Most common failures | No# failures |
---|
Registration plate lamp issues | 10 |
Headlamp aim out of alignment | 8 |
Parking brake: efficiency below requirements |3.7.B.7| | 5 |
Rear parking brake recording little or no effort | 3 |
Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 3 |
Brakes imbalanced across an axle | 3 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Offside Front Headlamp insecure |1.7.3| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Brake pipe excessively corroded | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 2 |
Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
Centre Front Statutory seat belt missing |5.1.1| | 1 |
Nearside Front Statutory seat belt missing |5.1.1| | 1 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Front brake application uneven | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Rear Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Rear Brake load sensing valve seized |3.6.E.3| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Windscreen has damage | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Inner Front Brake lining|s| less than 1.5 mm thick |3.5.1g| | 1 |
Offside Front Brake pipe leaking |3.6.A.1| | 1 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
Offside Rear rear brake grabbing severely |3.7.A.5b| | 1 |
Rear Brake valve leaking load sensing valve (1.1.7 (d) (i)) | 1 |
Offside Front Obligatory mirror missing |8.1.1| | 1 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i)) | 1 |
Central Exhaust has a major leak of exhaust gases pipe (6.1.2 (a)) | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Wheel stud|s| missing |4.2.A.1e| | 1 |
Offside Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Brake load sensing valve seized |3.6.E.3| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Braking system leaking cylinder |3.6.A.1| | 1 |
Nearside Front Headlamp insecure |1.7.3| | 1 |
Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Central Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` air freshener |8.3.1e| | 1 |
Nearside Rear Outer Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Rear Outer Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Windscreen wiper blade insecure | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Anti-lock braking system warning lamp indicates an ABS fault | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Shock absorber insecure |2.7.2b| | 1 |
Offside Seat belt locking mechanism does not secure or release |5.1.B.6a| | 1 |
Offside Front Fuel pipe insecure |6.7.1b| | 1 |
Nearside Headlamp insecure |1.2.4b| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Steering damper leaking oil |2.2.C.1f| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Centre Steering arm damaged and unserviceable |2.2.C.1d| | 1 |
Steering damper damaged and unserviceable |2.2.C.1d| | 1 |
Offside Rear Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Registration plate issues | 1 |
Nearside All position lamps not working |1.1.A.3b| | 1 |
Offside All position lamps not working |1.1.A.3b| | 1 |
Offside Front Ball joint has excessive play |2.2.B.1f| | 1 |
Battery insecure |1.9.1| | 1 |
Power steering component|s| leaking |2.3.3b| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Brake hose has insufficient room to move | 1 |
Rear brake application uneven | 1 |