Most common failures | No# failures |
---|
Nearside Stop lamp not working |1.2.1b| | 3 |
Offside Stop lamp not working |1.2.1b| | 3 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 3 |
Headlamp aim out of alignment | 3 |
Horn not working |1.6.2a| | 2 |
Offside Front Direction indicator not working |1.4.A.2c| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Registration plate lamp issues | 2 |
Stop lamp remains on when the brakes are released | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Brakes imbalanced across an axle | 1 |
Nearside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
Battery insecure |1.9.1| | 1 |
Rear brake binding | 1 |
Brake hose excessively deteriorated | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Brake hose bulging under pressure (1.1.12 (d)) | 1 |
Nearside Front Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rear spring front mount (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger rear spring front mount (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger on top rear spring front mount (5.3.6 (a) (i)) | 1 |
Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Service brake is causing the steering wheel to severely pull one way |3.7.C.2| | 1 |
Offside Windscreen wiper blade missing |8.2.2| | 1 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Registration plate issues | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake pipe excessively corroded | 1 |
Fuel tank leaking |7.2.3| | 1 |
Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Exhaust has a part missing |7.1.1a| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Nearside Front Braking system leaking |3.6.A.1| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Headlamp aim not tested |1.8.A.1c| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Nearside Rear Direction indicator incomplete |1.5.A1b| | 1 |
Offside Rear Direction indicator incomplete |1.5.A1b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Offside Obligatory mirror insecure |8.1.1| | 1 |
Emissions not tested |7.0| | 1 |
Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Front Headlamp not working on main beam |1.7.5a| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Fuel tank leaking (6.1.3 (b) (i)) | 1 |
Offside Rear Shock absorbers has a serious fluid leak | 1 |
Service brake is causing the vehicle to swerve to the offside (1.2.1 (b) (i)) | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Rear Wheel nut|s| loose |4.2.A.1e| | 1 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Central Seat belt missing |7.1.2 |a|| | 1 |
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near side lower and upper bulkhead |5.3.6 |a| |i|| | 1 |
Offside Front Service brake grabbing severely |1.2.1 |c|| | 1 |
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 1 |
Offside Headlamp insecure |1.7.3| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Parking brake lever releases when knocked |3.1.6a| | 1 |
Nearside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |