| Most common failures | No# failures |
|---|
| Steering headbearing has excessive free play |2.2.2| | 69 |
| Headlamp aim out of alignment | 41 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 34 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 26 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 21 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 21 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 20 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 13 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Horn not working |1.7.3a| | 10 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Rear reflector on motorcycle obscured |1.4.1| | 8 |
| Rear reflector on motorcycle obscured |1.4.2b| | 8 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 8 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 8 |
| Brake hose damaged | 7 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
| Registration plate lamp issues | 7 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 5 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 5 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 5 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 5 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 5 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 4 |
| Nearside Front suspension assembly component excessively corroded. |2.3.1| | 4 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Offside Rear Direction indicators not working |1.5.1c| | 4 |
| Front Steering headbearing has excessive free play |2.2.2| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
| Riders seat insecure |6.2.1a| | 4 |
| Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 3 |
| Offside Front suspension assembly component excessively corroded. |2.3.1| | 3 |
| Brake hose excessively deteriorated | 3 |
| Headlamp aim not tested |1.6| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Upper Steering headbearing has excessive free play |2.2.2| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 3 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Front Brake pipe inadequately supported |3.2.B2b| | 2 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 2 |
| Registration plate issues | 2 |
| Direction indicator not working |1.5.1c| | 2 |
| Front suspension assembly component excessively corroded. |2.3.1| | 2 |
| Handlebar mounting clamp loose |2.1.1a| | 2 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Headlamp aim not tested |4.1.2 |b|| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Lower Steering headbearing has excessive free play |2.2.2| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Front Brake disc contaminated |1.1.14 |b|| | 2 |
| Rear suspension component seized |2.4A2a|ii|| | 2 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Fuel cap sealing washer torn |7.2.2c| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
| All direction indicators not working (4.4.1 (a) (ii)) | 2 |
| Front Wheel excessively distorted (5.2.2 (c) (i)) | 2 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
| Nearside Motorcycle structure is so deformed it is likely to adversely affect braking or steering LOCK STOP |6.1.1 |a| |ii|| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Rear Rear suspension component seized |2.4A2a|ii|| | 1 |
| Offside Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear suspension bush excessively deteriorated Engine mounting bush |2.4.A2a|i|| | 1 |
| Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Drive belt guard fouling another component |6.2.1c| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Outer Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Centre Rear Rear reflector on motorcycle insecure |1.4.2c| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Front Shock absorber has a serious fluid leak stantion pitted |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak stantion pitted |5.3.2 |b|| | 1 |
| Nearside Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment Excessive travel of rear brake lever. |1.1.15 |f|| | 1 |
| Nearside Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Brake disc|s| has excessive run out warped |3.2.A1m| | 1 |
| Nearside Headlamp aim headlamp deteriorated and function impaired bulb |1.2.3a| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Front Shock absorber has a serious fluid leak BOTH LEGS |5.3.2 |b|| | 1 |
| Front Shock absorber has an excessively worn bush BOTH LEGS |5.3.2 |c|| | 1 |
| Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| An item not tested |Manual| | 1 |
| Front suspension assembly component excessively bent |2.3.1| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| All position lamps do not illuminate immediately when switched on number plate light |1.1.3a| | 1 |
| Front shock absorber seal failed and leaking oil front folks |2.3.3| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies brake |1.3.1a| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Nearside Rear Shock absorber insecurely attached |5.3.2 |a| |i|| | 1 |
| Rear Brake lever attachment screws missing |3.1.2b| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Rear suspension bush has excessive free play engine |2.4.A2a|i|| | 1 |
| Rear Brake lever is inoperative |3.1.3c| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Motorcycle structure excessively damaged center stand bent and could cause to touch ground |6.1.1a| | 1 |
| Front Upper Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Brake drum|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Rear Rear wheel insecure |4.2.3b| | 1 |
| Nearside Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Upper Front suspension assembly component loose |2.3.1| | 1 |
| Nearside Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Central Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Central Exhaust excessively deteriorated |7.1.1a| | 1 |
| Centre Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Shock absorber missing R/H |5.3.2 |a| |ii|| | 1 |
| Stop lamp not working front switch |4.3.1 |a| |ii|| | 1 |
| Rear reflector defective or damaged by more than 50% of the reflecting surface obscured by l plate |4.8.1 |a| |ii|| | 1 |
| Stop lamp does not illuminate immediately a brake applies front switch |1.3.1a| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Rear reflector on sidecar incorrectly positioned |1.4.2d| | 1 |
| Rear Rear shock absorber has inadequate damping effect. Both rear shocks leaked dry |2.4.A.3b| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Front Brake caliper insecurely mounted and braking performance affected bolts loose |1.1.16 |c| |ii|| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Outer Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Brake lever insecure |3.1.2a| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Front Headlamp switch faulty |1.2.4| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Front Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
| Offside Rear Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Headlamp switch faulty Dip switch |1.2.4| | 1 |
| Front Headlamp incorrect colour |1.2.1| | 1 |
| Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Nearside Front Brake lever has inadequate reserve travel rear brake lever |3.1.3b| | 1 |
| Offside Front Brake hose fouling |3.2.B3b| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front Rear wheel insecure |4.2.3b| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
| Floor brake test indicates a sticking brake rear brake cable not releasing smoothly |3.3.C2c| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Brake component is excessively corroded pads separating |3.1.5| | 1 |
| Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Brake lever insecure |3.1.2a| | 1 |
| Nearside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Offside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Rear Brake lever has restricted free movement |1.1.15 |e|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Stop lamp lens defective such that the emitted light is adversely affected |4.3.1 |b| |ii|| | 1 |
| All direction indicators adversely affected by the operation of another lamp rear indicators wired wrong way |4.4.3 |b|| | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp |4.3.3 |b|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Rear Brake lever pivot has excessive free play |1.1.1 |b|| | 1 |
| Central Rear Floor brake test indicates a binding brake Brake Binds And Sticks On When Applied |3.3.C2c| | 1 |
| Central Front Steering headbearing has excessive free play Headstock Has Knock Bearings Worn Or loose |2.2.2| | 1 |
| Brake lever has inadequate reserve travel No reserve travel , possible cable stretching |3.1.3b| | 1 |
| Steering headbearing has excessive free play freeplay in headstock |2.2.2| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing bearing is notch y coming off center position |2.2.1a| | 1 |
| Central Rear Rear reflector on motorcycle missing Reflector Missing |1.4.1| | 1 |
| Offside Front Brake lever has inadequate reserve travel Front Brake Has No Reserve Travel |3.1.3b| | 1 |
| Nearside Brake lever has inadequate reserve travel Rear Brake Lever Has No reserve Travel |3.1.3b| | 1 |
| Central Front Upper Steering headbearing has excessive free play Headstock Bearings Have Excessive Play |2.2.2| | 1 |
| Central Front Roller brake test indicates excessive fluctuation of brake effort Front Brake Has Fluctuation |3.3.A1d| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Nearside Front suspension assembly component excessively corroded. fork stantion |2.3.1| | 1 |
| Offside Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Brake caliper insecurely mounted and braking performance affected Caliper slider plate rubber support missing |1.1.16 |c| |ii|| | 1 |
| Nearside Front Forks excessively corroded |2.2.2 |d| |i|| | 1 |
| Offside Front Forks excessively corroded Oil seal leaking excessively |2.2.2 |d| |i|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Rear Shock absorber has a serious fluid leak Fork dampening rod badly corroded |5.3.2 |b|| | 1 |
| Rear reflector missing Completely covered up by rear L Plate |4.8.2 |a| |ii|| | 1 |
| Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Fuel cap leaking Fuel cap rubber split |6.1.3 |b| |i|| | 1 |
| Roller brake test brake efficiency less than 27.5% overall |1.2.2 |a| |ii|| | 1 |
| Front Brake hose excessively kinked |3.2.B3a| | 1 |
| Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
| Forks excessively corroded |2.2.2 |d| |i|| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Steering linkage ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Front Valve stem seriously damaged fit a new valve (5.2.3 (j)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Rear Wheel hub worn to the extent that wheel security is adversely affected wheel spacers missing (5.2.1 (b) (ii)) | 1 |
| Nearside Rear Suspension attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Rear Stop lamp not working both (4.3.1 (a) (ii)) | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both fork tubes (6.1.1 (c) (i)) | 1 |
| Rear Lower Exhaust silencer insecure mounting bolt missing (8.1.1 (b) (i)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Wheel has loose rivet/s or bolts (5.2.2 (e) (i)) | 1 |
| Rear Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Rear Shock absorber has negligible damping effect Both Rear Shocks (5.3.2 (b)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Front Shock absorber has a serious fluid leak L/H (5.3.2 (b)) | 1 |
| Front Steering linkage component modified such that the steering is adversely affected excess movement felt at handle bars (2.1.3 (f) (ii)) | 1 |
| Steering headbearing has excessive wear or free play Steering is loose turning left to right (2.2.2 (f) (i)) | 1 |
| Rear Brake grabbing severely (1.2.1 (c)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls front control not working (4.3.2 (a) (iii)) | 1 |
| Front Steering headbearing has excessive wear or free play head bearings loose (2.2.2 (f) (i)) | 1 |
| Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Steering headbearing in such a condition that steering control is adversely affected Free play on lock to lock (2.2.2 (f) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Front Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
| Rear Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 1 |
| Rear Shock absorber has negligible damping effect Very hard little travel in system (5.3.2 (b)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
| Front Valve stem seriously damaged perished (5.2.3 (j)) | 1 |
| Rear Valve stem seriously damaged perished (5.2.3 (j)) | 1 |
| Steering headbearing has excessive wear or free play free play (2.2.2 (f) (i)) | 1 |
| Rear Shock absorber has negligible damping effect Rear shock damping (5.3.2 (b)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition baffle missing (8.1.1 (a)) | 1 |
| Exhaust silencer insecure bolt missing (8.1.1 (b) (i)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |