
Offside Headlamp not working on main beam (4.1.1 (a) (ii))2
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))2
Nearside Front Brake lever has insufficient reserve travel (1.1.2 (a))2
Front Steering operation restricted in free movement from lock to lock loose brake hose restricting free movment (2.1.4 (c))2
Shock absorber has a serious fluid leak (5.3.2 (b))2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy