| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 47 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 14 |
| Stop lamp remains on when the brakes are released | 13 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 13 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 11 |
| Rear reflector missing (4.8.2 (a) (ii)) | 10 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 10 |
| Front Position lamp not working (4.2.1 (a)) | 9 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 9 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 8 |
| Front Brake excessively binding (1.2.1 (f)) | 7 |
| Registration plate issues | 7 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 7 |
| Registration plate lamp issues | 6 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 6 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 6 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 5 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 5 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 5 |
| Front Brake excessively binding |1.2.1 |f|| | 5 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 5 |
| Front Position lamp not working |4.2.1 |a|| | 5 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 5 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 5 |
| Offside Rear Footrest missing (6.2.12 (a)) | 5 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 4 |
| Rear Brake grabbing severely (1.2.1 (c)) | 4 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 4 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Headlamp insecure (4.1.1 (c)) | 4 |
| Rear reflector missing |4.8.2 |a| |ii|| | 4 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 4 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 3 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 3 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 3 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 3 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 3 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Horn not working |7.7 |a| |ii|| | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 3 |
| Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 2 |
| Rear Footrest missing (6.2.12 (a)) | 2 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
| Position lamp not working (4.2.1 (a)) | 2 |
| Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 2 |
| Headlamp aim not tested (4.1.2 (b)) | 2 |
| Fuel cap ineffective (6.1.3 (b) (i)) | 2 |
| Offside Front Footrest missing (6.2.12 (a)) | 2 |
| Offside Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 2 |
| Rear Brake grabbing severely |1.2.1 |c|| | 2 |
| Rear Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
| Front Exhaust system insecure |6.1.2 |a|| | 2 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 2 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 2 |
| Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 2 |
| Nearside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Offside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| All direction indicators not working |4.4.1 |a| |ii|| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 2 |
| Offside Front Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 2 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear Exhaust system insecure (6.1.2 (a)) | 2 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
| Rear Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Exhaust system insecure (6.1.2 (a)) | 2 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |
| Handlebar fractured to the extent that detachment is likely (2.2.1 (c) (ii)) | 1 |
| Stop lamp not working from rear brake control (4.3.1 (a) (ii)) | 1 |
| Floor brake test brake efficiency less than 27.5% overall |1.2.2 |a| |ii|| | 1 |
| Front Headlamp aim not tested |4.1.2 |b|| | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Front All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Front Brake lever so insecure that the brake cannot be readily applied |1.1.2 |e| |ii|| | 1 |
| Rear Brake lever so insecure that the brake cannot be readily applied Rear brake pedal seized. |1.1.2 |e| |ii|| | 1 |
| Front Clutch lever bent so it cannot be readily operated Clutch lever broken and botched with spanner. |6.2.7 |b|| | 1 |
| Front Brake grabbing severely |1.2.1 |c|| | 1 |
| Rear Drive chain so worn it is likely to fail Drive chain seized. |6.1.7 |c| |ii|| | 1 |
| Offside Rear Brake pivot has restricted free movement (1.1.15 (e)) | 1 |
| Steering headbearing excessively stiff or notchy Headrace notchy (2.2.2 (f) (i)) | 1 |
| Central Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Position lamp showing white light to the rear Lens broken (4.2.3 (a) (ii)) | 1 |
| Rear Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Brake linkage has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
| Nearside Front Brake caliper has no reserve travel and braking performance affected |1.1.16 |e| |ii|| | 1 |
| Brake pedal mounting insecure |3.1.2a| | 1 |
| Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Central Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Position lamp lens seriously defective (4.2.1 (b)) | 1 |
| Rear Brake pedal insecure (1.1.2 (e) (i)) | 1 |
| Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Offside Front Footrest missing |6.2.12 |a|| | 1 |
| Stop lamp not working Rear brake not operating stop lamp |4.3.1 |a| |ii|| | 1 |
| Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Headlamp aim headlamp damaged and function impaired lens twisted in surround |1.2.3a| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Footrest missing Passenger (6.2.12 (a)) | 1 |
| Offside Front Wheel spindle locking device ineffective (5.2.1 (d)) | 1 |
| Rear Wheel fixing loose (multiple fixings) (5.2.1 (a) (i)) | 1 |
| Rear Footrest missing Rear footpegs missing |6.2.12 |a|| | 1 |
| Front Position lamp missing |4.2.1 |a|| | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Headlamp aim projected beam image obviously incorrect no image (4.1.2 (c)) | 1 |
| Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
| Front Brake caliper damaged (1.1.16 (a) (i)) | 1 |
| Front Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 1 |
| Chain guard insecure (6.1.7 (i)) | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Offside Front Brake hose fouling |3.2.B3b| | 1 |
| Front Brake hose excessively twisted |3.2.B3a| | 1 |
| Front Brake hose stretched by steering movement |3.2.B3b| | 1 |
| Rear Rear suspension fouling which affects the movement of the rear suspension exhaust mounting |2.4.A.3a| | 1 |
| Headlamp not working on main beam Mainbeam warning light also stays on with position light. |4.1.1 |a| |ii|| | 1 |
| Headlamp aim not tested Due to headlight not working. |4.1.2 |b|| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied Rear brake levers resting position was far too high.This was because the stop bolt was too short. (1.1.2 (d)) | 1 |
| Rear Stop lamp not working rear stop switch was not operating as the lever was too high (4.3.1 (a) (ii)) | 1 |
| Rear Suspension arm attachment bracket/mounting insecure Rear swinging arm pivot bolt was loose (5.3.3 (a) (i)) | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Brake rod insecure split pin missing |1.1.15 |c|| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Brake pedal insecure circlip missing (1.1.2 (e) (i)) | 1 |
| Rear Brake drum missing torque arm split pin missing (1.1.14 (c)) | 1 |
| Nearside Front Brake lever insecure nut missing off clutch bolt (1.1.2 (e) (i)) | 1 |
| Stop lamp does not illuminate immediately a brake applies foot |1.3.1a| | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls brake light not working on rear brake pedal (4.3.2 (a) (iii)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Rear Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
| Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Chain guard insecure |6.1.7 |i|| | 1 |
| Rear Upper Motorcycle structure joining/attachment plate or fastening insecure |6.1.1 |b| |i|| | 1 |
| Stop lamp not working rear control (4.3.1 (a) (ii)) | 1 |
| Front Brake caliper inadequately mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Front Brake caliper insecurely mounted and braking performance affected have tightened for safety as probably riding away but not safwe to ride (1.1.16 (c) (ii)) | 1 |
| Front Shock absorber has a serious fluid leak both fork seals leaking (5.3.2 (b)) | 1 |
| Brake performance unable to be tested (1.2.1 (g)) | 1 |
| Offside Front Direction indicator not working not working (4.4.1 (a) (ii)) | 1 |
| Front Brake master cylinder leaking master cylinder leak (1.1.10 (b) (ii)) | 1 |
| Front Position lamp not working fit a bulb |4.2.1 |a|| | 1 |
| Front Brake cylinder leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Front Stop lamp not working switch faulty (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear Brake pedal so insecure that the brake cannot be readily applied fouling another component |1.1.2 |e| |ii|| | 1 |
| Offside Brake component insecure rear brake pedal locking device missing |1.1.21 |c|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Wheel alignment incorrect which adversely affects the steering handle bars not straight |2.4 |a|| | 1 |
| Stop lamp not working From front control. (4.3.1 (a) (ii)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Headlamp reflector seriously defective (4.1.1 (b) (ii)) | 1 |
| Drive chain sprocket so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Front Brake master cylinder leaking cap leaking |1.1.10 |b| |ii|| | 1 |
| Front Wheel spoke excessively loose |5.2.2 |d|| | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Rear Stop lamp showing white light to the rear |4.3.3 |a| |ii|| | 1 |
| Brake hose excessively deteriorated | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Offside Rear Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Front Stop lamp not working front brake (4.3.1 (a) (ii)) | 1 |
| Fuel tank leaking (6.1.3 (b) (i)) | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Rear Stop lamp not working rear brake light switch replaced (4.3.1 (a) (ii)) | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Stop lamp not working foot brake micro switch faulty |4.3.1 |a| |ii|| | 1 |
| Rear Footrest missing both |6.2.12 |a|| | 1 |
| Rear Stop lamp not working control |4.3.1 |a| |ii|| | 1 |
| Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
| Drive chain excessively loose adjusted to suit. (6.1.7 (c) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak Fork seal leaking (5.3.2 (b)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Fuel tank insecure |6.1.3 |a| |i|| | 1 |
| Nearside Rear Shock absorber insecurely attached |5.3.2 |a| |i|| | 1 |
| All direction indicators not working all (4.4.1 (a) (ii)) | 1 |
| Rear Stop lamp with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii)) | 1 |
| Central Front Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
| Central Fuel cap leaking (6.1.3 (b) (i)) | 1 |
| Brake pedal is bent and the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Drive chain excessively tight Drive chain has a bad tight spot (6.1.7 (k) (i)) | 1 |
| Rear Brake grabbing severely Bad grabbing when foot on pedal (1.2.1 (c)) | 1 |
| Handlebar deformed to the extent that steering is affected |2.2.1 |c| |ii|| | 1 |
| Stop lamp not working rear brake |4.3.1 |a| |ii|| | 1 |
| Wheel alignment incorrect which adversely affects the handling front twisted |2.4 |a|| | 1 |
| Headlamp insecure shell cracked |4.1.1 |c|| | 1 |
| Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride joining link clip missing |6.2.1h| | 1 |
| Central Front Upper Headlamp not working on main beam Only works when in neutral ! Shifting into gear turns headlamp off ! (4.1.1 (a) (ii)) | 1 |
| Central Front Upper Headlamp not working on dipped beam Only works when in neutral ! Shifting into gear turns headlamp off ! (4.1.1 (a) (ii)) | 1 |
| Stop lamp not working Brake control 1 (4.3.1 (a) (ii)) | 1 |
| Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
| Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
| Stop lamp not working With brake control 2 |rear brake| |4.3.1 |a| |ii|| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Brake master cylinder defective but brake still operating Brake lever locks into place not allowing brake to fully lock |1.1.10 |b| |i|| | 1 |
| Stop lamp does not illuminate by the operation of both brake controls REAR BRAKE LIGHT NOT OPERATIONAL (4.3.2 (a) (iii)) | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Front Headlamp has more than 1/2 LEDs not functioning |4.1.1 |a| |ii|| | 1 |
| Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Offside Front Brake cylinder leaking (1.1.16 (b) (i)) | 1 |
| Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected spring adrift (1.1.2 (b) (ii)) | 1 |
| Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Exhaust system insecure Nuts loose at head (6.1.2 (a)) | 1 |
| Rear Exhaust system insecure Mounting - fixing missing (6.1.2 (a)) | 1 |
| Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Brake linkage has restricted free movement exhaust mount fowling (1.1.15 (e)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Brake performance not tested due to operation of rear brake (1.2.1 (g)) | 1 |
| Rear Brake lagging in operation brake operation - no gradual increase (1.2.1 (d)) | 1 |
| Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
| Front Brake master cylinder defective but brake still operating |1.1.10 |b| |i|| | 1 |
| Rear Brake component insecure Brake anchor bolt loose! (1.1.21 (c)) | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Rear Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected |5.2.1 |c| |ii|| | 1 |
| Rear Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
| Rear Stop lamp not working Not Working From Rear Control (4.3.1 (a) (ii)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted Incorrect Direction (6.1.7 (j) (i)) | 1 |
| Offside Rear Wheel more than one fixing loose |5.2.1 |a| |ii|| | 1 |
| Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Fuel cap ineffective |6.1.3 |b| |i|| | 1 |
| Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Front Brake master cylinder insecure |1.1.10 |c|| | 1 |
| Front Brake caliper insecure |1.1.16 |c| |i|| | 1 |
| Exhaust system insecure |6.1.2 |a|| | 1 |
| Rear Stop lamp likely to become detached |4.3.1 |c| |ii|| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Headlamp light source and lamp not compatible led bulb fitted (4.1.4 (c)) | 1 |
| All direction indicators not working Will only flash at high revs (4.4.1 (a) (ii)) | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Front Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
| Brake master cylinder leaking resivoir (1.1.10 (b) (ii)) | 1 |
| Pillion seat insecure bolt missing |6.2.6 |a| |ii|| | 1 |
| Position lamp missing |4.2.1 |a|| | 1 |
| Rear Brake pedal is bent and the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Brake hose excessively stretched (1.1.12 (b) (ii)) | 1 |
| Front Brake fluid contaminated (1.8 (a)) | 1 |
| Stop lamp showing white light to the rear (4.3.3 (a) (ii)) | 1 |
| Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Front Upper Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Nearside Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Stop lamp not working from front brake lever |4.3.1 |a| |ii|| | 1 |
| Stop lamp not working from rear brake lever |4.3.1 |a| |ii|| | 1 |
| Rear Brake component insecure s/pin missing |1.1.21 |c|| | 1 |
| Front Brake master cylinder leaking sight glass broken (1.1.10 (b) (ii)) | 1 |
| Offside All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Nearside All direction indicators not working not flashing (4.4.1 (a) (ii)) | 1 |
| Offside Rear Footrest insecure |6.2.12 |a|| | 1 |