Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Windscreen wiper does not clear the windscreen effectively | 4 |
Brake pipe excessively corroded | 4 |
Horn not working |1.6.2a| | 3 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Offside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Steering box has relative movement between sector shaft and the drop arm |2.2.B.1b| | 1 |
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis out rigger holed under seat belt anchorage |7.1.1 |a| |i|| | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger holed near body mount |6.1.1 |c| |i|| | 1 |
Nearside Rear Upper Shock absorbers has an excessively worn bush |5.3.2 |c|| | 1 |
Offside Rear Upper Shock absorbers has an excessively worn bush |5.3.2 |c|| | 1 |
Offside Rear Towbar excessively corroded within 30cm of towbar mounting holed on underside of rear cross member |6.1.6 |i| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed near upper shock mount |5.3.6 |a| |i|| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Nearside Front Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Nearside Front Track rod end ball pin shank loose |2.2.B.1c| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear brake application uneven | 1 |
Registration plate lamp issues | 1 |
Nearside Rear Upper Shock absorber insecure |2.7.2b| | 1 |
Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Power steering component|s| leaking from a failed seal |2.3.3b| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |