Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Windscreen wiper does not clear the windscreen effectively | 5 |
Brakes imbalanced across an axle | 3 |
Windscreen washer not working | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Steering box has relative movement between sector shaft and the drop arm |2.2.B.1b| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
Stop lamp not working |1.2.1b| | 2 |
Intermediate drop arm insecure |2.2.B.1a| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Registration plate lamp issues | 2 |
Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 2 |
Offside Rear brake drum contaminated by oil |3.5.1h| | 2 |
All position lamps not working |4.2.1 |a|| | 1 |
Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Windscreen wiper not working |3.4 |a|| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Headlamp not working on dipped beam both |1.7.5a| | 1 |
Headlamp adversely affected by the operation of another lamp both |1.7.5c| | 1 |
Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
Nearside Front Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Front Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Steering box insecure |2.2.B.1a| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Steering wheel locking device insecure |2.1.6| | 1 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Front brake application uneven | 1 |
front brakes release unevenly |3.7.B.4| | 1 |
Nearside Front Braking system leaking |3.6.A.1| | 1 |
Nearside front brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Front Axle swivel joint has excessive play |2.5.A.3b| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 1 |
Vehicle structure excessively corroded within 30cm of towbar mounting rear cross chassis |6.6.6| | 1 |
Body insecure and dangerous to other road users top roof bars |6.1.B.1b| | 1 |
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
Fuel tank leaking |7.2.3| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Indicator switch faulty |1.4.A.1| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear Braking system leaking |3.6.A.1| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Front Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Direction indicators not working |1.4.A.2c| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Headlamp switch faulty |1.7.1| | 1 |
Brake pedal excessively corroded |3.3.A.1a| | 1 |
Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Headlamp insecure |1.7.3| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Rear Direction indicator incomplete |1.5.A1b| | 1 |
Brake master cylinder fluid level below minimum level |3.6.G.1e| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Nearside Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
Offside Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
Brake servo vacuum pipe deteriorated |3.6.C.1b| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
Exhaust has a major leak of exhaust gases front pipe to manifold |6.1.2 |a|| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear brake application uneven | 1 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt 3 steering joints |2.2.C.1c| | 1 |
Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Horn not working |1.6.2a| | 1 |