Most common failures | No# failures |
---|
Headlamp aim out of alignment | 31 |
Windscreen wiper does not clear the windscreen effectively | 10 |
Brake pipe excessively corroded | 9 |
Windscreen washer not working | 6 |
Registration plate lamp issues | 6 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 5 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 5 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 5 |
Registration plate issues | 5 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 4 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 4 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 4 |
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 4 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 3 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 3 |
Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
Front Fuel system component leaking (6.1.3 (b) (i)) | 2 |
Brake hydraulic reservoir fluid not visible (1.1.10 (d) (iii)) | 2 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Offside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c)) | 2 |
Nearside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 2 |
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 2 |
All direction indicators not working (4.4.1 (a) (ii)) | 2 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 2 |
Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 2 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
Windscreen wiper not working (3.4 (a)) | 2 |
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Offside Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt drop arm ball joint (2.1.3 (g) (ii)) | 1 |
Nearside Front Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Offside Front Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i)) | 1 |
Exhaust emissions exceed level of metered smoke for a non-turbo charged engine (8.2.2.2 (b)) | 1 |
Brakes imbalanced across an axle | 1 |
Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt At steering box (2.1.3 (g) (ii)) | 1 |
Brake disc contaminated both front inner faces of brake discs contaminated by grease/oil. (1.1.14 (b)) | 1 |
Position lamp switch cannot be operated from the normal driving position Missing (4.2.2 (b)) | 1 |
Position lamp not working All front and rear (4.2.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp not working on dipped beam Nearside and offside (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam Nearside and offside (4.1.1 (a) (ii)) | 1 |
Nearside Headlamp reflector seriously defective (4.1.1 (b) (ii)) | 1 |
Offside Front Seat belt anchorage loose (7.1.1 (b)) | 1 |
Offside Front Seat belt not functioning as intended (7.1.2 (c)) | 1 |
Offside Front Suspension arm pin or bush excessively worn To axle (5.3.4 (a) (i)) | 1 |
Power steering malfunctioning (2.1.5 (a)) | 1 |
Nearside Front Steering component mounting prescribed area is excessively corroded Chassis (2.1.2 (e) (i)) | 1 |
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor (6.1.1 (c) (i)) | 1 |
Bonnet cannot be secured in the closed position (3.1 (b) (i)) | 1 |
Emissions not tested due to alternator belt insecure (8.2.2.2 (e)) | 1 |
Brake pipe leaking on a hydraulic braking system main front to rear (1.1.11 (b) (ii)) | 1 |
Exhaust emissions exceed manufacturers specified limit plate limit 1.68 (8.2.2.2 (a)) | 1 |
Brake hose excessively deteriorated | 1 |
Nearside Rear Shock absorbers has a serious fluid leak | 1 |
Nearside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
Steering box has excessive free play detected at the steering wheel to the extent that safe steering is affected (steering box fitted) (2.3 (a) (ii)) | 1 |
Power steering inoperative (2.1.5 (c) (i)) | 1 |
Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Nearside Rear Reversing lamp inoperative (4.6.1 (a)) | 1 |
Headlamp levelling device inoperative (4.1.5 (a)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Prop shaft securing bolt loose (6.1.7 (a) (i)) | 1 |
Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
Suspension component ball joint dust cover no longer prevents the ingress of dirt rear axle (5.3.4 (b) (ii)) | 1 |
Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users (8.2.2.2 (c)) | 1 |
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b)) | 1 |
Reversing lamp inoperative (4.6.1 (a)) | 1 |
Nearside Front Steering linkage ball joint has excessive play Forward arm (2.1.3 (b) (i)) | 1 |
Offside Front Steering linkage ball joint has excessive play Forward ball joint (2.1.3 (b) (i)) | 1 |
Nearside Front Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
Offside Front Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
Nearside Rear Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
Offside Front Suspension rod insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 1 |
Steering wheel has movement relative to the column indicating looseness (2.2.1 (a) (i)) | 1 |
Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Central Rear Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Headlamp not working on main beam both loose connection (4.1.1 (a) (ii)) | 1 |
Offside Rear Lower Shock absorbers insecurely attached (5.3.2 (a) (i)) | 1 |
Rear Shock absorbers has an excessively worn bush both sides,lower bushes (5.3.2 (c)) | 1 |
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Front Track rod end ball joint worn to the extent there is a serious risk of detachment both front arm track end ball joints (2.1.3 (b) (ii)) | 1 |
Rear Suspension component pin or bush excessively worn both rear lower shock absorber bushes have excessive movement (5.3.4 (a) (i)) | 1 |
Position lamp not working All (4.2.1 (a) (ii)) | 1 |
Fluid leak harmful to the environment or a risk to other road users fuel/diesel leak from engine (8.4.1 (a) (i)) | 1 |
Exhaust emissions exceed default limit of 0.7m-1 (8.2.2.2 (b)) | 1 |
Rear Suspension arm ball joint dust cover no longer prevents the ingress of dirt A frame (5.3.4 (b) (ii)) | 1 |
Nearside Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Brake servo defective or ineffective (1.1.10 (a) (i)) | 1 |
Nearside Suspension arm pin or bush excessively worn panhard rod bush (5.3.4 (a) (i)) | 1 |
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii)) | 1 |
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Front Prop shaft joint so worn it is likely to fail transfer box prop-shaft (6.1.7 (c) (ii)) | 1 |
Steering locking device missing both front track rod end securing nuts minus split pins (2.1.3 (d)) | 1 |
Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Central Rear Lower Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 1 |
Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis ends (6.2.2 (d) (i)) | 1 |
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis ends (6.2.2 (d) (i)) | 1 |
Emissions not tested (8.2.1.2 (d)) | 1 |
Seat belt missing rear stalk missing (7.1.2 (a)) | 1 |
Headlamp light source and lamp not compatible kick up wroung direction (4.1.4 (c)) | 1 |
Rear Suspension arm likely to become detached rear upper a frame bolts (5.3.3 (a) (ii)) | 1 |
Headlamp aim projected beam image is obviously incorrect Both (4.1.2 (c)) | 1 |
Offside Rear Direction indicator not working Holder corroded away (4.4.1 (a) (ii)) | 1 |
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded bulkhead (1.1.21 (e) (i)) | 1 |
Fuel pipe leaking around no3 injector area ? (running down o/s of engine ) (6.1.3 (b) (i)) | 1 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Offside Rear Brake disc contaminated (1.1.14 (b)) | 1 |
Offside Front Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b)) | 1 |
Electronic stability control warning lamp indicates a fault (7.12 (e)) | 1 |
Nearside Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Front Seat belt flexible stalk damaged (7.1.2 (b) (i)) | 1 |
Offside Drag link end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Offside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
Offside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |