| Most common failures | No# failures |
|---|
| Parking brake lever has no reserve travel |3.1.6b| | 4 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 4 |
| Headlamp aim out of alignment | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Registration plate lamp issues | 3 |
| Windscreen wiper does not clear the windscreen effectively | 3 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Front brake application uneven | 1 |
| Nearside Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
| Offside Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
| Driver`s seat insecure |6.2.A.1| | 1 |
| Passenger`s seat insecure |6.2.A.1| | 1 |
| Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Offside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
| Horn sounds harsh or grating |1.6.2e| | 1 |
| Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Track rod end loose in track rod tube |2.2.B.1d| | 1 |
| Brake hose excessively deteriorated | 1 |
| Towbar assembly inappropriately modified |6.6.7| | 1 |
| Rear fog lamp switch inoperative |4.5.3 |a| |ii|| | 1 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Offside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Service brake is causing the vehicle to swerve to the nearside |3.7.C.2| | 1 |
| Registration plate issues | 1 |
| Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Parking brake lever, pawl mechanism pivots or their associated mountings are insecure |3.1.4b| | 1 |
| Rear brake application uneven | 1 |
| Offside Headlamp not in good working order |not working| |1.2.4a| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Horn not working |1.6.2a| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Rear brake binding | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both N/S and O/S front and rear spring mounts areas chalked need welding |2.4.A.3| | 1 |
| Front Suspension spring mounting prescribed area is excessively corroded both N/S and O/S front most spring mount areas chalked need welding |2.4.A.3| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings central and rear chassis all areas chalked need welding |6.1.B.2| | 1 |
| Brakes imbalanced across an axle | 1 |
| Headlamp aim beam image obviously incorrect both |1.8.A.1b| | 1 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear fog lamp missing |1.3.2a| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |