| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 30 |
| Rear reflector on motorcycle missing |1.4.1| | 17 |
| Drive chain excessively loose |6.2.1d| | 16 |
| Nearside Rear Footrest missing |6.2.1a| | 11 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
| Offside Rear Footrest missing |6.2.1a| | 10 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 9 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 8 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Headlamp insecure |1.2.3b| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Rear reflector on motorcycle obscured |1.4.2b| | 7 |
| Drive chain worn to excess |6.2.1e| | 7 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
| Rear Footrest missing |6.2.1a| | 6 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
| Rear Position lamp not working |4.2.1 |a|| | 4 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 4 |
| Offside Rear Footrest missing |6.2.12 |a|| | 4 |
| Rear reflector missing |4.8.2 |a| |ii|| | 4 |
| Nearside Front Direction indicators not working |1.5.1c| | 4 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Horn not working |1.7.3a| | 4 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 4 |
| Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 4 |
| Rear Position lamp not working (4.2.1 (a)) | 4 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 3 |
| Front suspension has inadequate damping effect. |2.3.6c| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Registration plate issues | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Rear wheel spindle loose |2.4.A.2b| | 3 |
| Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Registration plate lamp issues | 2 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 2 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Nearside Front Indicator switch insecure |1.5.4| | 2 |
| Offside Front Position lamp switch insecure |1.1.4b| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
| Nearside Handlebar deformed |2.1.1b| | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 2 |
| Suspension arm ball joint excessively worn swinging arm mounting |5.3.4 |a| |i|| | 2 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Nearside Footrest missing |6.2.1a| | 2 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Rear Drive chain worn to excess |6.2.1e| | 2 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
| Front Brake excessively binding |1.2.1 |f|| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Stop lamp not working on both controls |4.3.1 |a| |ii|| | 1 |
| Rear Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Rear suspension bush has excessive free play swing arm bushes worn |2.4.A2a|i|| | 1 |
| Throttle operating incorrectly left hand and right hand switchgears and throttle loose on handle bars |6.2.1f| | 1 |
| Central Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Central Front Suspension arm ball joint excessively worn swing arm (5.3.4 (a) (i)) | 1 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Brake lever is bent and the brake cannot be readily applied |1.1.2 |d|| | 1 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Nearside Rear Suspension attachment bracket/mounting insecure bottom nut loose |5.3.3 |a| |i|| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear suspension bush has excessive free play swing arm bushs |2.4.A2a|i|| | 1 |
| Drive chain sprocket carrier worn to excess play in the drive rubbers |6.2.1e| | 1 |
| Wheel alignment incorrect which adversely affects the handling loose engine |2.5.1| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Offside Front Footrest insecure bent |6.2.1a| | 1 |
| Brake reaction bracket insecure split pin missing from torque arm |3.2.A1j| | 1 |
| Drive chain fouling another component fouling on the remains of the center stand |6.2.1d| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear suspension bush has excessive free play Swinging arm bushes |2.4.A2a|i|| | 1 |
| Rear Rear suspension component loose rear swing arm pivot bolt no locking split in casalated nut |2.4.A.1a| | 1 |
| Rear suspension bush has excessive free play both swing arm bushes |2.4.A2a|i|| | 1 |
| Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Rear suspension bush has excessive free play swingarm |2.4.A2a|i|| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Centre Rear reflector on motorcycle obscured obscured by l-plate |1.4.2b| | 1 |
| Nearside Rear Footrest insecure securing bolt/pin missing |6.2.1a| | 1 |
| Centre Rear Rear suspension bush has excessive free play swinging arm loose |2.4.A2a|i|| | 1 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| All position lamps do not illuminate immediately when switched on side light not working |1.1.3a| | 1 |
| Rear Drive chain sprocket worn to excess cush hub (6.1.7 (c) (i)) | 1 |
| Front Direction indicator insecure |1.5.3b| | 1 |
| Brake component inadequately mounted split pin missing |1.1.21 |c|| | 1 |
| Direction indicators flashing more than 120 times per minute 3 x remaining working ones |1.5.1c| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Brake lagging in operation (1.2.1 (d)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Floor brake test indicates a sticking brake rear drum pivot |3.3.C2c| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Throttle operating incorrectly handlebar controls loose |6.2.1f| | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear reflector defective or damaged by more than 50% of the reflecting surface L plate covering reflector (4.8.1 (a) (ii)) | 1 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Nearside Front Brake disc insecure |1.1.14 |a| |ii|| | 1 |
| Rear Suspension arm corroded and seriously weakened swinging arm |5.3.3 |b| |i|| | 1 |
| Rear Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Offside Handlebar deformed |2.1.1b| | 1 |
| Offside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
| Steering headbearing in such a condition that steering control is adversely affected head bearings excessively tight / notchy |2.2.2 |f| |ii|| | 1 |
| Suspension arm ball joint excessively worn [swinging arm bearings] |5.3.4 |a| |i|| | 1 |
| Rear Rear suspension bush has excessive free play SWINGING ARM ASSEMBLY. |2.4.A2a|i|| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Nearside Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
| Offside Brake pedal is bent and the brake cannot be readily applied |1.1.2 |d|| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Stop lamp not working on rear brake switch (4.3.1 (a) (ii)) | 1 |
| Sidecar rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Front Throttle operating incorrectly controls affected by throttle |6.2.1f| | 1 |
| Steering headbearing has excessive free play tight & notchy |2.2.2| | 1 |
| Offside Direction indicators flashing more than 120 times per minute flash to fast |1.5.1c| | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied sitting excessively high to footrest |3.1.3c| | 1 |
| Rear suspension bearing has excessive free play swingarm bushes have excessive movement |2.4.A2a|i|| | 1 |
| Drive chain excessively loose excessively loose & worn |6.2.1d| | 1 |
| Wheel alignment incorrect which adversely affects the handling front forks twisted out of alignment |2.5.1| | 1 |
| Rear Roller brake test indicates a severely juddering brake juddering & severe screeching |3.3.A1b| | 1 |
| Rear All position lamps not working (4.2.1 (a)) | 1 |
| Stop lamp not working when either brake applied (4.3.1 (a) (ii)) | 1 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Front position lamp does not illuminate immediately when switched on side light |1.1.3a| | 1 |
| Direction indicator not working all |1.5.1c| | 1 |
| Headlamp aim not tested no pattern to check-bulb holder not fitted correctly? |1.6| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection steering lock insecure |2.1.2c| | 1 |
| Wheel alignment incorrect which adversely affects the handling on rear wheel adjusters |2.5.1| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Suspension arm pin or bush excessively worn swinging arm mounting excess play (5.3.4 (a) (i)) | 1 |
| Drive chain sprocket so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Stop lamp light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
| Rear suspension bush has excessive free play swing arm |2.4.A2a|i|| | 1 |
| Front Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Front Exhaust has a major leak of exhaust gases Engine to front pipe |6.1.2 |a|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Brake pedal is inoperative |3.1.3c| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride split pin missing on rear hub |6.2.1h| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Stop lamp not working from rear brake lever application (4.3.1 (a) (ii)) | 1 |
| Offside Rear Brake component insecure brake reaction securing bolt loose and split pin missing (1.1.21 (c)) | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Stop lamp does not illuminate immediately a brake applies rear brake light not working |1.3.1a| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear chain adjusters undone and threads worn away to enable to be adjusted. |6.2.1h| | 1 |
| Rear suspension bush has excessive free play Pivot bushes |2.4.A2a|i|| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Central Front Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected keeping brake on (1.1.2 (b) (ii)) | 1 |
| Rear Brake component insecure reaction arm loose and split pin missing (1.1.21 (c)) | 1 |
| Rear Brake grabbing severely (1.2.1 (c)) | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Nearside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Rear suspension bush has excessive free play Swinging Arm Bushes |2.4.A2a|i|| | 1 |
| Nearside Drive chain excessively loose |6.2.1d| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort Insecure Caliper |3.3.A1d| | 1 |
| Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Footrest missing |6.2.1a| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts Out of clamp |3.2.B2c| | 1 |
| Front Horn control not functioning. |1.7.2b| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride fitted wrong way |6.2.1h| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Central Steering headbearing has excessive free play strip and greased |2.2.2| | 1 |
| Nearside Rear Footrest missing replace |6.2.1a| | 1 |
| Offside Rear Footrest missing replace |6.2.1a| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Nearside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Brake component insecure |1.1.21 |c|| | 1 |
| Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Rear Lower Rear shock absorber insecurely mounted shock bush |2.4.A.3b| | 1 |
| Rear Rear suspension bush has excessive free play swing arm bushes |2.4.A2a|i|| | 1 |
| Direction indicators flashing more than 120 times per minute all four |1.5.1c| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a| | 1 |
| Nearside Rear Rear suspension bearing has excessive free play swingarm pivot |2.4.A2a|i|| | 1 |
| Nearside Footrest insecure mounting pulled from frame |6.2.1a| | 1 |
| Footrest missing pillion |6.2.1a| | 1 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear suspension bearing has excessive free play swing arm |2.4.A2a|i|| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear brake applied |1.3.1a| | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear Rear suspension bush has excessive free play swinging arm |2.4.A2a|i|| | 1 |
| Stop lamp not working on the operation of the rear foot brake |4.3.1 |a| |ii|| | 1 |
| Dipswitch does not operate immediately when selected on dipped beam does not readily switch from main to dip |4.1.3 |b|| | 1 |
| Wheel alignment incorrect which adversely affects the handling rear wheel miss aligned |2.4 |a|| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Rear Rear suspension bush has excessive free play swinging arm bushes |2.4.A2a|i|| | 1 |
| Front Exhaust is leaking and excessively noisey cylinder head bolt broken |7.1.1b| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Brake locking device missing rear torque arm mounting bolt |3.2.A1e| | 1 |
| Brake locking device insecure rear torque arm loose |3.2.A1e| | 1 |
| Brake locking device missing rear torque arm split pin |3.2.A1e| | 1 |
| Fuel system component leaking carb flooding |7.2.1a| | 1 |
| Rear suspension bearing has excessive free play Swingarm bearings |2.4.A2a|i|| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars Handlebar hitting tank |2.1.2b| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii)) | 1 |
| Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning |4.4.1 |a| |ii|| | 1 |
| Brake rod insecure rear brake rod disconnected |1.1.15 |c|| | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
| Front Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Suspension arm pin or bush excessively worn Swing arm, both sides |5.3.4 |a| |i|| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| All position lamps do not illuminate immediately when switched on all lights not working |1.1.3a| | 1 |
| Rear Brake locking device missing split in missing |3.2.A1e| | 1 |
| Motorcycle structure excessively damaged Engine mounts have excessive free play |6.1.1a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Nearside Front Indicator tell tale not functioning |1.5.2| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear suspension bush has excessive free play swing arm bushes |2.4.A2a|i|| | 1 |
| Direction indicator not working all four |1.5.1c| | 1 |
| Stop lamp does not illuminate immediately a brake applies from rear brake |1.3.1a| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride torque arm |6.2.1h| | 1 |
| Rear suspension bush has excessive free play swinging arm bushes |2.4.A2a|i|| | 1 |
| Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Rear suspension bearing has excessive free play Swing arm |2.4.A2a|i|| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Front position lamp insecure |1.1.1c| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Horn not working when lights are on headlight |7.7 |a| |ii|| | 1 |
| Offside Brake clevis joint excessively worn on foot brake pedal |1.1.15 |b|| | 1 |
| Nearside Front Brake hose damaged and likely to fail at caliper |1.1.12 |a|| | 1 |
| Nearside Front Brake component insecure lock tabs to secure on front brake disc |1.1.21 |c|| | 1 |
| Nearside Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Nearside Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Nearside Rear Drive chain sprocket so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Nearside Rear Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Offside Rear Exhaust system insecure rear mount bolt loose (6.1.2 (a)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |