>

MOT History from tests of petrol LEXMOTO ARROWs year 2016

Review the list of common LEXMOTO ARROW failures below or to perform a specific mot history check on your LEXMOTO then use our popular KnowYourCar service

mot history
Pass percent:59.04%
(The average a petrol LEXMOTO ARROW year 2016 passes without issue)
Based on:83 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment5
Rear Shock absorber has negligible damping effect (5.3.2 (b))3
Stop lamp remains on when the brakes are released3
Rear reflector missing |4.8.2 |a| |ii||3
Rear Footrest missing (6.2.12 (a))3
Nearside Rear Footrest missing (6.2.12 (a))2
Offside Rear Footrest missing (6.2.12 (a))2
Front Position lamp not working (4.2.1 (a))2
Headlamp not working on main beam (4.1.1 (a) (ii))2
Headlamp insecure (4.1.1 (c))2
Rear Position lamp not working |4.2.1 |a||2
Wheel alignment incorrect which adversely affects the handling |2.4 |a||1
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))1
Drive chain excessively loose (6.1.7 (c) (i))1
Suspension component pin or bush excessively worn Swinging Arm Bush (5.3.4 (a) (i))1
Suspension arm pin or bush excessively worn swinging arm bearings (5.3.4 (a) (i))1
Offside Rear Footrest insecure (6.2.12 (a))1
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i||1
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))1
Nearside Front Handlebar mounting insecure (2.2.1 (a) (i))1
Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))1
Suspension arm pin or bush excessively worn Swinging arm pivot (5.3.4 (a) (i))1
Steering headbearing in such a condition that steering control is adversely affected Notchy /tight (2.2.2 (f) (ii))1
Stop lamp not working rear control (4.3.1 (a) (ii))1
Front Brake has no recorded effort at a wheel |1.2.1 |a| |ii||1
Handlebar excessively deformed |2.2.1 |c| |i||1
Rear Wheel bearing has excessive play |5.1.3 |a| |i||1
Stop lamp not working |4.3.1 |a| |ii||1
Roller brake test brake efficiency less than 27.5% overall |1.2.2 |a| |ii||1
Nearside Drive chain excessively loose (6.1.7 (c) (i))1
Rear Brake component insecure rear torque arm front fixing insecure (1.1.21 (c))1
Rear Brake grabbing severely (1.2.1 (c))1
Offside Rear All direction indicators light intensity significantly reduced (4.4.3 (a))1
Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))1
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i))1
Rear Valve stem seriously damaged (5.2.3 (j))1
Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Shock absorber has negligible damping effect Rear |5.3.2 |b||1
Suspension arm insecurely attached Swingarm (5.3.3 (a) (i))1
Suspension component pin or bush excessively worn swingarm bearings (5.3.4 (a) (i))1
Engine mounting/bracket missing (6.1.8 (a) (ii))1
Rear reflector missing (4.8.2 (a) (ii))1
Footrest missing Pillion (6.2.12 (a))1
Rear Suspension arm corroded and seriously weakened hole in swinging arm (5.3.3 (b) (i))1
Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Nearside Rear Footrest insecure Cable tie insufficient as an attachment (6.2.12 (a))1
Stop lamp not working not working on either brake system |4.3.1 |a| |ii||1
Offside Rear Direction indicator likely to become detached |4.4.1 |c| |ii||1
Footrest missing both passenger footrests missing |6.2.12 |a||1
Position lamp switch does not operate in accordance with the requirements will not switch lights off fully (4.2.2 (a))1
Rear Brake pedal pivot excessively tight (1.1.1 (a))1
Drive chain excessively tight (6.1.7 (k) (i))1
Front Brake effort inadequate at a wheel (1.2.1 (a) (i))1
Front Brake lever has insufficient reserve travel (1.1.2 (a))1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Rear Stop lamp not working (4.3.1 (a) (ii))1
Wheel alignment incorrect which adversely affects the handling (2.4 (a))1
Rear reflector missing Obscured |4.8.2 |a| |ii||1
Front Position lamp not working |4.2.1 |a||1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))1
Suspension arm attachment bracket/mounting insecure swinging arm play in bushes (5.3.3 (a) (i))1
Fuel tank leaking (6.1.3 (b) (i))1
Front Brake caliper inadequately mounted and braking performance affected bolt missing (1.1.16 (c) (ii))1
Rear Wheel bearing rough when rotated (5.1.3 (b) (i))1
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))1
Shock absorber has negligible damping effect (5.3.2 (b))1
Rear Shock absorber has negligible damping effect |5.3.2 |b||1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy