Most common failures | No# failures |
---|
Brake pipe excessively corroded | 5 |
Horn not working |1.6.2a| | 5 |
Headlamp aim out of alignment | 4 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 4 |
Rear fog lamp not working |1.3.2b| | 3 |
Registration plate lamp issues | 3 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 3 |
Nearside Headlamp not working on main beam |1.7.5a| | 3 |
Rear fog lamp tell tale not working |1.3.1b| | 2 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Brakes imbalanced across an axle | 2 |
Stop lamp|s| all not working |4.3.1 |a| |iii|| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Shock absorber detached |2.7.2b| | 1 |
Nearside Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Exhaust emits visible black smoke at idle |7.3.A.2b| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded Offside front inner arch |3.6.C.3| | 1 |
Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Offside Front Brake pipe inadequately supported Hose to wheel cylinder |3.6.B.1| | 1 |
Nearside Front Brake pipe inadequately supported Hose to wheel cylinder |3.6.B.1| | 1 |
Offside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Front Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear reflector missing |1.5.1a| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Headlamp switch faulty |1.7.1| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Windscreen washer not working | 1 |
Nearside Front Windscreen wiper not working (3.4 (a)) | 1 |
Offside Front Windscreen wiper not working (3.4 (a)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Exhaust emissions - engine idle speed too high (8.2.1.2 (e)) | 1 |
Valve stem seriously damaged both rear (5.2.3 (j)) | 1 |
Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 1 |
Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Nearside Front Passenger`s seat insecure |6.2.A.1| | 1 |
Direction indicators not working switch loose or broken |1.4.A.2c| | 1 |
Stop lamp not working Both |1.2.1b| | 1 |
Nearside Front Body has a sharp edge caused by damage bumper bent and bumpet sharp end |6.1.C.1| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded X member |2.4.A.3| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded x member |2.4.A.3| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis holed same on offside |2.4.A.3| | 1 |
Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
Drive shaft uj which forms part of the suspension has excessive play in a universal joint rear |2.4.G.4b| | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Battery insecure |1.9.1| | 1 |
Electrical wiring insecure |1.9.2a| | 1 |
Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |