Most common failures | No# failures |
---|
Brake pipe excessively corroded | 10 |
Headlamp aim out of alignment | 6 |
Registration plate lamp issues | 5 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 4 |
Emissions not tested |7.0| | 4 |
Parking brake: efficiency below requirements |3.7.C.1b| | 3 |
Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 3 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Windscreen wiper does not clear the windscreen effectively | 3 |
All position lamps not working |1.1.A.3b| | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Windscreen wiper blade insecure | 2 |
Rear brake binding | 2 |
Registration plate issues | 2 |
Rear fog lamp switch missing |1.3.1a| | 2 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 2 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 2 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 2 |
Rear Stop lamp not working |1.2.1b| | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Obligatory mirror missing |8.1.1| | 1 |
Offside Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Nearside Front position lamp|s| missing |1.1.A.3a| | 1 |
Offside Front position lamp|s| missing |1.1.A.3a| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Nearside Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Offside Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Vehicle structure fractured seriously affecting its strength within 30cm of towbar mounting |6.6.6| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Rear Upper Shock absorber has an excessively worn bush |2.7.4| | 1 |
Steering box has relative movement between sector shaft and the drop arm |2.2.B.1b| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Bootlid cannot be secured in the closed position |6.4.1| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Position lamp switch missing |1.1.A.1| | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Headlamp switch missing |1.7.1| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Horn not working |1.6.2a| | 1 |
Hazard warning switch missing |1.4.B.1d| | 1 |
Hazard warning lamps inoperative |1.4.B.1b| | 1 |
Offside Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
Centre Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
Nearside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Offside Rear fog lamp not working Rear fog lamp switch operates N/S reverse lamp!! |4.5.1 |a| |ii|| | 1 |
Rear Upper Shock absorbers has an excessively worn bush O/S & N/S |5.3.2 |c|| | 1 |
Nearside Rear Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
Nearside Rear Anti-roll bar damaged and seriously weakened linkage been running loose - hole worn/elongated |5.3.3 |b| |i|| | 1 |
Exhaust emissions hydrocarbon content excessive |8.2.1.2 |b|| | 1 |
Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Rear Body has a projection caused by corrosion |6.1.C.1| | 1 |
Nearside Inner Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Seat belt retracting mechanism defective |5.2.5b| | 1 |
Offside Rear Seat belt retracting mechanism defective |5.2.5b| | 1 |
Service brake juddering severely |3.7.C.2| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Exhaust catalytic converter missing where one was fitted as standard |7.1.3| | 1 |
Anti-lock braking system warning lamp indicates an ABS fault | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Windscreen has damage | 1 |
Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Headlamp not in good working order |not working| |1.2.4a| | 1 |
Headlamp aim not tested |1.8.A.1c| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Bonnet retaining device ineffective |8.4.2| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Body has a projection caused by damage |6.1.C.1| | 1 |
Offside Rear Body has a projection caused by damage |6.1.C.1| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Offside Rear position lamp|s| incomplete |1.1.4a| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Fuel system component insecure |7.2.1| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Rear Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.D.1| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Bonnet cannot be secured in the closed position |8.4.1| | 1 |
Rear fog lamp tell tale missing |1.3.1b| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Rear Exhaust has a part missing |7.1.1a| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Offside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front wheel cylinder has restricted free movement |3.5.1k| | 1 |
Brakes imbalanced across an axle | 1 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |