Most common failures | No# failures |
---|
Headlamp aim out of alignment | 4 |
Rear Mechanical brake component has restricted free movement | 3 |
Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear brake binding | 2 |
Brake pedal spongy |3.3.B.1b| | 2 |
Registration plate lamp issues | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Headlamp aim out of alignment | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Horn not working |1.6.2a| | 2 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Front Brake hose leaking |3.6.A.1| | 1 |
Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
Steering system excessively tight |2.2.D.1| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Fuel cap/sealing device sealing washer missing |7.2.4c| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Parking brake lever ratchet mechanism is excessively worn |3.1.5| | 1 |
Offside Brake master cylinder/servo mounting prescribed area is excessively corroded floor |3.6.C.3| | 1 |
Nearside Front Wheel nut|s| loose |4.2.A.1e| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Upper Steering pivot point has excessive play |2.2.B.1g| | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Offside Indicator switch faulty |1.4.A.1| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Nearside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
Service brake is causing the steering wheel to severely pull one way |3.7.C.2| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Nearside front brake grabbing severely |3.7.A.2b| | 1 |
Offside Front Lower Intermediate drop arm insecure |2.2.B.1a| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Brakes imbalanced across an axle | 1 |
Offside Rear brake drum contaminated by brake fluid |3.5.1h| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
Nearside Front Headlamp aim beam image obviously incorrect On dip beam. |1.8.A.1b| | 1 |
Offside Obligatory mirror missing |8.1.1| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Direction indicator not working |1.4.A.2c| | 1 |
Fuel cap/sealing device sealing washer missing |7.2.4c| | 1 |
Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
Driver`s door does not latch securely closed |6.2.B.1a| | 1 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |