Most common failures | No# failures |
---|
Headlamp aim out of alignment | 4 |
Registration plate lamp issues | 4 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Horn not working |1.6.2a| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded spring |2.4.A.3| | 1 |
Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded spring |2.4.A.3| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Torsion bar deteriorated by corrosion so that its cross sectional area is reduced and seriously weakened front crossmember |2.4.E.1b| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Front Wheel nut|s| loose |4.2.A.1e| | 1 |
Front Statutory seat belt missing |5.1.1| | 1 |
Steering component is not secure to the vehicle structure steering relay insecure to chassis and bracket bolts very loose |2.2.B.1a| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded shock abs |2.4.A.3| | 1 |
Nearside Rear brake drum contaminated by oil |3.5.1h| | 1 |
Nearside Rear Rear reflector missing |1.5.1a| | 1 |
Offside Rear Rear reflector missing |1.5.1a| | 1 |
Steering system has excessive free play detected at the steering wheel |steering box fitted| |2.2.A.1a| | 1 |
Steering box has relative movement between sector shaft and the drop arm |2.2.B.1b| | 1 |
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
Service brake is causing the vehicle to swerve to the nearside |3.7.C.2| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Leaf spring fractured |2.4.B.1a| | 1 |
Offside Rear Leaf spring splayed and action impaired |2.4.B.1c| | 1 |
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Offside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Hazard warning lamps inoperative |1.4.B.1b| | 1 |
Nearside Rear Direction indicator missing |1.4.A.2b| | 1 |
Offside Rear Direction indicator missing |1.4.A.2b| | 1 |
Nearside Front Direction indicator incomplete |1.5.A1b| | 1 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Headlamp aim not tested |1.8.A.1c| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor where body and chassis is connected |6.1.B.2| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Front Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
Offside Front Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
Rear Rear position lamp|s| not working Both |1.1.A.3b| | 1 |
Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor where body and chassis is connected |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis support bar where body and chassis connected |6.1.B.2| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
Nearside Front Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Front Drag link end loose |2.2.B.1d| | 1 |
Headlamp not in good working order |not working| |1.2.4a| | 1 |
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Registration plate issues | 1 |
Offside Rear Braking system leaking |3.6.A.1| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |