MOT History from tests of petrol LAND ROVER LANDROVERs year 1968

Review the list of common LAND ROVER LANDROVER failures below or to perform a specific mot history check on your LAND ROVER then use our popular KnowYourCar service

mot history

Pass percent:76.32%

(The average a petrol LAND ROVER LANDROVER year 1968 passes without issue)

Based on:38 MOT Tests

Most common failures	No# failures
Front brake application uneven	3
Brakes imbalanced across an axle	2
Front Electrical wiring insecure \|1.9.2a\|	1
Electrical wiring insecure \|1.9.2a\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Nearside Front passenger door pillar insecure \|6.2.B.2\|	1
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Windscreen has damage	1
Nearside Drag link end ball joint has excessive play \|2.2.B.1f\|	1
Hazard warning switch faulty \|1.4.B.1d\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Offside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Seat belt locking mechanism does not secure or release \|5.2.5a\|	1
Rear brake application uneven	1
Nearside Rear Suspension spring mounting prescribed area is inadequately repaired \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is inadequately repaired \|2.4.A.3\|	1
Offside Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	1
Nearside Front Position lamp missing \|4.2.1 \|a\|\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Seat belt locking mechanism does not secure or release \|5.2.5a\|	1
Nearside Front Headlamp not working on main beam \|1.7.5a\|	1
Offside Front Headlamp not working on main beam \|1.7.5a\|	1
Nearside Front Front wheel bearing has excessive play \|2.5.A.3c\|	1
Offside Front Front wheel bearing has excessive play \|2.5.A.3c\|	1
Nearside Front Axle has inadequate clearance with the bump stop \|2.4.A.1a\|	1
Offside Front Axle has inadequate clearance with the bump stop \|2.4.A.1a\|	1
Nearside Rear Rear reflector missing \|1.5.1a\|	1
Offside Rear Rear reflector missing \|1.5.1a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Front brake application uneven	3
Brakes imbalanced across an axle	2
Front Electrical wiring insecure \|1.9.2a\|	1
Electrical wiring insecure \|1.9.2a\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Nearside Front passenger door pillar insecure \|6.2.B.2\|	1
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Windscreen has damage	1
Nearside Drag link end ball joint has excessive play \|2.2.B.1f\|	1
Hazard warning switch faulty \|1.4.B.1d\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Offside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Seat belt locking mechanism does not secure or release \|5.2.5a\|	1
Rear brake application uneven	1
Nearside Rear Suspension spring mounting prescribed area is inadequately repaired \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is inadequately repaired \|2.4.A.3\|	1
Offside Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	1
Nearside Front Position lamp missing \|4.2.1 \|a\|\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Seat belt locking mechanism does not secure or release \|5.2.5a\|	1
Nearside Front Headlamp not working on main beam \|1.7.5a\|	1
Offside Front Headlamp not working on main beam \|1.7.5a\|	1
Nearside Front Front wheel bearing has excessive play \|2.5.A.3c\|	1
Offside Front Front wheel bearing has excessive play \|2.5.A.3c\|	1
Nearside Front Axle has inadequate clearance with the bump stop \|2.4.A.1a\|	1
Offside Front Axle has inadequate clearance with the bump stop \|2.4.A.1a\|	1
Nearside Rear Rear reflector missing \|1.5.1a\|	1
Offside Rear Rear reflector missing \|1.5.1a\|	1

MOT History from tests of petrol LAND ROVER LANDROVERs year 1968

Find us on Facebook