>

MOT History from tests of petrol LEXMOTO ARROWs year 2014

Review the list of common LEXMOTO ARROW failures below or to perform a specific mot history check on your LEXMOTO then use our popular KnowYourCar service

mot history
Pass percent:58.46%
(The average a petrol LEXMOTO ARROW year 2014 passes without issue)
Based on:804 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment47
Rear Position lamp not working (4.2.1 (a))19
Drive chain worn to excess |6.2.1e|15
Drive chain worn to excess (6.1.7 (c) (i))12
Drive chain excessively loose (6.1.7 (c) (i))12
Headlamp not working on dipped beam (4.1.1 (a) (ii))11
Drive chain excessively loose |6.1.7 |c| |i||10
Rear Stop lamp not working |4.3.1 |a| |ii||10
Rear reflector missing (4.8.2 (a) (ii))9
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))9
Rear Footrest missing (6.2.12 (a))9
Rear Position lamp not working |4.2.1 |a||9
Stop lamp remains on when the brakes are released9
Front Position lamp not working (4.2.1 (a))8
Rear reflector missing |4.8.2 |a| |ii||8
Drive chain worn to excess |6.1.7 |c| |i||8
Rear Valve stem seriously damaged (5.2.3 (j))8
Direction indicators flashing more than 120 times per minute |1.5.1c|8
Rear reflector on motorcycle missing |1.4.1|8
Nearside Rear Footrest missing |6.2.1a|7
Rear Shock absorber has negligible damping effect (5.3.2 (b))7
Rear Stop lamp not working (4.3.1 (a) (ii))7
Nearside Rear Footrest missing (6.2.12 (a))7
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||6
Drive chain excessively loose |6.2.1d|6
Drive chain so worn it is likely to fail (6.1.7 (c) (ii))6
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))6
Rear Footrest missing |6.2.1a|6
Drive chain excessively tight (6.1.7 (k) (i))5
Drive chain sprocket carrier worn to excess |6.2.1e|5
Registration plate lamp issues5
Rear Shock absorber has negligible damping effect |5.3.2 |b||5
Stop lamp not working (4.3.1 (a) (ii))5
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))5
Registration plate issues5
Front Brake disc insecure |1.1.14 |a| |ii||5
Drive chain excessively tight |6.2.1d|5
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i))5
Rear suspension bush has excessive free play |2.4.A2a|i||5
Offside Rear Footrest missing |6.2.1a|4
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))4
Drive chain sprocket worn to excess |6.2.1e|4
Headlamp insecure |4.1.1 |c||4
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))4
Riders seat insecure (6.2.5 (a) (ii))4
Offside Rear Footrest missing (6.2.12 (a))4
Rear Suspension arm pin or bush excessively worn swing arm (5.3.4 (a) (i))4
Nearside Rear Direction indicators not working |1.5.1c|4
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Rear Valve stem seriously damaged |5.2.3 |j||4
Stop lamp not working |4.3.1 |a| |ii||4
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))4
Horn not working |1.7.3a|4
Wheel alignment incorrect which adversely affects the handling (2.4 (a))3
Front Brake lever has insufficient reserve travel |1.1.2 |a||3
Front Stop lamp not working (4.3.1 (a) (ii))3
Headlamp aim not tested (4.1.2 (b))3
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))3
Drive chain so worn it is likely to fail |6.1.7 |c| |ii||3
Steering movement excessively `notchy` with the wheel raised |2.2.1b|3
Exhaust has a major leak of exhaust gases (6.1.2 (a))3
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||3
Offside Rear Footrest missing |6.2.12 |a||3
Suspension arm corroded and seriously weakened (5.3.3 (b) (i))3
Rear Brake pedal is bent and the brake cannot be readily applied |1.1.2 |d||3
Offside Rear Direction indicator not working (4.4.1 (a) (ii))3
Wheel alignment incorrect which adversely affects the steering |2.4 |a||3
Front Brake lever has insufficient reserve travel (1.1.2 (a))3
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))3
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))3
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c|3
Headlamp not working on main beam (4.1.1 (a) (ii))3
Wheel alignment incorrect which adversely affects the steering (2.4 (a))3
Rear Wheel bearing has excessive play (5.1.3 (a) (i))3
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Rear Footrest missing |6.2.12 |a||3
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))3
Horn sound not in accordance with requirements (7.7 (c))2
Drive chain excessively tight |6.1.7 |k| |i||2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Front Brake lever cannot be applied smoothly |3.1.3d|2
Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))2
Wheel alignment incorrect which adversely affects the handling |2.4 |a||2
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||2
Drive chain so loose it is likely to fail |6.1.7 |c| |ii||2
Headlamp light intensity severely reduced (4.1.4 (a))2
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))2
Rear suspension bush has excessive free play swinging arm |2.4.A2a|i||2
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c|2
Engine mounting/bracket excessively loose (6.1.8 (a) (ii))2
Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i||2
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||2
All position lamps not working (4.2.1 (a))2
Rear reflector on motorcycle obscured |1.4.2b|2
Rear Roller brake test indicates a sticking brake |3.3.A1a|2
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Nearside Rear Direction indicator not working |1.5.1c|2
Drive chain sprocket worn to excess |6.1.7 |c| |i||2
Exhaust silencer insecure |8.1.1 |b| |i||2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|2
Rear Rear reflector missing |4.8.2 |a| |ii||2
Front Direction indicator obviously incorrectly positioned (4.4.3 (a))2
Rear Rear suspension bush has excessive free play |2.4.A2a|i||2
Front Brake disc|s| insecure |3.2.A1g|2
Drive chain sprocket worn to excess (6.1.7 (c) (i))2
Headlamp not working on dipped beam |4.1.1 |a| |ii||2
Rear Brake lagging in operation (1.2.1 (d))2
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))2
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a))2
Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii))2
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))2
Exhaust has a major leak of exhaust gases |6.1.2 |a||2
Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Drive chain so loose it is likely to fail (6.1.7 (c) (ii))2
All direction indicators not working |4.4.1 |a| |ii||2
Front mudguard insecure |2.3.7|2
Rear Drive chain sprocket worn to excess |6.2.1e|2
Nearside Rear Footrest missing |6.2.12 |a||2
Front Stop lamp not working |4.3.1 |a| |ii||2
Rear Brake pedal has inadequate reserve travel |3.1.3b|2
Rear Brake pedal has insufficient reserve travel |1.1.2 |a||2
Shock absorber has negligible damping effect both (5.3.2 (b))2
Offside Rear Direction indicator not working |1.5.1c|2
All direction indicators not working (4.4.1 (a) (ii))2
Offside Rear Footrest insecure |6.2.12 |a||2
Nearside Rear Drive chain excessively loose (6.1.7 (c) (i))2
Nearside Rear Drive chain worn to excess (6.1.7 (c) (i))2
Nearside Front Direction indicator not working (4.4.1 (a) (ii))2
Central Front Position lamp not working (4.2.1 (a))2
Nearside Rear Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii))2
Nearside Rear Footrest insecure |6.2.12 |a||2
Rear suspension bearing has excessive free play |2.4.A2a|i||2
Exhaust is leaking and excessively noisey |7.1.1b|2
Nearside Front Brake disc insecure (1.1.14 (a) (ii))2
Rear reflector defective or damaged by more than 50% of the reflecting surface |4.8.1 |a| |ii||2
Nearside Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii))2
All position lamps do not illuminate immediately when switched on |1.1.3a|2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy