MOT History from tests of petrol LAND ROVER SERIES 2As year 1961

Review the list of common LAND ROVER SERIES 2A failures below or to perform a specific mot history check on your LAND ROVER then use our popular KnowYourCar service

mot history

Pass percent:68.42%

(The average a petrol LAND ROVER SERIES 2A year 1961 passes without issue)

Based on:57 MOT Tests

Most common failures	No# failures
Rear brake binding	4
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	4
Parking brake: efficiency below requirements \|3.7.B.7\|	3
Headlamp aim out of alignment	2
Exhaust system not adequately supported \|7.1.1\|	2
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Nearside Stop lamp not working \|1.2.1b\|	2
Parking brake lever has no reserve travel \|3.1.6b\|	2
Offside Stop lamp not working \|1.2.1b\|	2
Service brake: efficiency below requirements \|3.7.B.7\|	2
Nearside Upper Axle swivel joint has excessive play in a swivel pin \|2.5.A.3b\|	1
Offside Upper Axle swivel joint has excessive play in a swivel pin \|2.5.A.3b\|	1
Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Centre brake drum contaminated by oil \|3.5.1h\|	1
Rear brake application uneven	1
Brake pedal anti-slip provision worn smooth \|3.3.A.1b\|	1
Nearside Front Axle swivel joint has excessive play \|2.5.A.3b\|	1
Offside Stop lamp adversely affected by the operation of another lamp \|1.2.1f\|	1
Brake master cylinder/servo mounting prescribed area is excessively corroded \|3.6.C.3\|	1
Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.2.C.1c\|	1
Rear Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.2.C.1c\|	1
Nearside Front Direction indicator not working \|1.4.A.2c\|	1
Nearside rear brake recording little or no effort \|3.7.B.5a\|	1
Position lamp switch faulty \|1.1.A.1\|	1
Registration plate lamp issues	1
Nearside Front Headlamp not working on main beam \|1.7.5a\|	1
Offside Front Headlamp not working on main beam \|1.7.5a\|	1
Nearside Front Direction indicator adversely affected by the operation of another lamp \|1.4.A.2h\|	1
Nearside Rear Direction indicator adversely affected by the operation of another lamp \|1.4.A.2h\|	1
Front All position lamps not working \|1.1.A.3b\|	1
Rear All position lamps not working \|1.1.A.3b\|	1
Headlamp not working on dipped beam \|1.7.5a\|	1
Headlamp not working on main beam \|1.7.5a\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Seat belt affected by an insecure seat fixing \|5.2.1b\|	1
Offside Front Seat belt affected by an insecure seat fixing \|5.2.1b\|	1
Nearside Rear Brake pipe inadequately supported \|3.6.B.1\|	1
Offside Rear Brake pipe inadequately supported \|3.6.B.1\|	1
Offside Front front brake binding \|3.7.B.1\|	1
Lower Towbar fixing obviously of an inappropriate size \|6.6.2\|	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Steering system has excessive free play detected at the steering wheel \|steering box fitted\| \|2.2.A.1a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear brake binding	4
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	4
Parking brake: efficiency below requirements \|3.7.B.7\|	3
Headlamp aim out of alignment	2
Exhaust system not adequately supported \|7.1.1\|	2
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Nearside Stop lamp not working \|1.2.1b\|	2
Parking brake lever has no reserve travel \|3.1.6b\|	2
Offside Stop lamp not working \|1.2.1b\|	2
Service brake: efficiency below requirements \|3.7.B.7\|	2
Nearside Upper Axle swivel joint has excessive play in a swivel pin \|2.5.A.3b\|	1
Offside Upper Axle swivel joint has excessive play in a swivel pin \|2.5.A.3b\|	1
Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Centre brake drum contaminated by oil \|3.5.1h\|	1
Rear brake application uneven	1
Brake pedal anti-slip provision worn smooth \|3.3.A.1b\|	1
Nearside Front Axle swivel joint has excessive play \|2.5.A.3b\|	1
Offside Stop lamp adversely affected by the operation of another lamp \|1.2.1f\|	1
Brake master cylinder/servo mounting prescribed area is excessively corroded \|3.6.C.3\|	1
Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.2.C.1c\|	1
Rear Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.2.C.1c\|	1
Nearside Front Direction indicator not working \|1.4.A.2c\|	1
Nearside rear brake recording little or no effort \|3.7.B.5a\|	1
Position lamp switch faulty \|1.1.A.1\|	1
Registration plate lamp issues	1
Nearside Front Headlamp not working on main beam \|1.7.5a\|	1
Offside Front Headlamp not working on main beam \|1.7.5a\|	1
Nearside Front Direction indicator adversely affected by the operation of another lamp \|1.4.A.2h\|	1
Nearside Rear Direction indicator adversely affected by the operation of another lamp \|1.4.A.2h\|	1
Front All position lamps not working \|1.1.A.3b\|	1
Rear All position lamps not working \|1.1.A.3b\|	1
Headlamp not working on dipped beam \|1.7.5a\|	1
Headlamp not working on main beam \|1.7.5a\|	1
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Nearside Headlamp not working on main beam \|1.7.5a\|	1
Offside Headlamp not working on main beam \|1.7.5a\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Seat belt affected by an insecure seat fixing \|5.2.1b\|	1
Offside Front Seat belt affected by an insecure seat fixing \|5.2.1b\|	1
Nearside Rear Brake pipe inadequately supported \|3.6.B.1\|	1
Offside Rear Brake pipe inadequately supported \|3.6.B.1\|	1
Offside Front front brake binding \|3.7.B.1\|	1
Lower Towbar fixing obviously of an inappropriate size \|6.6.2\|	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Steering system has excessive free play detected at the steering wheel \|steering box fitted\| \|2.2.A.1a\|	1

MOT History from tests of petrol LAND ROVER SERIES 2As year 1961

Find us on Facebook